• Applied Biological Chemistry
• /
• 제37권1호
• /
• pp.14-18
• /
• 1994

온도와 수분함량의 상호작용이 들깨종자의 압착착유에 미치는 영향을 살펴보기 위하여 생들깨와 볶은들깨의 기름 추출율(REO) 및 압착케이의 부피변형율(VSPC)을 온도와 수분함량을 변화시켜가며 측정하였다. 본 실험을 위해 들깨종자의 수분함량을 2.5, 4.5, 6.5 및 8.5% (w.b.), 압착온도를 30, 40, 50 및 $60^{\circ}C$, 압착시간을 11분 그리고 압착압력을 50 MPa로 각각 조절하였다. 생들깨 및 볶은들깨의 REO 및 VSPC는 온가 낮을 때에는 수분함량이 높을수록 크게 나타났으나, 온도가 높을 때에는 수분함량이 낮을수록 크게 나타났다. 그러나 수분함량 8.5%에서는 온도에 관계없이 작았다. 압착요인과 REO 및 VSPC과의 관계를 분산분석한 결과 온도와 수분함량의 영향은 높은 유의성을 보여주었다. 또한 온도보다는 온도와 수분함량사이의 상호작용효과가 더 큰것으로 나타났다. 온도와 수분함량 사이의 상호작용이 가장 크게 나타난 구간은 본 실험조건의 모든 온도에서 수부함량 $2.5{\sim}4.5%$이었다. 최대 REO는 생들깨의 경우 수분함량 2.5%와 $60^{\circ}C$의 온도에서 84.4%이었고, 볶은들깨는 수분함량 6.5%와 $30^{\circ}C$의 온도에서 84.3% 이었다.

• 대한기계학회논문집B
• /
• 제40권9호
• /
• pp.589-596
• /
• 2016

최근 들어 작동유체가 액체 상태를 유지하며 흡열 과정이 일어나는 증기동력사이클인 유기플래시 사이클이 제안되었다. 본 연구에서는 재생을 이용한 수정 유기플래시 사이클을 제안하고 현열 형태의 저온 열원을 사용하는 시스템의 열역학적 성능 해석을 수행하였으며 작동유체나 플래시 온도가 순생산 동력이나 열효율 등 시스템의 성능에 미치는 영향을 체계적으로 분석하고 논의하였다. 해석 결과는 시스템의 순생산동력은 플래시 온도에 대해 최대값을 갖지만 열효율은 플래시 온도에 따라 상승함을 보여준다. 재생 사이클은 기존의 유기플래시 사이클에 비해 시스템 열효율이 높고 저온 열원의 동력 변환에 있어 성능 개선을 위한 잠재성을 보여준다.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1085-1097
• /
• 1999

A separate heat pipe system capacity of 3,700kW has been developed and applied to preheating the blast furnace gas for recovery of the waste heat from boiler. The system is designed to preheat the blast furnace gas up to $126^{\circ}C$ by using tho boiler exhaust gas of which temperature is $180^{\circ}C{\sim}220^{\circ}C$. The arrangement of the fin tubes as well as the shape of the fin has been carefully determined to minimize the fouling problems. The heat pipe system was found to be stable in circulation of the working fluid and the range of the temperature variation of the preheated blast furnace gas was within $10^{\circ}C$. It was proved through a long-term test that the selected tube arrangement and the shape of the fins are proper to prevent the fouling problems and that the pay-back period of the system Is within one year.

• Korea-Australia Rheology Journal
• /
• 제20권1호
• /
• pp.27-34
• /
• 2008

Clay suspensions in liquid polymers exhibit a time-dependent behaviour that includes viscoelastic as well as thixotropic features. Because of the presence of interacting clay platelets, particulate networks can develop, which are broken down during flow and rebuild upon cessation of the flow. Here, the use of thixotropic techniques in probing flow-induced structures in nanocomposites is explored with data on a hectorite-poly(isobutylene) model system. By means of fast stress jump measurements the hydrodynamic contributions to the steady state stresses are determined as well as those caused by the stretching of the clay floes. Flow reversal measurements do not provide a clear indication of flow-induced anisotropy in the present case. The recovery of the clay microstructure upon cessation of flow is followed by means of overshoot and dynamic measurements. The development of a particulate network is detected by the appearance and growth of a low frequency plateau of the storage moduli. The modulus-frequency curves after various rest times collapse onto universal master curves, regardless of the pre-shear history or temperature. The scaling factors for this master curve are the crossover parameters. The crossover moduli are nearly a linear function of the crossover frequency, the relation being identical for recovery after shearing at different shear rates. This function depends, however, on temperature.

• 에너지공학
• /
• 제22권2호
• /
• pp.169-174
• /
• 2013

순산소 축열연소시스템에서 세라믹 볼 축열체 적용에 따른 축열/재생 특성에 관한 실험적 연구를 수행하였다. 설계인자인 볼 직경, 축열체 무게, 연소부하 변동에 따른 축열/재생 특성을 살펴보았다. 양방향 순산소 축열연소시스템 장치를 구성하여 축열체를 통과하는 배가스 및 산소의 온도를 측정하였다. 실험결과, 볼 직경과 축열체 무게 변동에 따라 배가스 및 산소 온도분포의 변화가 나타났으며, 연소부하 변동시 상대적으로 큰 온도분포의 변화가 측정되었다. 볼 직경이 작아지고 축열체 무게가 증가될수록 측정된 재생온도효율은 증가되었다. 한편, 높은 재생온도효율에 비해 열 회수율은 낮게 예측되어 열 회수율을 향상시키기 위해 축열구조 설계 최적화가 필요함을 확인하였다.

• 한국축산식품학회지
• /
• 제33권4호
• /
• pp.474-480
• /
• 2013

This study was performed to investigate the effects of high pressure/high temperature (HPHT) treatment on the recovery efficiency and characteristics of porcine placenta hydrolysates. The placenta hydrolysates were characterized by solubility, free amino acid contents, gel electrophoresis, gel permeation chromatography (GPC) and amino acid composition. Placenta was treated at 37.5 MPa of pressure combined with various temperatures (150, 170, and $200^{\circ}C$) or various holding times (0, 30, and 60 min at $170^{\circ}C$). Insoluble raw placenta collagen was partially solubilized (> 60% solubility) by the HPHT treatment. Free amino group content of placenta collagen was increased from 0.1 mM/g collagen to > 0.3 mM/g collagen after HPHT treatment, reflecting partial hydrolysis of collagen. The molecular weight ($M_w$) distribution showed evidence of collagen hydrolysis by shifting of $M_w$ peaks toward low molecular weight when treated temperature or holding time was increased. Alanine (Ala), glycine (Gly), hydroxyproline (Hyp), and proline (Pro) contents increased after the HPHT treatments compared to a decrease in the others. In particular, the increase in Gly was obvious, followed by Hyp and Pro, reflecting that placenta hydrolysates were mainly composed of these amino acids. However, increasing temperature or holding time hardly affected the amino acid compositions. These results indicate that the HPHT treatment is advantageous to hydrolyze collagen derived from animal by-products.

• 한국항해항만학회지
• /
• 제36권5호
• /
• pp.349-355
• /
• 2012

본 논문에서는 선박에서 배출되는 $CO_2$ 배출을 최소화하기 위한 노력의 일환으로 선박에서 배출되는 열에너지를 회수하고 재활용하여 극대화 시킬 수 있는 방안들을 조사하고 버려지는 열에너지를 이용하여 ORC(Organic Rankine Cycle) 발전장치를 구동함으로써 선박의 에너지 효율을 높이고 온실가스 배출을 최소화할 수 있는 방안들을 연구하였다. 선박에서 배출되는 배기가스의 폐열을 열원으로 하는 유기냉매 랭킨사이클을 구성하는 방안과 열에너지 비중은 높지만 상대적으로 낮은 온도인 해수냉각 시스템으로 배출되는 열에너지를 재활용하여 터빈 발전기를 구동하는 ORC 발전시스템을 설계하고 시뮬레이션 하였다. 시스템 해석 결과 배기가스에서는 1,000kW급, 해수 냉각 시스템에서는 650kW급 발전 출력을 얻을 수 있었고, 다양한 친환경 유기냉매를 이용하여 온도와 유량 조건에 따른 열 해석을 실시하여 시스템의 효율과 출력을 비교하였다.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.96-108
• /
• 2018

Large efforts have recently been made on research and development of sustainable and energy-efficient short-cut nitrogen removal processes owing to strong attention to the energy neutral/positive wastewater treatment system. Anaerobic ammonium oxidizing bacteria (anammox bacteria) have been highlighted since 1990's due to their unique advantages including 60% less energy consumption, nearly 100% reduction for carbon source requirement, and 80% less sludge production. Side-stream short-cut nitrogen removal using anammox bacteria and partial nitritation anammox (PN/A) has been well established, whereas substantial challenges remain to be addressed mainly due to undesired main-stream conditions for anammox bacteria. These include low temperature, low concentrations of ammonia, nitrite, free ammonia, free nitrous acid or a combination of those. In addition, an anammox side-stream nitrogen management is insufficient to reduce overall energy consumption for energy-neutral or energy positive water resource recovery facility (WRRF) and at the same time to comply with nitrogen discharge regulation. This implies the development of the successful main-stream anammox based technology will accelerate a conversion of current wastewater treatment plants to sustainable water and energy recovery facility. This study discusses the status of the research, key mechanisms & interactions of the protagonists in the main-stream PN/A, and control parameters and major challenges in process development.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.296-305
• /
• 2006

This study evaluate the effect of laundering on the deformation of knitted spandex/cotton fabrics compared with that of knitted cotton fabrics. Commercial knitted spandex/cotton and knitted cotton fabrics for T-shits were laundered in a drum-type washing machine and dried in a tumble dryer. Wale spirality, shrinkage, elastic recovery and surface contour of knitted fabrics were investigated under different laundering conditions: washing temperature, presoaking time and washing cycles. Knitted spandex/cotton fabrics had a lower angle of spirality than knitted cotton fabrics. After the first washing cycle, the angles of spirality of all the fabrics had decreased greatly. Knitted cotton fabric of low density deformed more than that of higher density. Knitted spandex/cotton. fabric of low density shrank less, because of the greater extension given during heat-set. Permanent elongation length at the 80$\%$ extension was longer than at the 50$\%$ extension, and the knitted spandex/cotton fabric which was expanded greatly during heat-set had a lower elastic recovery rate. The surface appearance of the knitted spandex/cotton fabrics was worsl~ than that of the knitted cotton fabrics before laundering and after repeated laundering, because of the much protruded cotton fibers from the yarns.

• 한국조경학회지
• /
• 제22권4호
• /
• pp.75-80
• /
• 1995

It is important to estimate the possibility of recovery in physiologically damaged woody plant. It is suggested that C.E.R(cambial electrical resistance) might be a useful method to predict the permanent wilting point. D/A and A/D converter can be used to measure the C.E.R and it took only 10-20 msec for a measurement and the values were stable during this study. A computer could be used for the continual measurement of C.E.R. There were very big daily changes of C.E.R. was changed according to the changes of indoor temperature, but the phase was slightly different. It is reasoned that daily changes in C.E.R. is induced by the changes of water potential and cambial thickness. It was difficult to detect the changes of C.E.R. caused by changes in soil moisture under high soil water potential. Under low soil water potential, the changes in soil moisture under high soil water potential. Under low soil water potential, the changes of C.E.R. can be detected. After wilting, C.E.R. is increased very rapidly. When C.E.R. is not decreased by watering, it will be permanent wilting point. But it takes several days to confirm the permanent wilting point. To predict the possibility of recovery from wilting, the values of C.E.R. have no meaning. But the changes of C.E.R. are significant. Therefore we can predict the permant wilting point in woody plant by monitoring the change of C.E.R. by the computer.