• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1985-1991
• /
• 1999

본 논문은 HANbit ACE64 ATM 교환기 시스템의 데이터 경로인 IMI(Inter Module Path)에 사용되는 고속 전송선로인 Twinax 케이블을 two-port lumped Spice-network 모델로 구현하기 위해 lumped 네트워크 요소와 수학적 함수를 사용하여 개발하였다. 사용된 요소들은 저항성분과 주파수의존 전압제어 소스로 구성되어 있고 Hspice 수학적 함수인 FREQ, DELAY, POLY를 사용하여 구현하였다. 구현된 모델을 사용하여 케이블 길이와 종류에 따른 각종 노이즈 분석을 실시하여 그 특성을 비교 분석하였다.

• 한국산업융합학회 논문집
• /
• 제12권1호
• /
• pp.27-33
• /
• 2009

In this paper, a computational analysis using a lumped system model is performed to investigate the hemodynamics of coronary circulation under the operation of T-PLS relevant to the cardiac arrest cases. The coronary circulation system is assumed to be comprised of three compartments: coronary arteries, coronary capillaries, and coronary veins. The effect of myocardial muscle contraction or relaxation is represented by temporal variations in the bias pressure. To verify the present method, we analyzed the coronary circulation for normal case and then compared the results with the existing data. Numerical results on the cardiac arrest model showed that T-PLS can increase LAD flow significantly.

• 에너지공학
• /
• 제26권2호
• /
• pp.64-72
• /
• 2017

중동지역 환경에 적합한 70 W급 LED 조명등의 성능분석을 집중변수모델을 이용하여 수행하였다. LED 조명등은 발열기판, 히프파이프, 방열판으로 구성된다. LED 조명등을 4개의 물체로 구분하고, 각각에 대해 에너지평형을 적용하여, 4개의 연립 비선형미분방정식 형태의 집중변수모델을 수립하였다. 연립 방정식의 해는 Runge-Kutta법을 이용하여 구하였다. 집중변수모델의 대류열전달계수는 다차원해석을 통하여 구하였으며, 실험결과와 비교한 결과, 발열기판은 $1.5^{\circ}C$, 상부방열판에서 $1.8^{\circ}C$의 오차를 가지며, 상대오차는 약 0.6 %임을 확인하였다. 이 모델을 이용하여 대기온도가 $55^{\circ}C$인 정상 운전조건, 태양광만 주어질 때의 조건, 태양광이 주어진 상태에서의 비정상 운전조건, 상부방열판이 없는 경우 등에 대한 온도분포분석을 수행하였다.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.400-410
• /
• 2019

In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge-Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.39-45
• /
• 2017

Combustion instability analysis of partially premixed model gas turbine combustor was conducted with 1D lumped method. Flame Transfer Function(FTF) was obtained with variation of fuel composition by Photo Multiplier Tube(PMT) and Hot Wire Anemometry(HWA). Decreasing instability frequency was observed when combustor length increased and multi-mode instability was confirmed. Instability frequency mode was changed while $H_2$ composition rate was increased and had agreement with experimental value. This work confirms that prediction of longitudinal combustion instability mode of partially premixed combustor is possible using 1D lumped method.

• 한국식품영양학회지
• /
• 제7권4호
• /
• pp.399-405
• /
• 1994

Some method was introduced to explain oxygen transfer from broth to cell during aerobic microbe cultivation. It is explained by 5 steps that how desolved oxygen can reach to cell. Among these steps film resistance was the most important factor to describe oxygen transfer. Lumped model and distributed model was introduced to explain oxygen diffusion rate and oxygen consumption rate which occurs in the microbe pellet.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.18-24
• /
• 2016

An electromagnetic linear actuator is controlled precisely and securely and is useful in devices that require linear motion. The most commonly used method in the performance verification process for an electromagnetic actuator is finite element analysis that utilizes CAE. However, finite element analysis has the disadvantage that modeling and analysis consume a lot of time. Accordingly, lumped parameter analysis can be an alternative approach to the finite element method because of its computation iteration capability with fair accuracy. In this paper, the lumped parameter model and simulation results are presented. In addition, the results of the lumped parameter analysis are compared with those obtained from finite element analysis for verification.

• 한국지리정보학회지
• /
• 제9권3호
• /
• pp.171-182
• /
• 2006

본 연구는 집중형모형으로서 저류함수법을 근간으로 수자원공사 현업에서 실시간 물관리에 사용하고 있는 KOWACO홍수분석모형을, 분포형모형으로는 실시간 홍수조절을 목적으로 미국 Oklahoma대학에서 개발된 Vflo모형을 이용하여 금강권역의 용담댐유역($930km^2$)을 대상으로 유출해석을 수행하여 양 모형의 구조적인 장단점 등을 비교분석하였다. 모의결과 경험식으로부터 구한 매개변수의 초기값을 이용한 수문곡선은 관측수문곡선과 상당한 차이를 보이고 있었으나 분포형 수문곡선의 경우 천천지점의 수문곡선은 매개변수의 추가적 보정이 필요 없을 정도로 매개변수의 초기값이 수문곡선을 잘 모의하고 있었다. 이는 매우 고무적인 결과로서 실시간 홍수모형으로서 요구되는 중요한 특성과 동시에 물리적 기반의 분포형모형의 가장 큰 장점일 수 있는 사상 독립적 유역매개변수군을 구축하는데 중요한 단서가 될 것으로 보인다.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.537-573
• /
• 2015

Multiple-step beams carrying intermediate lumped masses with/without rotary inertias are widely used in engineering applications, but in the literature for free vibration analysis of such structural systems; Bernoulli-Euler Beam Theory (BEBT) without axial force effect is used. The literature regarding the free vibration analysis of Bernoulli-Euler single-span beams carrying a number of spring-mass systems, Bernoulli-Euler multiple-step and multi-span beams carrying multiple spring-mass systems and multiple point masses are plenty, but that of Timoshenko multiple-step beams carrying intermediate lumped masses and/or rotary inertias with axial force effect is fewer. The purpose of this paper is to utilize Numerical Assembly Technique (NAT) and Differential Transform Method (DTM) to determine the exact natural frequencies and mode shapes of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and/or rotary inertias. The model allows analyzing the influence of the shear and axial force effects, intermediate lumped masses and rotary inertias on the free vibration analysis of the multiple-step beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate lumped mass with rotary inertia, the step change in cross-section, left-end support and right-end support of the multiple-step Timoshenko beam are derived from the analytical solution. After the derivation of the coefficient matrices, NAT is used to establish the overall coefficient matrix for the whole vibrating system. Finally, equating the overall coefficient matrix to zero one determines the natural frequencies of the vibrating system and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equations of the motion. The calculated natural frequencies of Timoshenko multiple-step beam carrying intermediate lumped masses and/or rotary inertias for the different values of axial force are given in tables. The first five mode shapes are presented in graphs. The effects of axial force, intermediate lumped masses and rotary inertias on the free vibration analysis of Timoshenko multiple-step beam are investigated.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.697-703
• /
• 2017

펄스형 플라즈마 추력기의 성능해석을 위해 Teflon의 승화와 이온화 모델링을 수행하였다. PPT 작동 시 발생하는 방전 전휴의 변화를 예측하기 위해 일차원 lumped circuit model을 적용하였으며 Mickeal Keidar가 제시한 테플론-플라즈마 온도에 따른 테플론 승화 모델을 적용하였다. Saha 방정식을 이용하여 테플론 구성 원소인 탄소와 불소분자의 이온화를 예측하였다. 프로그램 검증을 위해 선행실험 결과와 비교하여 유사함을 확인하였으며 PPT 작동 전압에 따른 전류 변화정도를 고찰하였다.