• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.295-298
• /
• 2008

A new Cymbidium cultivar 'White Princess' was released by the National Horticultural Research Institute (NHRI) in 2005. A cross was made in 1995 between 'Cymbidium 2113', light purple colored petal and medium plant sized variety, and 'Lucky Rainbow Randevous', a dark purple petal with red lip and large type variety. The ninety progenies were obtained after planting and acclimatization in green house. In 2000, a line (9526747) was selected and multipliticed after test of its flower color, leaf shape, flower stalk, and vigorous growing habit. After evaluation trial for two growing seasons, the selected line was named as 'White Princess'. The 'White Princess' has white petals (WN 155A) with red lip (RP59D) color and large sized leaves, and flowers (leaf length is about 88 cm and flower diameter is about 8 cm) with semi-erect flower stalks. Blooming started from December to January in optimal culture conditions. High temperature (more than $30^{\circ}C$) and low light intensity(less than 10,000Lux) should be avoided for the appropriate growth.

• Journal of Technologic Dentistry
• /
• v.43 no.3
• /
• pp.77-83
• /
• 2021

Purpose: The purpose of this in vitro study was to measure and compare the thickness-dependent color dimensions of digital light processing (DLP) three-dimensional (3D) printer and conventional interim restorative resin. Methods: Specimens (N=60) were fabricated using either subtractive manufacturing (S group) or DLP 3D printing (D group) material. All milled and 3D-printed specimens were allocated into three different groups (n=10) according to different thicknesses as follows: 1.0, 1.5, and 2.0 mm. Color measurements in the CIELab coordinates were made using a spectrophotometer under room light conditions (1,003 lux). The color differences (𝚫E^*) between the specimen and control target data were calculated. Data were analyzed using the oneway analysis of variance (ANOVA). Post hoc comparisons were conducted using Tukey's honestly significant difference method (α=0.05 for all tests). Results: The 𝚫L^*, 𝚫a^*, 𝚫b^*, and 𝚫E^* values of interim restorative resin produced by DLP 3D printing were obtained in terms of the specimen's thickness increased compared with the increases by subtractive manufacturing. When the thickness was similar, the color difference between subtractive manufacturing and DLP 3D printing was ≥5.5, which is a value required by the dentist for remanufacturing. Conclusion: Color was influenced by the thickness of the interim restorative resin produced by DLP 3D printing.

• Journal of Environmental Science International
• /
• v.28 no.3
• /
• pp.321-328
• /
• 2019

This study aimed to analyze the growth and physical responsees of Dracaena braunii in response salt accumulation in ornamental water culture and to examine the effect of activated carbon on this growth response. The experiment was conducted in a plant growth chamber and the indoor environmental conditions of the chamber were set at $23{\pm}1^{\circ}C$ temperature, $70{\pm}3%$ humidity, and 1,000 lux brightness. The observation of the growth response of plants in the presence of activated carbon showed that the pH with activated carbon maintained sub-acidic to neutral (6.27~7.32) conditions and showed decreased electric conductivity in the media. As the treatment with added activated carbon showed good growth and physical responses, this indicated that absorption effect of activated carbon had a positive influence on the growth of plants. However, as the absorption effect of activated carbon may decrease over time and the use of high concentrations of activated carbon might cause nutrition shortage, various concentration of activated carbon and their absorption effects need to be investigated in the future.

• CELLMED
• /
• v.11 no.4
• /
• pp.18.1-18.8
• /
• 2021

Jawarishe Jalinoos (JJ) is an orally used formulation available in semisolid dosage form, prepared with powdered plant materials mixed in honey or sugar syrup. It has many admirable pharmacological effects and used in Unani medicine to treat various acute and chronic disorders since ancient times. The ICH Harmonised Tripartite Guideline stated that photostability testing should be an essential part of stability testing to confirm that light exposure does not result in an unacceptable change in drugs substance and finished products. To date, the effect of light on JJ is not studied, in this study photostability evaluation of JJ was carried out. The test sample was manufactured with genuine ingredients in the in-door pharmacy of the National Institute of Unani Medicine. JJ was packed in two transparent polyethylene terephthalate airtight containers. The first sample was analysed at zero-day and the second sample was placed in a stability chamber subjected to light challenge with an overall illumination of 1.2 million lux hours combined with near ultraviolet energy of 200-watt hours per square meter by using option 2, along with 30±2℃ temperature and relative humidity 70±5%. Analysis of both finished products showed no considerable changes in organoleptic characters. Less than 5% variation was observed in physicochemical parameters. HPTLC fingerprinting showed justifiable variation. Microbial load and specific counts were within the limit prescribed by WHO. As no unacceptable changes were noted in JJ subjecting to light challenge, it is concluded that JJ is a photostable Unani compound formulation.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.891-897
• /
• 2021

There is a need for a technology that can quickly and accurately analyze soil carbon contents. Existing soil carbon analysis methods are cumbersome in terms of professional manpower requirements, time, and cost. It is against this background that the present study leverages the soil physical properties of color and water content levels to develop a model capable of predicting the carbon content of soil sample. To predict the total carbon content of soil, the RGB values, water content of the soil, and lux levels were analyzed and used as statistical data. However, when R, G, and B with high correlations were all included in a multiple regression analysis as independent variables, a high level of multicollinearity was noted and G was thus excluded from the model. The estimates showed that the estimation coefficients for all independent variables were statistically significant at a significance level of 1%. The elastic values of R and B for the soil carbon content, which are of major interest in this study, were -2.90 and 1.47, respectively, showing that a 1% increase in the R value was correlated with a 2.90% decrease in the carbon content, whereas a 1% increase in the B value tallied with a 1.47% increase in the carbon content. Coefficient of determination (R²), root mean square error (RMSE), and mean absolute percentage error (MAPE) methods were used for regression verification, and calibration samples showed higher accuracy than the validation samples in terms of R² and MAPE.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.151-155
• /
• 1996

For improvement germination rate of Cirsium setidens, wet seeds were storaged for 20 to 80 days at $4^{\circ}C$ and germinated at $18^{\circ}C$ in the dark or light condition. To assess the effects of shading and plant age on the growth, fresh yield and seed yield under rain shelter in highland at altitude of 800m above sea level, seeds were sown in an open field in late september,1990. In early May the next the seedlings were transplanted for vegetatable and seed production in the plastic houses for rain shelter. They were grown from 1991 to 1993 in the houses covered with the shading nets ranging from 0 to 70% for vegetable production and 0 to 50% for seed production. Germination rate inceased as the storage period lengthened, and the rate came to $60\sim80%$ at 60days after germination. It was more effective in lighting than in darkness. For vegetable production, the shading net treatments showed more values in almost the characters checked at the third year than the non-shading treatment. No. of stem, no, of leaves, stem length and degree of softening were no different between shading net treatments, but the other characters were significantly different. Ratio of survival, density of chlorophyll and ratio of dry matter of plants were highest in the plots of 50%, 70%, and 30% of shading, respectively. The highest fresh yield was recorded from 2-year plants, 70% of shading from them showed the greatest yield. The highest seed yields were produced 2-year-old plants of non-shading plot. For seed production, the non-shading treatment is best, and the highest seed yields were obtained in both the second and third years.

• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.145-154
• /
• 2011

Shiitake mushroom (Lentinula edodes) is usually cultivated on the oak log. Log cultivation of this mushroom is getting difficult to get oak logs and has a weak point of its long cultivation period. Recently sawdust cultivation is getting increase. It is important to make mycelia browning on the substrate surface. This browned surface in sawdust cultivation plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. The period for mycelia browning is so long that the sawdust cultivation of Shiitake mushroom can not spread well into the mushroom farms. The development of methods for the rapid mycelia browning is quite required. In this article we would like to find cultural characteristics of collected strains and to see the correlation with mycelial browning. Mycelial growth in the media was different according to kinds of media and strains. The optimal temperature on mycelial growth was $20-25^{\circ}C$. Browning patterns of mycelium under 200 Lux seemed to be used for a key to differentiate the strains for sawdust cultivation. Browning period was 30-40 days in the agar media and 70-100 days in the sawdust bag cultivation. When we considered the productivity and the other characteristics, ASI 3046 is the best for the bag cultivation. Significance between mycelial growth and browning was not accepted, but that of mycelial growth between on PDA and sawdust was accepted. Browning period on the PDA and sawdust showed a strong relationships. These results suggested that the browning habits could not be depend on the difference of media, but on their own properties. To select the strain showed fast browning can be done by using agar media for saving time.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.211-217
• /
• 1997

The physical and chemical stability of anthocyanins from a Korean pigmented rice variety was investigated at various conditions of pH, temperature, metal ion, sugar, organic acid and light. The anthocyanin pigments were relatively stable with half-lives of 36 days (pH 2.0) and 17 days (pH 3.0), while they were decomposed in a day at neutral and basic pH of 7.0 and 9.0 at $25^{\circ}C$. The anthocyanins also showed high thermal stability at pH 3.0; the half-lives were 7.4 hr, 23.6 hr and 96.3 hr at $95^{\circ}C,\;75^{\circ}C\;and\;50^{\circ}$, respectively. Addition of di- and tri-valent metal ions at pH 3.0 resulted in the increase of color intensity and stability throughout 21 days of storage periods at $25^{\circ}C$. Most sugars added accelerated the degradation of anthocyanin pigments, so that fructose showed the greatest degradation effect on the pigments. Addition of citric acid at pH 3.0 increased stability of anthocyanins, while tartaric acid decreased stability. The anthocyanins were very sensitive on light irradiation with a degradation half-life of 14 hr under 20,000 lux-light dosage at pH 3.0.

• Korean Journal of Poultry Science
• /
• v.37 no.4
• /
• pp.383-388
• /
• 2010

The chicken eye can discriminate light color, and different light wavelengths may affect reproduction ability. This study was carried out to identify effect of monochromatic light using light emitting diode (LED) in laying hens. Chickens were exposed to white light (WL), blue light (BL), yellow light (YL), green light (GL) and red light (RL) made by using LED as well as incandescent light (IL) (control). All light sources were equalized to a light intensity of 20 lux. The results indicated that the age of first egg laying and 50 % egg laying in laying hens treated under RL is significantly younger than under other lights (P<0.05). And the ovary weight of laying hens reared under RL is significantly heavier than under other at from 16 to 20 wks (P<0.05). The largest number of eggs production was produced in a group with treated with RL by 59 wks of age compared with any other group. The egg weight of YL was greater than other treatment groups from 26 to 45 wks (P<0.05). The egg shell from hens treated with RL was the strongest and thickest at 20 wk (P<0.05). These results suggest that the egg quality of laying hens reared in different spectrum of LED can be different and RL may enhance the laying performance.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.154-161
• /
• 1998

To investigate whether the introduced genetic marker is useful to detect the survivalship and activity of the natural bacteria under the stressed conditions, one Gram-negative isolate, KP964 was transformed to the luminous phenotype by transferring luxAB gene. Under the starvation-stress this luminous bacterial culturability (determined by colony-forming-units [CFU] on agar plate) decreased rapidly below the detection limit by 37 days, while its total cell number (determined by AODC) remained almost the same as its initial inocular size. At that time period, the viable cell number was estimated to be 1400 times higher than its CFU number. The bioiuminescence (determined by relative light units [RLU]) produced under the same condition was also monitored and found to decrease more rapidly than the culturability by 5-fold. Under the other stresses, e.g., osmotic shocks, acid shock, and exposure to toxic chemicals, this bacterial strain did not show the reliable correlation between CFU and RLU. These results might not suggest the direct estimation of bioiuminescence from the stressed bacteria be an index of both the survivalship and its activity. However, when the stressed bacterial cells were incubated under the favorable condition by relieving from the existing stress, the potential bioiuminescence (the lag periods before the increase of bioiuminescence, the increase rates of bioiuminescence, and the maximal levels of bioiuminescence) was shown to be highly dependent upon the strengths of the stresses exposed to the bacterial cells. Therefore, analysis of the potential bioiuminescence from the stressed bacteria revealed good relationships with survival as well as activity.