• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.27-32
• /
• 2022

There has always been a demand for orthodontic treatment. Orthodontic treatment allows tooth to be arranged by flexible arch wire fixed with tooth-attached brackets. Arch wire generate constant pressure to tooth brackets which moves the teeth to proper place. When the bracket transmits force, the braced wing of the bracket may deform. Deformed tie wing will lead to lost tension of elastic ligature. Then, lacking grip between tie wing and ligature might delay the tooth movement. Furthermore, tooth brackets used for orthodontic treatment make contact with in direct oral surface and this cause feeling of irritation that comes from height of tooth braces. This study suggests an optimal teethe bracket design to make up for inconvenience by shorten the height of bracket and complement the shape of bracket to reduce strain rate using finite element analysis. As a result, new optimal design of teethe bracket indicates lower strain rate of the bracket wing and takes good effects of shorten body height in terms of convenience.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.1
• /
• pp.101-142
• /
• 1998

1. Objects The base of classification of Sasang Constitution was the different congenital formation of organs such as lungs, spleen, liver, kidneys, and it was expanded from the viscera region of lungs, spleen, liver, kidneys to the body shape of trunk. The researched about body shape of Sasang Constitution have had points of issues which derived by measurement with hands. But this study was measured the characteristics of body shape putting in importance of anatomical position with the computerized 3-Dimension scanner, which minimized the errors of measurement, and it was abled the cubic measurement such as volume, area of cross section as well as round length. 2. Materials & Method The examinee was healthy male 40 persons and female 20 persons from 20's to 40's, who was diagnosed by the specialist of Sasang Constitutional Medicine. The body shape was measured round length, area of cross section, and volume of 31 anatomical points and the 25 hypothesis with the Rapid 3D Color Scanner Model 3030 RGB/PS. And the characteristics of each constitution's body shape was derived. 3. Results & Concousion In female, Taeumin had the largest trunk and Soeumin had the smallest trunk compared to other constitution, but Soyangin had only the smallest neck. Soeumin has the smallest round length of nipple and the $CV_{12}$, and Soyangin has the smallest breadth of ASIS. Soyangin had the smallest volume from thyroid bone to the highest points of armpits and from sternum to nipple. Taeumin had the largest volume from sternum to the $CV_{12}$ and from sternum to xiphoid process. In male, Taeumin had the largest trunk and Soeumin had the smallest trunk from the level of thyroid bone to ASIS. Soyangin has the longest distance and Soeumin has the shortest distance from nipple to the lowest of breast. Taeumin had the largest volume of trunk and Soeumin had the smallest volume of trunk. In the ration of four-Cho, Taeumin had the longest distance from the highest points of armpits to nipple and Soyangin had the shortest distance of that. Soyangin had the smallest ratio of the height of upper middle cho. Soeumin had the smallest ratio from the $CV_{12}$ to navel among trunk. In the correlation among the four Cho, Taeumin had the negative correlation between the Upper-Cho and the Lower-Middle-Cho significantly.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.42-51
• /
• 2009

As wine culture becomes popular among the people in modem society, the consumption of wine has increased due to the need to enjoy wine at home. Nonetheless, the development of wine cabinet has not made much progress. In order to compensate such matter, a wine cabinet that satisfies the taste of new generation as well as the need demanded in the modem living space is transcended its simple and solemn image embedded in wooden colored form, which is often found in existing products. First of all, the definition, kind, bottles, and glasses of wine are examined and then a cabinet is developed depending on the design process. The body of the wine cabinet is finished with black lacquer after attaching ash-patterned veneer on MDF and the front plate of the drawer is finished with the colors displayed in Mondrian's painting on MDF. The upper part is designed to store wine glasses and below the wine rack is the space for wine storage considering the overall shape. The storage at the lower part is equipped with drawers of different sizes to emphasize practicability. In conclusion, such a unique design is believed to introduce the importance of design to the domestic furniture market being a foundation for the furniture industry.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.153-167
• /
• 1989

This study was undertaken to analyze the growth of mandible in surgically repaired unilateral cleft lip and palate. The subjects consisted of 63 unilateral cleft lip and palate individuals, 60 class III malocclusions and 60 normal occlusions ranging from 6 to 15 years old. Each group was divided into two age groups. (6-10 Y and 11-15 Y) The results obtained from UCLP compared with other groups were as follows: 1. The anteroposterior position of the chin was similar to that of the normal occlusions. 2. The shape of the mandible was similar to that of the class III malocclusions. 3. In mandibular size, ramus height was the smallest among three groups, but body length and overall mandibular length were similar to those of the normal occlusions. 4. The lower border of the mandible was the steepest among three groups and strong vertical or clockwise growth tendency was indicated. 5. The position of condyle in relation to the cranial base showed little difference in three groups. 6. In older age group , vertical growth tendency of the mandible decreased more or less.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.99-103
• /
• 2011

Many parameters influence the frictional behavior of steel sheet during stamping. The contact pressure between a die and a sheet during stamping is one of them. Thus, this parameter is investigated for high strength steel (HSS) sheets, which are widely used for auto body panels due to their potential for weight reduction. Since HSS extend the limits of contact pressure for mild steel, the effect of this parameter on friction cannot be ignored. To investigate the influence of contact pressure on the frictional behavior of steel sheets, a flat type of friction test was conducted on three different steel sheets under various contact pressures. For bare steel sheets, the curve representing the relationship between contact pressure and friction coefficient exhibits a U shape. Coated steel sheets show a similar tendency except at low contact pressure. For these materials, when the contact pressure is very low, the friction coefficient slightly increases with pressure before it starts to decrease. The test results show that the effect of contact pressure on frictional behavior of steel sheet is not negligible even for contact pressures that are lower than the strength of HSS sheet.

• Journal of Korean Medical classics
• /
• v.25 no.4
• /
• pp.57-63
• /
• 2012

Objective & Method : We investigated the identity of tri-energizer, which was originally described in Huang Di Nei Jing and claimed by traditional scholars, and drew the following conclusions. Result & Conclusion : According to Huang Di Nei Jing tri-energizer is one of the six hollow-organs and is called hollow organs for digestion and elimination, water guffer organ, or solitary hollow organ. It is believed that tri-energizer is regarded as the existing entity based on following several different sources; it functions as the course of channels, regulates wind and link and physiological function-especially intrinsic function of upper, middle, lower internal organs. It also controls syndromes and dysfunction of an illness, the surface of the body, and the cracked surface of the skin. Finally, bold and timidity depend on the tri-energizer. Experts determined the true nature of tri-energizer types. Experts include: Yu Tuan from the Ming dynasty, Tang Jong Hai and Ye Lin from the Qing dynasty, and Zhang Xi Chun from the Zhunghua Minguo period. These experts' claims are based on shape and forms of tri-energizer. Our examinations of anatomical and physiological basis on tri-energizers showed that, in a narrow sense, tri-energizer indicates visceral and parietal peritoneum and omentum surrounding the internal organs, and in a broad sense, indicates the overall membrane wrapping around the whole internal organs including five visceral organs and six hollow organs.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.31-39
• /
• 1980

The basic pattern of skirt should be functional in addition to be fit the body. The author paid special attention to the expansion and contraction of the shell which were made the lower trunk and thigh caused by sitting motions. The replicas of the shell were taken by using a gypsum method on 1 female under 4 standardized motions; standing motion, (basic motion), sitting on the chair with flextion 90' at the hip and the knee joints sitting with dropping knees, and sitting with benting legs side wards. Those replicas obtained were developed to the patterns and changes in shape and area of those were measured. Typical displacement and transformation of the shell surface patterns were showed geographycally fig 5-1 to 5-4. mean values of expansion and constriction were obtained by measuring the shell surface on 60 female under the 4 motions. the mean values of it were showed numerically in Table 1-1 to 1-3. The following results were obtained; 1. Vertical constriction of front of the shell were observed near sulcus in guinalis, and vertical extension were near the knees. Horizontal extension were observed near the thighs and the knees. 2. Vertical constrictions of the back of the shell were observed near the knees. It seemed to be influnced the flexion angles of knee points. vertical extension were near gluteus and thighs. Horizontal constriction were small, and horizonlal extension were near gluteus. 3. The high rates of constriction and extension were found near sulcus in guinalis, glutes, and knees. 4. The rates of constriction and extension on the waist line were very low. 5. The highest values of constriction and extension were found in hip and knees.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.104-111
• /
• 2004

The melting temperatures of $UO_2,\;UO_2-6wt\%Gd_{2}O_3,\;UO_2-12wt\%Gd_{2}O_3,\;UO_2-2wt\%Er_{2}O_3,\;and\;UO_2-4wt\%Er_{2}O_3$ fuels were measured. Fuel materials were loaded in a tungsten capsule of which shape met the black body condition. The melting temperature was measured by the thermal arrest method during heating of the capsule in an induction furnace. The measured melting temperature of $UO_2$ fuel was $2815{\pm}20^{\circ}C$. The solidus and liquidus temperatures of $UO_2-Gd_{2}O_3\;and\;UO_2-Er_{2}O_3$ had also been measured, and it was observed that the solidus temperatures of them were lower than the liquidus temperature by $15{\sim}25^{\circ}C$. Measured melting temperatures of $UO_2,\;UO_2-Gd_{2}O_3\;and\;UO_2-Er_{2}O_3$ fuels were as follows:

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.105-111
• /
• 2015

Since 2007, Insurance Institute of Highway Safety(IIHS) has conducted the new bumper test using bumper barrier to estimate the repair cost of impacted vehicle. In this study, for the front body FE model of a medium size passenger car analyzes were carried out to optimize the shape of backbeam center reinforcement bracket. First, overlap effect was examined with changing the overlap magnitude and spot welds were added along the backbeam center line for reducing the section shear deformation. Next, for an overlap model design parameter study was performed for the bracket. Thickness effect was examined and an inner reinforcement was added to the bracket. Also, the lower part of bracket was deleted and additionally the bracket length was extended. The results were discussed in terms of backbeam backward deflection, barrier backstop intrusion and weight. Compared with the current design, the final model showed 44.1% bracket weight reduction with 30.0% decrease of backbeam deflection.

• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.405-415
• /
• 2005

It is difficult to classify tidal flat surface that is composed of a mixture of mud, sand, water and microphytobenthos. We used a Linear Spectral Unmixing (LSU) method for effectively classifying the tidal flat surface characteristics within a pixel. This study aims at 1) detecting algal mat using LSU in the Saemangeum tidal flats, 2) determining a suitable end-member selection method in tidal flats, and 3) find out a habitual characteristics of algal mat. Two types of end-member were built; one is a reference end-member derived from field spectrometer measurements and the other image end-member. A field spectrometer was used to measure spectral reflectance, and a spectral library was accomplished by shape difference of spectra, r.m.s. difference of spectra, continuum removal and Mann-Whitney U-test. Reference end-members were extracted from the spectral library. Image end-members were obtained by applying Principle Component Analysis (PCA) to an image. The LSU method was effective to detect microphytobenthos, and successfully classified the intertidal zone into algal mat, sediment, and water body components. The reference end-member was slightly more effective than the image end-member for the classification. Fine grained upper tidal flat is generally considered as a rich habitat for algal mat. We also identified unusual microphytobenthos that inhabited coarse grained lower tidal flats.