• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.172-178
• /
• 2011

Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.239-243
• /
• 2011

In this study, the coating properties and surface performance of exotic cherry wood (Prunus serotina) were estimated, reviewing color difference, hardness and abrasion resistibility in order to evaluate probability as construction interior members such as wall and floor. The reduction effect of color difference was represented in the order of water soluble color stain, water soluble transparent stain, and non-coated lumber. However, the tendency of distinct difference according to wood grain pattern was not found. The wavy grain lumber showed better properties in hardness and resistance to abrasion than quarter grain. In conclusion, it was supposed that the application of wavy grain lumber in wall and floor as interior materials would be acceptable in practicality.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.197-202
• /
• 2007

This study is conducted to investigate the factors affecting lumber conversion rate of sawmill industry in South Korea. Data were obtained from the survey of 38 sawmills in all geographic regions of South Korea. The variables examined in this study were region, softwood/hardwood log, domestic/imported/both log, the number of power-driven carriages (PDC) installed, the year when and country where PDCs was manufactured, the horse power of PDC, the number of labors required to operate each PDC, the sawing capacity of mill (mill size), and the types of major product and by-products. The lumber recovery factor (LRF) of sawmills were significantly influenced by the origin of logs, level of PDC automation, sawmill size, and size of logs (measured in diameter and length) while not by the location of the mill, types of major product and by-product, log species, and characteristics of PDC. Although these results provide useful information for understanding the technological characteristics of the Korean sawmill industry, further investigation with larger sample is necessary to reveal the more reliable characteristics of sawmill industry in South Korea.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.17 no.3
• /
• pp.253-262
• /
• 2013

Objectives This study is on the quantifying method for the acupuncture-moxa cautery heat response index, which are based on the some definitions. Methods The magnitude of the acupuncture-moxa cautery is defined by the pain-feeling of the acupuncture-moxa cautery stimulation: the stimulation magnitude of the acupuncture is 1, that of the direct moxa-cautery is 2, and that of the indirect moxa-cautery is 0.5. The heat variation of the acupuncture-moxa cautery stimulation is defined by the heat variations of the characteristic points pre/post-stimulations in the stenosis of the lumber. The acupuncture-moxa cautery heat response index is defined by the ratio of between the magnitude of the heat variation and the natural logarithmic magnitude of the stimulation. Results With the respect of the acupuncture-moxa cautery heat response index, I experimented and estimated 4 types of stimulations in the stenosis of the lumber: the single acupuncture stimulation with 40%, the single direct moxa-cautery stimulation with 52%, the combinational acupuncture-moxa cautery stimulations with 27%, and the combinational acupuncture-indirect electronic moxa-cautery stimulations with 53%. Conclusions According to the acupuncture-moxa cautery heat response index. the combinational acupuncture-moxa cautery stimulations especially need to be changed to the combinational acupuncture-indirect electronic moxa-cautery stimulations.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.73-80
• /
• 2001

This study was carried out to investigate the strength and technical feasibility of arch type laminated lumber from the domestic small lumbers(Pinus densiflora S. et Z. and Larix kampferi Catt.). Arch type lumbers manufactured with different compositions of laminae. It was designed to improve the strength and stiffness. Strength S. rt Z. U;timate load Carr. laminated lumbers were higher than that of the Pinus densiflora S. et Z. Ultimate load of 7-ply laminated lumbers were 2 times higher than the 5-ply laminated lumbers. The strength of finger jointed lumbers were found to be about 15.8% less than that of the no joint lumber. One solution for this problem is to use veneer as face lamina. The veneer laminated lumbers was considerably greater than that of the non-veneer laminated lumbers. It was suggested that this small lumber may be a candidate for high valued product member to provide the proper combination of laminae.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.93-99
• /
• 2018

It is necessary to review the non-destructive indexes in order to estimate the bending strength performance of the domestic larch lumber. In this study, MOEs (modulus of elastic) the larch lumber (cross-section $89{\times}120mm$) were evaluated through non-destructive methods such as the ultra-sonic method, longitudinal vibration method, and non-destructive bending method. The non-destructive measurement method which best represented the static MOE was determined and applied as the MOR(modulus of rupture) estimation index. The MOE that was measured through the longitudinal vibration method showed the highest correlation with the static MOE. The MOR was highly related to the static MOE. Therefore, the non-destruction MOE measured through the longitudinal vibration method was used to estimate the MOR of the lumber.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.49-54
• /
• 2006

This study was carried out to provide basic data for using domestic structural softwood lumber efficiently and ensuring structural safety of timber structures. The ratios (k-factor) between static and dynamic MOE measured by ultrasonic device for $2{\times}6$ domestic softwood structural lumber are 1.0602 for Korean red pine, 1.0013 for Korean white pine and 1.2320 for Japanese larch. In machine grade using nondestructive method, 76% of Korean red pine was classified into higher than E9 grade, 85% of Korean white pine was sorted into higher than E7 grade and 68% of Japanese larch was classified into higher than E11 grade. Correlation between MOE and MOR by static bending with k-factor from nondestructive method provide a possibility to predict bending strength and allowable stress of domestic softwood structural lumber.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.879-880
• /
• 2008

Music can give pleasure to people according to a rhythm, and Musical instrument can make various sounds according to quality of the lumber. A string instrument makes sound by strings so it feels very soft and a brass makes to feel a high pitched tone. A gayageum makes sound by oscillation which is transferred to a resonator when a string is touched. And this sound is very soft and faint. Therefore, in this paper, we researched sound properties of gayageum according to quality of the lumber of musical instrument. As the result of researches, we found that melody is affected by the annual ring of the resonance lumber.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.381-389
• /
• 2011

The effect of organoclays on the mechanical properties of cured phenol formaldehyde resin and oriented strand lumber made from Mountain Pine Beetle killed pine strands was analyzed. Three organoclays were used: a natural montmorillonite, hydrophobic organically modified 10 A, and hydrophilic organically modified 30 B. The oriented strand lumber samples were less creep deformation as well as improved internal bonding strength by adding organoclays in the order of 10 A 2% > MMT 2% > 30 B 2% > control. Furthermore, time-temperature superposition (TTS) analysis was proved to be able to predict the long-term creep behavior of MPB-OSL samples.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.50-55
• /
• 1999

Since ultrasonic stress wave velocity varies with wood temperature and moisture content, ultrasonic stress wave could be a tool to predict wood moisture content if temperature effect could be eliminated. This temperature effect was investigated by measuring the velocities of ultrasonic stress waves transmitting through air, a metal bar and a dimension lumber at various temperatures. For air the velocity and amplitude of the ultrasonic stress wave increase with temperature, while for a metal bar and a dimension lumber those decrease as temperature increases. However all three materials showed velocity hystereses with a temperature cycle. The effect of temperature and moisture content on stress wave velocity of a dimension lumber was depicted in the form of a three dimensional graph. The plot of stress wave velocity vs. wood moisture content was well fitted by two regression equations: a exponential equation below 46% and a linear equation above 46%.