• 한국항해학회지
• /
• 제25권2호
• /
• pp.131-136
• /
• 2001

CATV(Cable Television) 시스템용 집중정수형 방향성 결합기의 새로운 해석법을 제안하였다. 본 논문에서는 결합선로형 방향성결합기에 대한 우·기 모드 해석법을 변성기형 방향성 결합기에 적용하였다. 측정된 우·기 모드 반사계수만을 사용하여 구한 S-파라미터의 결과와 계산치를 비교함으로서 제안된 해석법의 타당성을 입증하고, 제안된 해석법을 적용하여 설계·제작한 신호분기기는 5 MHz ∼ 4,000 MHz까지 광대역화 됨을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1217-1219
• /
• 2003

상용화되어 있는 이동통신 기기의 Front-end 부분은 듀플렉서와 필터를 포함하는 수동소자로 구성되어 있다. 듀플렉서의 임피던스 정합선로는 전송선로 이론으로부터 설계하며, 단순하게 ${\lambda}=1/4$ 파장 길이의 정합 선로를 설치하는 것이기 때문에 정합선로를 이용한 듀플렉서 성능을 극대화하기 위한 설계의 융통성이 없는게 현실이다. 이런 문제점을 해결하기 위하여 집중소자(lumped element)인 R L C를 탄성 표면파 듀플렉서 대신 스위치 모들에 적용하게 된다면 여러 가지 다양한 형태의 회로를 구현할 수 있고 회로망 내에 위치하는 집중소자의 정격을 최적화하여 스위치 모듈의 성능을 향상시킬 수 있는 가능성이 있다. 본 연구에서는 $900 MHz{\sim}2.2 GHz$의 대역에서 소형화 집적화에 적용 가능한 디바이스를 개발하기 위하여 고주파, 저진압, 저손실 스위치 모듈의 제조와 구성되는 커패시터와 인덕터의 제조와 특성에 관하여 연구하였다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.94-101
• /
• 2016

This paper shows a new magnetic field analysis of an interior permanent magnet (IPM) machines with an axial overhang structure wherein the rotor axial length exceeds that of the stator. The rotor overhang used to increase torque density of the radial flux machine is difficult to analyze because of extra consideration of axial direction, and thus it is general for machine designer to take 3-D finite element analysis (FEA) capable of considering both radial and axial complicated geometry in the machine. However, it requires too much computing time for preliminary design especially for optimization process. Therefore, in this paper a 2-D analytic method using a lumped magnetic circuit model (LMCM) is proposed to overcome the problem. For the analysis of overhang effect, the magnetic circuit is separated and solved from overhang and non-overhang regions respectively. For the validation of proposed concept, 3-D finite element analysis (FEA) is performed. From the analysis results, it is shown that our new proposed method presents good performance in terms of calculating electromotive force (EMF) and torque within a short time. Therefore, the proposed model can be useful in design of IPM with an overhang structure.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1313-1321
• /
• 2000

본 논문에서는 필터의 설계 및 구현이 용이하고 소형화가 가능한 새로운 구조의 고온초전도 마이크로스트립 형태의 의사 집중상수 소자 공진기를 제안하였다. 또한, 공진기들 사이의 비 인접 결합을 이용하여 notch를 갖는 필터특성의 7-극 대역통과 필터를 설계, 제작하였다. 7-극 notch를 갖는 필터는 두께 0.5mm, 유전율 23.5의 $LaAlO_{3}$ 기판상에 YBCO를 양면 증착하여 제작하였다. 측정결과, 절대 온도 20K에서 중심 주파수 1774MHz 차단대역(cut-off-band)에서 33㏈감쇠를 나타내었다.

• International Journal of Railway
• /
• 제4권2호
• /
• pp.34-41
• /
• 2011

Using a test run data, the dynamics of the interface between the catenary and pantograph constituting the current collection system in high-speed trains are investigated. The test run signals are analyzed to determine the dynamic parameters critical to the current collection performance. There are found to be frequency components of the pantograph motion that are dependent on train speed as well as components that are stationary such as the resonant mode of the panhead suspension in the pantograph. From contact force measurement using load cell, the mean contact force was found to be stable while the fluctuating component was found to be dependent on the range of the frequency of the pantograph motion taken into account. The finding implies that numerical investigations reported in the literature that are based on lumped element models of the catenary and/or pantograph provide accurate predictions on the mean value but are of limited use in estimating fluctuation of the contact force. It is concluded that simulation studies based on lumped-element models which do not incorporate panhead structural vibration modes is inaccurate at high train speeds.

• ETRI Journal
• /
• 제30권3호
• /
• pp.489-491
• /
• 2008

A compact dipole antenna for the terrestrial digital multimedia broadcasting (TDMB) application is presented. The length of the antenna is about $0.06{\lambda}$ at the TDMB resonance frequency of 190 MHz. Miniaturization of the antenna is achieved by using meander structures and lumped elements. The proposed antenna has two resonance frequencies and covers the TDMB band from 174 MHz to 216 MHz in Korea. The antenna has good impedance bandwidth and radiation characteristics for the TDMB. The experimental results of the designed dipole antenna are presented and analyzed.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2329-2334
• /
• 2018

This paper discusses the thermal effect of the number of permanent-magnet (PM) layers in an outer rotor machine. Depending on the number of axial-layer of PM, the operating temperature is compared analytically and experimentally. The electromagnetic analysis is performed using 3-dimensional time varying finite element method to get the heat sources depending on axial-layered PM models. Then thermal analysis is conducted using the lumped-parameter-thermal-network method for each case. Two outer rotor machines, which have the different number of axial-layer of PM, are manufactured and tested to validate the analysis results.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1261-1267
• /
• 2004

As the optical disk drives are designed for portable and hostile environment, they have a possibility to miss the track and not to read the data. The shock response of optical disk drives must be analyzed. This research shows the shock response analysis of the optical disk drive. The optical disk drive is modeled as the lumped parameter system in consideration of the pickup and the disk. The lumped parameter model is compared with finite element model in order to verify results. Finally, shock responses are compared with the change of the shock magnitude and the duration.

• Structural Engineering and Mechanics
• /
• 제25권1호
• /
• pp.75-89
• /
• 2007

Post-earthquake reconnaissance and experimental research indicate that squat reinforced concrete (RC) columns in existing buildings or bridge piers are vulnerable to non-ductile shear failure. Recently, several experimental studies were conducted to investigate upgrading the shear resistance capacity of such columns in order to modify their failure mode to ductile one. Among these upgrading methods is the use of fibre-reinforced polymer (FRP) jackets. One of the preferred analytical tools to simulate the response of frame structures to earthquake loading is the lumped plasticity macromodels due to their computational efficiency and reasonable accuracy. In these models, the columns' nonlinear response is lumped at its ends. The most important input data for such type of models is the element's lateral force-displacement backbone curve. The objective of this study is to verify an analytical method to predict the lateral force-displacement ductility relationship of axially and laterally loaded rectangular RC squat columns retrofitted with FRP composites. The predicted relationship showed good accuracy when compared with tests available in the literature.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.107-111
• /
• 1999

A high-temperature superconducting 1.78 GHz bandpass filter, designed for PCS applications, is presented. The structure consists of microstrip pseudo-lumped elements, which make the miniaturization of the filter possible. A 5-pole microstrip filter can be realized on 37 mm ${\times}$ 9 mm LaAlO$_3$ substrate, using double-sided high-temperature superconducting YBa$_2Cu_3O_{7-{\delta}}$ thin film. This filter shows 0.7% fractional bandwidth, 0.3 dB insertion loss, and 12 dB return loss in the passband at 60 K.