• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.27-37
• /
• 2020

Low temperature dyeing properties of wool with reactive dyes and acid dyes were investigated for the feasibility study of their application to hair dyeing. The low temperature(30℃, 40℃) dyeing achieved light depth of shade in wool dyeing and reactive dyeing exhibited relatively higher color strength and chroma values than acid dyeing. Leveling agent slightly improved the levelness of the wool dyeing and the leveling properties of dyed wool at low temperature were good to excellent, irrespective of the dyes applied. Color loss during the repeated shampooing was in the range of 9.6~22.2% for reactive dyes and -7.4~31.5% for acid dyes and in some cases, the color fastness to shampooing was reasonable level. The overall experimental results showed that the application of low temperature wool reactive dyeing to hair dyeing is sufficiently feasible in terms of dyeability and color fastness to shampooing.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.59-65
• /
• 1996

Cotton fabrics were treated by low temperature plasma and/or cellulase, and its physical and dyeing properties were investigated. All the pretreatments of the cotton with low temperature plasma of oxygen, nitrogen and argon slowed down the rate of weight loss of cotton in cellulase solution. Plasma pretreatment did not show any strength retention effect on cotton fiber in the subsequent cellulase treatment. Pretreatment of cotton with low temperature oxygen plasma decreased the rate of dyeing in direct dye bath, while cellulase or plasma/cellulase pretreatment increased the rate. Equilibrium dye uptake of cotton was not changed greatly by the pretreatments except the normal untreated cotton showed more or less high uptake. The pretreatment of cellulase with a water-soluble carbodiimide reduced the enzymatic activity, and did not show any strength retention of cotton in enzymatic weight loss.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2001.11a
• /
• pp.3-11
• /
• 2001

Fundamental studies at the CSIRO division of Wool technology and ICI on the diffusion of dyes into wool〔1,2〕have let to development of a new approach to wool dyeing. In this method, the cell membrane complex of wool is modified before dyeing by treatment under mildly alkaline conditions with a special chemicals. Wool pretreated with ethoxylated quaternary ammonium salt has an increased rate of dyebath exhaustion and dye penetration early in the dyeing cycle. This enables the treated material to be dyed below the boil for a similar time to the conventional cycle. This technique can be used on untreated and shrinkresist-treated wool and wool/nylon blends. In addition to good macro-levelness and excellent coverage of tippiness, the low temperature dyeing process give higher exhaustion levels of dyestuffs and insect-resist agent and hence cleaner effluent liquors, compared with conventional dyeing process. Low Temperature Dyeing process cause significantly less fiber damage than conventional way. The reduction in damage is reflected in improved processing performance of the dyed wool.

• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.37-42
• /
• 2009

The low melting PET yarn has sheath/core structure: sheath portion consists of low melting point PET and core portion is regular PET. Dyeing properties of fabric made from low melting PET yarn were investigated at different dyeing temperatures. It was found that the exhaustion yield on the low melting PET fabric was higher than on regular PET fabric. The total K/S value of the dyed low melting PET fabric increased as heat setting temperature increased above $150^{\circ}C$ because the sheath portion of the low melting yarn melted. Although fastness to light of the low melting PET fabric was similar to regular PET fabric, fastness to washing was inferior to regular PET fabric by 1 grade.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.672-677
• /
• 2009

To reduce the dependence of wool dyeing on the temperature several solvents with different properties and structures were added to the dye bath of C. I. Acid Yellow 42. Nearly the same total solubility parameters(${\delta}_t$) of solvents as those of wool fiber and hydrophobic part of the dyestuff were needed to increase disaggregation of dye molecules, loosening the wool fiber and wickabilty of dyeing solution; besides, the large surface tension(${\gamma}$) value of the solvents and the well balanced values of the three-component Hansen solubility parameters such as dispersion(${\delta}_d$), polar(${\delta}_p$), and hydrogen(${\delta}_h$) bonding parameters were required. Among the added solvents dimethyl phthalate(DMP) and acetophenone(AP) were satisfied with these conditions and worked the most successfully in the low temperature wool dyeing. Their effectiveness proven by the dyeing rate and the activation energy ($E_a$) of the dyeing was in the order of DMP > AP > DBE > CH > M >NONE. In conclusion the total solubility parameters(${\delta}_t$), the three-component Hansen parameters and the surface tension(${\gamma}$) of DMP and AP could be the guidelines to select suitable solvents for low temperature wool dyeing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.979-993
• /
• 2016

Mongolian cashmere sliver, yarn, and fabric were dyed and bleached with a solution of ascorbic acid and iron sulfate at $70^{\circ}C$, and then dyed using natural indigo powder at the dyeing temperature of $25^{\circ}C$ to $90^{\circ}C$ for 15-90 minutes using the IR dyeing machine. K/S values of bleached samples decreased significantly when dyed above $70^{\circ}C$ dyeing temperature for a longer dyeing time. Bleached cashmere fabric showed a greater loss of tensile strength than unbleached cashmere fabric, even when the samples were dyed at $40^{\circ}C$. With a higher dyeing temperature, yarns lost fullness, became thinner, and the pores between the yarns were enlarged. The x-ray diffraction pattern exhibited a prominent increase in crystallinity and the protein assay indicated a loss of protein in the bleached sample dyed at $90^{\circ}C$. Thinning of scales, fractured or raised tip of scales, and roughness on the entire surface of the fiber were also observed. The results indicate that bleaching and high temperature dyeing cause a serious damage to cashmere fibers. In addition, bleaching and high temperature dyeing cause significant fiber damage. Natural indigo dyeing using low temperature dyeing is recommended to produce blue color cashmere.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.192-194
• /
• 2008

The study has focused on the dyeing properties of 4 kinds of high temperature type mono azo disperse dyes, widely used in the dyeing factory, under the ultra low liqour ratio (1:4) dyeing condition. Among those, C.I. Disperse Red 343 and C.I. Disperse Blue 79 showed un-levelled dyeing results from the ultra low liquor ratio dyeing bath as well as poor dispersion stability under the high temperature. We recommended some leveling agents to improve the leveling behavior of these dyes mentioned above. The milling technology should be further developed to achieve the dispersion stability.