• Journal of Advanced Marine Engineering and Technology
• /
• 제27권7호
• /
• pp.872-878
• /
• 2003

As the results of recent industrial development, many industrial plants and marine structures are exposed to severe corrosion environment than before. Especially, under the wet environment, crevice corrosion damage problems necessarily occur and encourage many interests to prevent them. In this study, the electrochemical polarization test was carried out to study characteristics of crevice corrosion for AISI 304 stainless steel in various solution temperatures. The results are as follows ; 1) as the solution temperature increased in IN $\textrm{H}_2\textrm{SO}_4$, the passive current density and critical current density were increased, whereas corrosion potential and break down potential were nearly constant, 2) as the solution temperature increased. the induced time for initiation of crevice corrosion was shortened. 3) The potential range in the crevice was -220mV/SCE to -380mV/SCE according to the distance from the crevice opening, which is lower than that of external surface of -200mV/SCE.

• 폴리머
• /
• 제24권6호
• /
• pp.854-859
• /
• 2000

N,N-dimethylamino ethyl methacrylate(DMAEMA)와 poly(ethylene glycol) (PEG)로 이루어진 블록 공중합체를 합성하였고, 그 구조를 FT-IR, DSC, 및 $^1$H-NMR로 확인하였다. 준비된 poly(DMAEMA))-PEG 블록 공중합체 수용액에 poly(ethyl acrylamide)(PEAAm)를 첨가하면 블록 공중합체의 DMAEMA와 poly(EAAm) 사이에서 일어나는 수소결합에 의해 나노복합체가 형성되었다. 나노복합체는 임계미셀농도 이상의 농도에서 이루어졌다.

• KSBB Journal
• /
• 제15권6호
• /
• pp.548-555
• /
• 2000

온도 및 pH에 동시에 민감한 하이드로젤 poly(N-isopropy­l lacrylamide-co-N,N-dimethylaminopropy Imethacrylamide)을 온도 (13, 15.5, 18, 20.5 및 $23^{\circ}C$)와 pH (10.3, 11.3 및 12.3)를 달리 하여 합성하고 이 젤들의 외형, 기계적 강도, 젤 표면모양, LCST, 수축 pH 및 젤의 팽윤 특성을 연구하였다. 합성온도 및 합성 pH가 낮을수록 젤의 외형은 투명하였 고 기계적 강도는 높았다. SEM 관찰 결과 단백질 보다 더 큰 pore들 때문에 분리효율이 감소되는 것으로 사료된다. 합 성온도나 합성 pH의 증가는 LCST를 낮추었다. 외부온도가 LCST보다 낮은 $25^{\circ}C$ 에 서는 모든 합성온도와 합성 pH에 대 하여 젤은 전 pH에 걸쳐 팽윤된 상태에 있었다. $40^{\circ}C$에서는 LCST보다 높은 온도임에도 불구하고 poly (NIPAAm-co­D DMAPMAAm) 하이드로젤은 pH가 중성 및 산성 영역에서 팽윤되었다. 합성온도가 증가함에 따라 젤 부피가 가장 큰 폭으로 변하는 수축 pH가 더 높아졌다.

• Macromolecular Research
• /
• 제8권1호
• /
• pp.26-33
• /
• 2000

A series of pH/temperature sensitive polymers were synthesized by copolymerizing N-isopro-pyl acrylamide(NIPAAm) and acrylic acid(AAc) . The influence of polyelectrolyte between poly(allyl amine) (PAA) and poly(L-lysine)(PLL) on the lower critical solution temperature(LCST) of pH/temperature sensitive polymer was compared in the range of pH 2∼12. The LCST of PNIPAAm/water in aqueous poly(NIPAAm-co-AAc) solution was determined by cloud point measurements. A polyelectrolyte complex was prepared by mixing poly(NIPAAm-co-AAc) with poly(allyl amine) (PAA) or poly(L-lysine) (PLL) solutions as anionic and cationic polyelectrolytes, respectively. The effect of polyelectrolyte complex formation on the conformation of PLL was studied as a function of temperature by means of circular dichroism(CD). The cloud points of PNIPAAm in the aqueous copolymers solutions were stongly affected by pH, the presence of polyelectrolyte solute, AAc content, and charge density. The polyelectrolyte complex was formed at neutral condition. The influence of more hydrophobic PLL as a polyelectrolyte on the cloud point of PNIPAAm in the aqueous copolymer solution was stronger than that of poly(allyl amine)(PAA). Although polymer-polymer complex was formed between poly(NIPAAm-co-AAc) and PLL, the conformational change of PLL did not occur due to steric hinderance of bulky N-isopropyl groups of PNIPAAm.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권1호
• /
• pp.15-22
• /
• 2015

Poly(ethylene glycol) end-capped with pentafluorophenyl group(s) in ABA (FP-PEG-FP) and AB (mPEG-FP) types were prepared. Even though they were similar in composition, the lower critical solution temperature (LCST) of FP-PEG-FP was observed at $23^{\circ}C$, whereas that of mPEG-FP was observed at $65^{\circ}C$. To understand the large difference in solution behaviour of the two polymers, UV-VIS spectroscopy, microcalorimetry, 1H-NMR spectroscopy, and dynamic light scattering were used. FP-PEG-FP has two hydrophobic pentafluorophenyl groups at the ends of hydrophilic PEG (1000 Daltons), whereas mPEG-PF has a highly dynamic PEG (550 Daltons) block that are anchored to a hydrophobic pentafluorophenyl group. PF-PEG-PF not only has a smaller conformational degree of freedom than mPEG-PF but also can form extensive intermolecular aggregates, therefore, PF-PEG-PF exhibits a significantly lower LCST than mPEG-PF. This paper suggests that topological control is very important in designing a temperature-sensitive polymer.

• 대한화학회지
• /
• 제47권1호
• /
• pp.59-66
• /
• 2003

생물학적 의약품, 식품 등과 같이 저온 유통 체계(cold chain)를 관리하는데 있어서 제품 용기에 부착하여 보관 온도 이상에 노출될 경우 비가역적인 변화를 일으켜 고온 노출여부를 검지 할 수 있는 라벨의 소재로소 poly(N-isopropylacrylamide-co-t-butylacrylamide) [p(NIPAAm-co-t-BAM)]수화겔의 적용 가능성을 평가하였다. p(NIPAAm-co-t-BAM)수화겔은 cold chain 온도인 8$^{\circ}$C 이하에서 온도 민감성을 갖도록 t-BAM양을 조절하여 레독스 중합반응을 통하여 저온 (4$^{\circ}$C)합성하였고, 또한 oli해(NIPAAm-co-t-BAM) 공중합체를 그라프트하여 빗살 구조를 가지는 가교수화겔을 제조함으로써 수화겔의 수축 팽윤 속도를 향상시키고자 하였다. 합성 된 수화겔의 lower critical solution temperatures(LCSTs)는 흐림 점 측정법과 시차주사열량계(DSC)를 이용하여 측정하였으며, NIPAAm 단량체와 빗살형태의 t-BAM 공중합체의 조성비가 가교제의 양에 따라 수화겔의 수축과 팽윤 거동을 관찰하였다. 소수성기를 포함하는 t-BAM의 조성비율에 따라 8$^{\circ}$C 이하 저온에서 수화겔의 LCST조절이 가능하며, 빗살 형태로 그라프트된 공중합체의 조성비에 따라 수축-팽윤율 및 속도의 조절이 가능한 것으로 확인되었다.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.635-643
• /
• 2009

The resistance to pitting corrosion of Fe-Cr alloys was evaluated by performing potentiodynamic polarization and critical pitting temperature (CPT) tests. For the potentiodynamic polarization tests, various standards were applied, i.e., KS D 0238 (wet, dry), ASTM G 61, and ISO 17475, showing different potentiodynamic polarization results including pitting potentials. ASTM G 61 and ISO 17475 standards presented relatively higher pitting potential while KS D 0238 (dry) indicated lower values than the others. Effects of surface roughness, scan rates, and exposure time to air before tests were also investigated. CPT tests were performed under two different applied potentials, 300 m$V_{SCE}$ and 200 m$V_{SCE}$ in deaerated 1 M NaCl aqueous solution. CPT values and the polarization test results showed a linear relationship.

• 한국식품영양학회지
• /
• 제22권3호
• /
• pp.377-386
• /
• 2009

The principal objective of this study was to evaluate the influence of temperature and salt concentration on the physicochemical properties of salted Chinese cabbage. Salted Chinese cabbage samples were prepared with various concentrations of salt(4, 5, 6 and 7%), and were stored for 10 days at three temperatures(8, 14, and $25^{\circ}C$). The salting ratio of Chinese cabbage evidenced a decreasing trend regardless of the salting temperature and salt concentration, and their decrement appeared relatively high as the salting temperature increased. The period required to achieve a critical salting ratio(85%) decreased with increases in the salt concentration at $25^{\circ}C$, and a similar trend was observed at lower temperatures(8 and $14^{\circ}C$). The salinity of all samples evidenced an increasing trend during the salting period, and at $25^{\circ}C$, in particular, a continuous increment was observed. At salt concentrations of 4%, the critical salinity(2.2%) was not achieved regardless of the temperature and salting period. The pH of salted Chinese cabbage achieved critical pH in 3 days at a salting temperature of $25^{\circ}C$, but the critical pH 5.5 of samples at 8 and $14^{\circ}C$ appeared after a long period of approximately 4 to 10 days. The average hardness values of salted Chinese cabbage at a salting ratio of 85% were approximately 1.49 MPa, 1.87 MPa, and 1.97 MPa, respectively, at three temperatures($25^{\circ}C$, $14^{\circ}C$, and $8^{\circ}C$). The initial reducing sugar content of cabbage juice was 11.8 mg/$m{\ell}$, and this value decreased substantially to 3 to 5 mg/$m{\ell}$ on day 1.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 춘계 총회 및 학술발표회
• /
• pp.50-51
• /
• 1995

The swelling behavior of hyddrogels has been interested in many applications of drug carriers. These gels show reversible swelling changes in response to pH, electric currcnt, and temperature. Among others, the temperature-responsive behavior of poly(N-isopropylacrylanxide) (p(NIPAAm)) was studied, because a lower critical solution temperature(LCST) is in the vicinity of 32$\circ$C, and remarkable temperature-response can be obtained. We propose a novel composite membrane, which is appropriate for transporting drug ingredients above the transition temperature. Our object was to design a high permeation system above the shrinking temperature of p(NIPAAm). The membrane was composed of a matrix polymer and thermosensitive p(NIPAAm) hydrogel. The flux pattern of 4-acctamidophen through membrane in response of temperature was opposite to that of p(NIPAAm) membrane.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1981-1984
• /
• 2006

Novel amphiphilic, thermo-responsive polyaspartamides which showed both LCST (lower critical solution temperature), and sol-gel transition were prepared and characterized. The polyaspartamide derivatives were synthesized from polysuccinimide, the polycondensate of aspartic acid monomer, via successive nucleophilic ring-opening reaction by using dodecylamine and N-isopropylethylenediamine (NIPEDA). At the intermediate composition ranges, the dilute aqueous solution exhibited a thermally responsive phase separation due to the presence of LCST. The phase transition temperature was controllable by changing the content of pendent groups. In addition, a physical gelation, i.e. the sol-gel transition was observed from the concentrated solutions, which was elucidated by dynamic viscoelastic measurements. These novel injectable and thermo-responsive hydrogels have potential for various biomedical applications such as tissue engineering and current drug delivery system.