• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.186-192
• /
• 2010

An infrared heating system, installed in a small venlo-type glasshouse ($280m^2$) in Gyeongsang National University, Jinju, Korea, was used to investigate its heating effect with potted Phalaenopsis, Schefflera arboricola 'Hongkong', Ficus elastica 'Variegata', and Rosa hybrida 'Yellow King' as the test plants. Temperature changes in test plants with the system turned 'On' and 'Off' were measured by using an infrared camera and the consumption of electricity by this infrared heating system was measured and analyzed. In potted Phalaenopsis, when the set air temperature of the greenhouse was $18^{\circ}C$, temperature of leaves and the growing medium were $22.8{\sim}27^{\circ}C$ and $21.3{\sim}24.3^{\circ}C$, respectively. In such tall plants as Schefflera arboricola 'Hongkong' and Ficus elastica 'Variegata', the upper part showed the highest temperature of 24.0 and $26.9^{\circ}C$, respectively. From the results of temperature change measurements, the plant temperatures were near or above the set point temperatures with some fluctuations depending on the position or distance from the infrared heating system. When air temperature between night and dawn dropped sharply, plant temperatures were maintained close to the set temperature ($18^{\circ}C$). There was a significant difference between 'On' and 'Off' states of the infrared heating system in average temperatures of root zone and leaf: 21.8 and $17.8^{\circ}C$ with the system 'On' and 20.4 and $15.5^{\circ}C$ with the system 'Off', respectively, in a cut rose Rosa hybrida 'Yellow King'. The heating load was about $24,850{\sim}35,830kcal{\cdot}h^{-1}$, which comes to about 27,000~40,000 won in Korean currency when calculated in terms of the cost of heating by a hot water heating system heated by petroleum. The cost for heating by the infrared heating system was about 35% of that of a hot water heating system. With the infrared heating system, the air temperature during the night was maintained slightly lower than the set point air temperature, probably due to the lack of air tightness of the glasshouse. Therefore, glasshouses with an infrared heating system requires further investigation including the installation space of the heat-emitting units, temperature sensor positions, and convection.

• Journal of Korean Society of Forest Science
• /
• v.82 no.2
• /
• pp.188-194
• /
• 1993

A natural Quercus variabilis forest and a Populus alba${\times}$P. glandulosa plantation in Mt. Mohu area were studied to investigate aboveground biomass and net production. A $20m{\times}30m$ quadrat was set up in each stand, and 10 sample trees each of Quercus variabilis and Populus alba ${\times}$ P. glandulosa were cut for dimension analysis. There was little difference in accuracy among three biomass regression models of logWt=A+BlogD, $logWt=A+BlogD^2H$, and logWt=A+BlogD+ClogH, where Wt. D, and H were dry weight, DBH, and height, respectively. Aboveground total biomass of Quercus variabilis stand was 31,275kg/ha, and that of Populus alba ${\times}$ P. glandulosa was 55,581kg/ha. In both of Quercus variabilis stand and Populus alba ${\times}$ P. glandulosa stand, the proportion of each tree component to abovegound total biomass was high in order of stem wood, branches, stem bark, and leaves. Quercus variabilis stand was higher in the proportion of stem bark, branches and leaves than Populus alba ${\times}$ P. glandulosa stand, while the former was lower in that of stem wood than the latter. Aboveground total net production of Quercus variabilis stand was 4,267kg/ha/yr., and that of Populus alba ${\times}$ P. glandulosa stand was 3,903kg/ha/yr. The proportion of each tree component to aboveground total net production of Quercus variabilis stand was high in order of leaves, stem wood, branches, and stem bark. That of Populus alba ${\times}$ P. glandulosa stand was high in order of stem wood, leaves, branches, and stem bark. Net assimilation rate and efficiency of leaf to produce stem of Quercus variabilis stand were 2.121 and 0.840, respectively. Those of Populus alba ${\times}$ P. glandulosa stand were 3.376 and 2.085, respectively. Though Populus alba${\times}$P. glandulosa stand was lower in aboveground total net production than Quercus variabilis stand, the former was higher in aboveground total biomass than the latter. The reason was that Populus alba${\times}$P. glandulosa stand was higher in net production of stem wood of accumulation organs than Quercus variablis stand.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.6
• /
• pp.600-610
• /
• 2004

Background : The plasma B-type natriuretic peptide(BNP) concentration increases with the degree of pulmonary hypertension in patients with chronic respiratory disease. The aim of this study was to examine the prognostic role of BNP in the acute exacerbation of chronic obstructive lung disease (COPD). Method : We selected 67 patients who were admitted our hospital because of an acute exacerbation of COPD. Their BNP levels were checked on admission at the Emergency Department. Their medical records were analyzed retrospectively. The patients were divided into two groups according to their in-hospital mortality. The patients' medical history, comobidity, exacerbation type, blood gas analysis, pulmonary function, APACHE II severity score and plasma BNP level were compared. Results : Multiple logistic regression analysis identified three independent predictors of mortality: $FEV_1$, APACHE II score and plasma BNP level. The decedents group showed a lower $FEV_1$($28{\pm}7$ vs. $37{\pm}15%$, p=0.005), a higher APACHE II score($22.4{\pm}6.1$ vs. $15.8{\pm}4.7$, p=0.000) and a higher BNP level ($201{\pm}116$ vs. $77{\pm}80pg/mL$, p=0.000) than the sSurvivors group. When the BNP cut-off level was set to 88pg/mL using the receiver operating characteristic curve, the sensitivity was 90% and the specificity was 75% in differentiating between the survivors and decedents. On Fisher's exact test, the odds ratio for mortality was 21.2 (95% CI 2.49 to 180.4) in the patients with a BNP level > 88pg/mL. Conclusion : The plasma BNP level might be a predictor of mortality in an acute exacerbation of COPD as well as the $FEV_1$ and APACHE II score.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.651-655
• /
• 2005

Background : Diagnosing a pulmonary embolism is difficult because its presenting symptoms are nonspecific and there are limitations with all of the objective tests. The D-dimer is known to be a marker of the lysis of intravascular cross-linked fibrin as a result of the activation of the endogenous fibrinolytic pathways, and the D-dimer assay is these an objective method for diagnosing a pulmonary embolism. This study assessed the benefits of the D-dimer test for diagnosing a pulmonary embolism using semiquantitative latex agglutination. Methods : The latex agglutination results of 185 patients were retrospectively reviewed. The D-dimer test was performed at the time a pulmonary embolism was suspected. Ninety patients(group I) were diagnosis with PE through spiral chest CT or a chest CT angiogram, perfusion/ventilation scans, and/or pulmonary angiogram. Ninety-five patients (group II) were found not to have a pulmonary embolism through the above tests. Results : The male to female ratio and mean age in groups I and II was 37:55, and 57 years old to 50:45 and 52 years old, respectively. When the cut off value for a positive D-dimer assay was set to $500{\mu}g$, the sensitivity, positive predictive value, negative predictive value and specificity was 86.7%, 61.4%, 79.3%, and 48.4%, respectively. Conclusion : The semiquantitative latex agglutination method in the D-dimer test has a lower sensitivity and negative predictive value than the well known ELISA test particularly for small emboli. Therefore, this test is not a suitable screening test for excluding a pulmonary embolism.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.1
• /
• pp.45-52
• /
• 2019

This experiment was carried out to study the change of productivity and feed value in different types of hilly pasture. The pasture utilized in the experiment was placed on the experimental farm of Pyeongchang Campus of Seoul National University. Forage production type(FP; Orchardgrass 18 + Tall Fescue 12 + Timothy 5 + White clover 5 kg/ha) and Public farm type(PF: Orchardgrass 12 + Tall Fescue 18 + Timothy 5 + White clover 5 kg/ha) pasture were established in September 3, 2014 and utilized (cutting or grazing) four times every year. Growth characteristics, yield and forage quality were investigated for two years. Plant height of grasses was the highest in the $1^{st}$ cutting and legumes was in the $2^{nd}$ cutting. Dry matter (DM) content was highest at every the $1^{st}$ cut grasses significantly lower at the $2^{nd}$ harvest (p<0.05). However, there was no significant difference in the $2^{nd}$, $3^{rd}$ and $4^{th}$ harvest in 2016. In the botanical composition change, the portion of legume was gradually increased after pasture establishment and the ratio of weed and bare land was higher at $2^{nd}$ and $3^{rd}$ cutting, but it was decreased at $4^{th}$ harvest. There was no significant difference in 2016 of fresh yield between two farm types (p>0.05). The yield of dry matter showed similar trend of fresh yield and forage production type was higher than that of public farm type (p<0.05). The forage intake by livestock was 1,452 kg/ha in 2015 and 1,743 kg/ha in 2016. Pasture utilization ratio of public farm type pasture was highest in the $3^{rd}$ grazing time. Forage quality of pasture in relation to management type had not significant difference, but there was difference in harvest times. Crude protein (CP) was the lowest in the $1^{st}$ harvest and total digestible nutrient (TDN) was highest in the $1^{st}$ harvest and lowest in the $4^{th}$ harvest. Based on the above results, it is found that the establishment of pasture suitable for farm's situation is important for set up of Korean model of hilly pasture. Although the forage production type is superior on forage productivity, it is recommended that the results will be provided as basic data for management of public farm type in the future.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.4
• /
• pp.109-116
• /
• 2024

β-Ga₂O₃ is a representative ultra-wide bandgap (UWBG) semiconductor that has attracted much attention for power device applications due to its wide-bandgap of 4.9 eV and high-breakdown voltage of 8 MV/cm. In addition, because solution growth is possible, it has advantages such as fast growth rate and lower production cost compared to SiC and GaN [1-2]. In this study, we have successfully grown Si-doped 10 mm thick Si-doped β-Ga₂O₃ single crystals by the EFG (Edge-defined Film-fed Growth) method. The growth direction and growth principal plane were set to [010] / (010), respectively, and the growth speed was 7~20 mm/h. The as-grown β-Ga₂O₃ single crystal was cut into various crystal planes (001, 100, ${\bar{2}}01$) and off-angles (1^o, 3^o, 4^o), and then surface processed. After processed, the homoepitaxial layer was grown on the epi-ready substrate using the HVPE (Halide vapor phase epitaxy) method. The processed samples and the epi-layer grown samples were analyzed by XRD, AFM, OM, and Etching to compare the surface properties according to the crystal plane and off-angle.