• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.199-207
• /
• 2001

The segmented TMA T-loop spring, used for reciprocal space closure and described by Burstone, was used to achievebodily movement of canine. Photoelastic analysis is a technique for the transformation of internal stress into visible light patterns. The two-dimensional photoelastic stress analysis was performed, and stress distribution was recorded by photography. The purpose of this study was to visualize photoelastically the distribution of forces transmitted to the alveolus and surrounding structures using new segmented TMA T-loop spring for canine retraction. The results were as follows: 1. Decreased activation produced decreased stress of upper 1st. premolar extraction site and increased intrusive stress of upper 1st. molar, regardless of T-loop position. 2. At 5mm activation, More posterior positioning of T-loop Produced an increased stress in upper 1st. premolar extraction site. 3. At 3mm activation, More posterior positioning of T-loop produced an increased stress in upper 1st. premolar extraction site and mesial lower half of upper 1st. molar mesio-buccal root. 4. At 1mm activation, More anterior positioning of T-loop produced an increased stress in upper mesial and blew apex area of upper canine root. 5. 0.25 B/L ratio and 3mm activation produced bodily movement of canine. To summarize, desired tooth movement and anchorage requirement is possible by altering the activation and mesio-distal position of the T-loop spring.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.209-221
• /
• 1995

The purpose of this study was to obtain the lingual morphology(angulation, inclination, horizontal and vertical contour) and lingual arch form of Korean adult with normal occlusion in order to provide the basic datas for lingual brackets and ideal lingual archwire. Dental models of thirty person with normal occlusion(Male : 16, Female :14) were selected for this study. Crown angulation, inclination. horizontal and vertical contour of lingual surfaces from Lt. 1st molar to Rt 1st molar of both upper and lower arch were measured. Lingual arcform was studied from copied papers of dental models attached Fujita lingual bracket. The results of this study were summarized as follows: 1. The average angulation and inclination of lingual surfaces of all tooth types for Korean adults with normal occlusion were obtained. 2. The average horizontal and vertical contour of lingual surfaces of all tooth types were obtained. 3. There were similar figures in horizontal and vertical contour of lingual surfaces between upper and lower molars, upper and lower premolars, upper and lower canines, upper central and lateral incisors and lower central and lateeral incisors respectively. It was possible that the use of those contour of bracket bases in common. 4. The average of lingual archform was provided, which was arch-shaped from canine to canine, linear along the premolars and molars with small offset bend between them, and where canines and premolars met, it was bent in a crank- shape. 3. There was no difference between lingual archform of male and that of female, although lingual archform of female was smaller than that of male in lower arch.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.37-49
• /
• 1999

Forty-four females with normal temporomandibular joint were compared with fifty-one females with abnormal temporomandibular joint. An orthodontic study model and lateral cephalometric radiographic were used to investigate the relationship between TMD group and non-TMD group in long face patterns. The result were followed that ; 1. There were no significant in overbite and overjet amount. 2. A mandibular 1'st molar inclination and height to the mandibualr plane were more mesial inclined in TMD groups. 3. The functional factors, which were craniocervical posture , tongue posture and hyoid bone position, were no significant.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.427-434
• /
• 2006

The form of furcation influence both the pathogenesis of periodontal destruction and therapeutic results. The present study was performed to evaluate the effect of root trunk length on clinical outcomes of guided tissue regeneration. Total 30 mandibular first molars were evaluated in this study. Probing pocket depth, clinical attachment level, vertical defect depth and horizontal defect depth were measured at baseline and 6 month after GTR. Correlation coefficients between root trunk length and other clinical measurement were analyzed. The results of this study were as follows 1. The mean root trunk length in lower 1st molar was 2.15 mm. 2. Probing pocket depth, clinical attachment level, vertical defect depth and horizontal defect depth were significantly reduced at 6 month postoperatively compared to values of baseline 3. Correlation coefficient between root trunk length and vertical defect depth at baseline was 0.406 showing the positive correlation 4. Correlation coefficient between root trunk length and horizontal defect depth at baseline was -0.463 showing the negative correlation. 5. Correlation coefficient between root trunk length and decrease of horizontal defect depth after GTR was 0.654 showing the positive correlation. In conclusion, the root trunk length maybe effector for clinical outcome after guided tissue regeneration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.501-532
• /
• 1996

This study investigated the effects of cantilever length, location and load condition on stress distribution developed in the implants, prostheses and supporting tissues. The osseointegrated prostheses with two 10mm Branemark implants at 2nd premolar and 1st molar sites with cantilever extensions at 1st premolar, 2nd and 3rd molar sites were constructed. Under 100N, 200N of vertical and $45^{\circ}$ oblique loads at the cantilever pontics, stress distribution patterns and displacement were analyzed with three dimensional finite element method. The results were as follows : 1. The stress was concentrated at the joint of the cantilever pontic and implant superstructure, the neck of implant and the ridge crest near the cantilever But there was little load transfer to the lower supporting tissues of implants. 2. The implant near the cantilever was displaced inferiorly while the implant far from the cantilever was displaced superiorly. In horizontal direction the implants were displaced to the direction where the loads were applied, except the apexes of the implants. 3. In case of anterior cantilever, the stress and displacement were higher than the prosthesis connected with natural tooth. 4. The stress developed in the posterior cantilevered type was higher than in the anterior cantilevered type. The greastest stress was concentrated at the ridge crest near the posterior cantilever. 5. The longer the cantilever, the more the stress was developed and was concentrated at the joint of the cantilever pontic and implant superstructure. 6. Under oblique load, the stress was concentrated at the necks of implants and the ridge crests, but decreased at the joint of the cantilever pontic and implant superstructure than under vertical load.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.43-54
• /
• 1985

Recently, rapid palatal expansion technique is widely used for the correction of the skeletal imbalance in Cl III malocclusion patients. There were many studies about the cephalometric changes to rapid palatal expansion but quantitative analysis were small. The purpose of this study was to analysis the stresses and displacement of the maxilla in human dry skull to rapid palatal expansion. The results were as follows: 1. The anterior portion of palate show more lateral and inferior displacement than the posterior portion. But the posterior portion show more anterior displacement. 2. In transpalatal suture area, the medial portion show more anterior and inferior displacement than the lateral portion. But the lateral portion show more lateral displacement than the medial portion. 3. In mid-sagittal plane, the lower portion (palatal area) of maxilla show more anterior, lateral, inferior displacement than the upper portion (frontamaxillary stuture area). 4. In zygomatic arch, the adjacent area to maxilla show tonsil. stresses and the adjacent area to frontal bone show compressive stresses. 5. The sequence of stress bearing area to R.P.E. is upper retromolar area, upper 1st molar, 1st premolar, 2nd premolar, anterior segment of teeth.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.115-121
• /
• 1999

This investing was carried out to evaluate the alteration of stress distribution on teeth and esthetic crowns. Analyzing the stress distribution by the two-dimensional finite element methods, a model of lower 1st molar according to the porcelain fused metal crown an the porcelain fused glass ceramic core crown and the all glass ceramic crown. 1. The pattern of stress distribution showed no apparent differences. 2. The greatest von Mises values were concentrated around the central fossa of all esthetic crowns. The greatest Maximum principle value were concentrated around the interface between the base of esthetic crown and the abutment tooth. It was found that the apatite glass ceramic could be applicable for use in dental crown prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• The Journal of the Korean dental association
• /
• v.11 no.4
• /
• pp.277-280
• /
• 1973

The author observed the changes of dental arch dimensions and compared spae-maintainer group with non-space-maintainer group after primary tooth extraction. The results were as follows 1) The rate of growth of dental arch of expeirmental group in intercanine width and in inter-1st molar width was more rapid than that of the control group. 2) Arch length is almost no dimensions but it was slightly decreased in lower arch. 3) Dental arch growth and tooth eruption were stimulated by space-maintainer appliance, so it is the best way to replace a new appliance at least once a year. 4) It is thought that satisfactory conclusions in this observation must be researched successively until the mixed dentition completes.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.73-85
• /
• 1995

Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.