• Journal of Information Display
• /
• 제11권2호
• /
• pp.39-44
• /
• 2010

The time dependences of the luminance properties of 55-inch CCFL and LED backlights and 32-inch FFL backlights with LCD panels were investigated during the warm-up time from the cold start. The long-term luminance maintenance curve of a standard CCFL was examined in a time window up to 5000 hours. These two time dependences are important characteristics from the viewpoint of initial picture quality and lifetime reliability, respectively. Empirical equations were suggested for the analysis of the time dependence of these luminance data. These approaches are expected to be helpful in predicting the luminance properties of backlights based on the luminance data obtained in a limited time window.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1185-1188
• /
• 2007

The address discharge characteristics by the various scan-low and common-bias voltages are investigated based on measured address discharge time lags and $V_t$ close-curve analysis. The scan-low voltages are changed under the same voltage difference between the X and Y electrodes during an address period. As the voltage difference between the scan and address electrodes is increased during an address period, the address discharge time lag is shortened but the background luminance is increased. It is found that the improved address discharge characteristics is caused by the effect of the higher external applied voltage during an address period than the accumulated wall charges during a reset period and the high background luminance can be prevented by applying an address-bias voltage during a rising-ramp period and low reset voltage.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.92-97
• /
• 2015

The purpose of this work is to support a solution of optimizing TMO (tone mapping operator). JPEG XT Profile A and C utilize Erik Reinhard TMO that works well in most cases, however, detailed information of a scene is lost in some cases. Reinhard TMO only calculates its coefficient to have tone-mapping curve from log-average luminance, and this lead to lose details of bright and dark area of scenes in turn. Thus, this paper proposes an enhancement of the default TMO for JPEG XT Profile C to optimize tone-mapping curve. Main idea is that we divide tone mapping curve into several ranges, and set reasonable parameters for each range. By the experimental results, the proposed scheme shows and obtains better performance within a dark scene, compared to the default Reinhard TMO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1266-1268
• /
• 2005

The influence of the grooved dielectric layer on discharge and luminous characteristics has been investigated for various depths of the groove to achieve a high luminance efficiency AC-PDP operated at a lower voltage. We use the voltagethreshold curve technique and address delay jitters to explain the discharge characteristics. It shows that the surface discharge voltage rely on the depth of the grooved dielectric layer. Vertical discharge voltage remains almost the same as the groove depth increases. The influence of the grooved dielectric layer on discharge and luminous characteristics has been investigated for various depths of the groove to achieve a high luminance efficiency AC-PDP operated at a lower voltage. We use the voltagethreshold curve technique and address delay jitters to explain the discharge characteristics. It shows that the surface discharge voltage rely on the depth of the grooved dielectric layer. Vertical discharge voltage remains almost the same as the groove depth increases.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.507-515
• /
• 2009

In this paper, we propose an image signal processor (ISP) for an ultra small HD-grade video sensor with 3A (AWB, AE, and AF) in camera phones that can process 720P/30fps videos. In order to enhance the video quality of the systems, it is necessary to achieve the high performance of the 3A. The proposed AWB algorithm multiplies the adjusted coefficients of color gains to the captured data of white objects. The proposed AE method adopts the index step moving based on the difference between an averaged Y luminance and a target luminance, together with IIR filters with variable time responses. The proposed AF technique controls the focus curve to find the lens position that maximizes the integrated high frequency components in luminance values by using highpass filters. Finally, we compare the image quality captured from our system to the quality of a commercial HD camcorder in order to evaluate the performance of the proposed ISP. The proposed ISP system is also fabricated with 0.18um CMOS flash memory process.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.564-568
• /
• 1999

The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.777-782
• /
• 2009

In this paper, the effect of the secondary electron emission coefficient of Xe ion on glow discharge was examined by ID numerical simulation. The simulation was performed for two distinct structures, short and long gaps. The features of the glow discharges in the both structures, firing and sustain voltages, luminance, and efficiency, were analyzed at various secondary electron emission coefficient of Xe ion.

• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.31-38
• /
• 2005

본 논문에서는 동일 광원에서 휘도 변화에 따른 색 순응 현상을 고려하여 원 피사체와 동일하게 보이는 대응색을 재현할 수 있는 색 순응 모델을 제안한다. 제안한 CAM$\Delta$Y는 저휘도 상태의 시험 색과 동일하게 보이는 고휘도의 상태의 대응색으로 변환하는 변환 행렬로 모델링하고, 제안 모델의 최적 계수 값들은 Breneman이 실험한 주위 휘도별 대응색 데이터들로부터 구한다. 제안한 색 순응 모델인 CAM$\Delta$Y에 의한 예측 대응색과 Breneman의 실험 데이터 간의 측색적 좌표 오차 $\Delta$u'v'를 비교해 본 결과, Breneman의 D55 광원의 세 가지 서로 다른 밝기에 대한 실험의 대응색과 제안한 모델에 의해 예측된 색과의 평균 측색적 좌표 에러 $\Delta$u'w'의 값이 0.004 정도로, 이는 제안 모델의 평균 측색적 좌표 오차가 인접한 (adjacent) 두 컬러 샘플간의 구별 색차 정도로 아주 작은 오차를 가짐으로 그 성능이 매우 좋음을 확인하였다. 또한 제안한 CAM$\Delta$Y를 이용하여 동일 광원의 밝기에 따른 동일한 백색으로 보이는 등백색 상관 색온도 곡선 (equal-whiteness CCT curve, EWC)을 제안한다. 제안한 둥백색 상관 색온도 곡선은 이제까지 TV 제조 업자들의 경험에 의해 결정된 디스플레이 장치의 기준 백색을 설정하는 정량적인 기준으로 사용될 수 있다

• 전기화학회지
• /
• 제3권1호
• /
• pp.1-4
• /
• 2000

Zinc chloride$(ZnCl_2)$를 출발물질로 하여 Bis(8-oxyquinolino) zinc II(Znq2)를 합성하였다. N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)를 전공운송층으로 도입하고, Znq2를 전자운송층 및 발광층으로 이용하여 유기 EL소자를 제작하였다. ELD의 발광을 최대화하기 위해 EL 발광층의 두께를 변화시켜 ITO(투명전극)/TPD(전공운송층)/znq2(발광층 및 전자운송층)/Al(배면전극) 순으로 제작하였다. PL 스펙트림으로 Znq2 화합물이 540 nm에서의 노란-녹색의 빛을 발하는 물질임을 알 수 있었다. 전압전류밀도와 전압-휘도의 전기적인 거동이 문턱전압 6 V에서 나타났고, 최대 휘도와 효율은 약 $838 cd/m^2$로 측정되었다. 이 결과로써, 합성된 Znq2가 유기 EL디스플레이용 재료 물질로써 이용 가능성 있는 물질임을 밝힌다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권2호
• /
• pp.70-77
• /
• 2017

Where there are all the flowers, the songs of all kinds of insects and birds are put in, the sunshine and shadows flicker The forest through which the water sound flows is an optimum resting space. All living creatures in these spaces will awaken the five senses of humans and perhaps turn the sensibility index (EQ). The forest meditation in the forest, which can be an optimal shelter for the people who need it, needs to feel the reverence of nature, to refine emotions, to be a self-reflection, to have a mind to respect, Have an important meaning. In this paper, we tried to consider the cause of the influence of forest sounds on human hearing from the acoustical aspect. The type of sound source of forest was divided into four seasons of spring, summer, autumn, winter. And the change in the duration of the sound during the four seasons, so that the general characteristics of the sounds of the four seasons are as follows: It can be seen that the change in the ratio of sub-band energy is almost equal to the change in dB in frequency of the equal-light curve. To compare this phenomenon, the criterion for changing the sound duration of each forest is natural The main forms of the luminance curve, such as the change in the duration of the white signal in the sound, are determined by the minimum, maximum audible frequency and the most sensitive frequency band, and the auditory characteristics of the other three inflection points Determines the overall shape of the equal-light curve.