• Industrial Engineering and Management Systems
• /
• 제3권1호
• /
• pp.59-62
• /
• 2004

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficiency of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which have usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• 한국가구학회지
• /
• 제19권1호
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.83-89
• /
• 1999

Bast fibers of paper mulberry ( Broussonetia Kazinoki Sieb) were cooked with a weak alkaline salt, potassium carbonate which has been known as a major inorganic component of the traditional lye, and its cooking characteristics were investigated . The bast fiber was easily cooked by potassium carbonate. The pulp yield was rapidly decreased up to 20-30 mol of potassium carbonate, but the Kappa number was slowly decreased with increasing of potassium carbonate. The potassium carbonate pulps were easily defibered at low cooking chemical charge of 25mm on and high pulp yield of about 80%. These results were confirmed that pectin was easily removed during the potassium carbonate cooking. In contrast, when sodium carbonate was used as a cooling agent, the bast fiber was only partially defibered. Thus, sodium carbonate was a less effective cooling chemical of the bast fiber. The results of this experiment indicated that potassium carbonate could not only be used as a good cooling agent of bast fiber, but also as an alternative agent of sodium hydroxide.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.73-80
• /
• 1989

Preparation and characteristics of electroless Ni-P and Ni-B systems for semiconducting ceramics have been investigated as a function of deposit rate, reducing agent and pH variation. The effect of DMAB as ruducing agent is greater than that of sodium hypophosphite. The nickel electrode prepared from the nickel-phosphorus system with sodium hypophosphite shows low contact resistance of 0.99ohm compared with the resistance of 10chm in the electrode prepared from the nickel-boron system with DMAB. The contact resistance increases with increasing pH valuein the nickel-phosphorus system with sodium hypophosphite. The ratio of Ni to P is about 76.0/24.0 for the contact resistance of 0.99ohm in the above system.

• Clinical and Experimental Pediatrics
• /
• 제50권5호
• /
• pp.430-435
• /
• 2007

Even though we drink and excrete water without recognition, the amount and the composition of body fluid remain constant everyday. Maintenance of a normal osmolality is under the control of water balance which is regulated by vasopressin despite sodium concentration is the dominant determinant of plasma osmolality. The increased plasma osmolality (hypernatremia) can be normalized by the concentration of urine, which is the other way of gaining free water than drinking water, while the low plasma osmolality (hyponatremia) can be normalized by the dilution of urine which is the only regulated way of free water excretion. On the other hand, volume status depends on the control of sodium balance which is regulated mainly by renin-angiotensin-aldosterone system, through which volume depletion can be restored by enhancing sodium retention and concomitant water reabsorption. This review focuses on the urine concentration and dilution mechanism mediated by vasopressin and the associated disorders; diabetes insipidus and syndrome of inappropriate antidiuretic hormone secretion.

• 천문학회보
• /
• 제43권1호
• /
• pp.72.3-72.3
• /
• 2018

Since there are two-different observational constraints for the lunar exosphere data, it is interesting to find the best exospheric model that can account for the observed characteristics of the lunar coma and tail simultaneously (Lee & Kim, 2017).The characteristics of the lunar exosphere can be constrained by comparing simulated models with observational data of the coma and tail. In this work, considering effects of triple sodium sources (two dayside sources: a low- and a high-velocity component; and an Isotropic source component), we present time-dependent simulations showing initial conditions around the lunar coma and the final stage of the lunar tail. Based on an updated 3-D lunar exosphere model (Lee & Kim, 2017), we are presenting the simulated images of the lunar sodium coma and its correlation with lunar tail's physical parameters.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.24-41
• /
• 1984

Tallow fatty acid consists of mixtures of fatty acids differing in chain length and saturation. In separation of tallow fatty acid, the effects of the type and concentration of detergents and electrolytes were studied. And the changes of acid composition of particular fractions were determined by gas-chromatography. Sodium lauryl sulfate (SLS), sodium lauryl ether sulfate (SLES) and sodium lauryl benzene sulfonate (SLBS) were used as detergents and NaCl, Na2SO4 and MgSO4 were used as electrolytes. At low concentration of detergent, the tallow fatty acid was not fully wetted, and at high concentration, the emulsion was so stable that the tallow fatty acid was not well separated. The addition of proper amount of electrolyte increased the separation efficiency by the decrease of interfacial tension and by the increase of the amount of adsorbed detergent on the surface of solid fatty acid crystals. The optimum range of detergent was 0.4-0.6% (wt.) in SLS, 0.2-0.4% in SLES and 2.0-) .0% in SLBS. And the optimum range of electrolyte was 2.0-2.5% in NaCl, 3.0-4.0% In Na2SO4 and 0.5-1.0% in MgSO4 respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.105-106
• /
• 2017

Previous studies have confirmed the performance of pH reduction agents using liquid sodium phosphate based ammonium chloride as a pH reduction agent. In this study, the pH reduction performance considering economical and applicability as a practical stage and the property change analysis for the identification of the reaction mechanism of the pH reduction agent were carried out. As a result, the pH reduction performance at a low rate of the pH reducing agent was confirmed. The specific gravity of CaO decreased significantly after XRF analysis. It is also believed that this reduces the amount of Ca(OH)₂ produced and contributes to pH reduction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.373-374
• /
• 2005

NaOCl (Sodium hydrochlorite) have similar smell of chloride and solution of straw color. And boiling point is $110^{\circ}C$, specific gravity is 1.0(50g/l)/1.1(100g/l), Value of pH is 12. NaOCl playa role as bleach, a oxidizer, a germicide, a decolorant, a deodorant, treatment of water supply and drainage, food addition agent because strong oxidation, bleaching, sterilization effect is had. When NaOCl is produced in electrolysis of seawater, this system is composed of injection system by directly electrolysis of salt water on the spot and sodium hydrochlorite generate a safe low concentration(0.4~0.8 %).

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.311-314
• /
• 1992

A new monocyclic ${\beta}-lactam$ analogue, sodium (3R,4S)-3-[2-(2-aminothiazol-4-yl)-(Z)-2-methoxyi minoacetamido]-4-methoxymethyl-2-azetidinone-1- sulfonate (3) was synthesized from L-aspartic acid. Starting from L-aspartic acid, (S)-1-benzyl-4-benzyloxycarbonyl-2-azetidinone (7) was synthesized in four steps by following the established procedures and converted into (3R,4S)-3-amino-1-t-butyldimethylsilyl-4-methoxym ethyl-2-azetidinone (13) in six steps. Acylation of the amino group of 13 with $2-amino-{\alpha}$ -(methoxyimino)-4-thiazoleacetic acid, desilylation, and sulfonation with sulfur trioxide-pyridine complex followed by ion exchange afforded sodium (3R,4S)-3-[2-(2-aminothiazol-4-yl)-(Z)-2-methoxyi minoacetamido]-4-methoxymethyl-2-azetidinone-1- sulfonate (3). Antibacterial activities of this ${\beta}$ -lactam compound 3 were, however, found to be quite low compared to cefotaxime.