• 지구물리와물리탐사
• /
• 제27권1호
• /
• pp.23-36
• /
• 2024

이 논문에서는 중력, 자력, 및 탄성파 자료를 이용하여 한일공동개발구역(Korea-Japan Joint Development Zone, JDZ)의 구조를 분석했다. 중력과 자력 자료를 분석한 결과 제주 분지 일원에서 낮은 중력 및 자력 이상을 보이는 영역이 확인되었다. 또한, 분지 경계를 확인하기 위하여 부게 이상 자료에 총수평 기울기(total horizontal gradients)를, 그리고 총자기 이상 자료에 어넬리틱 시그널(analytic signal)을 적용한 결과 분지 경계를 확인할 수 있었다. 높은 대자율을 보이는 타이완-신지 벨트는 북동-남서 방향으로 JDZ의 중심을 가로지르고 있으며 관입암체로 추정되는 암상들이 JDZ에 산발적으로 나타난다. 3차원 자력 및 중력 역산 결과는 대자율과 밀도의 높은 상관 관계를 보였다. 제주 분지와 호 분지에서 낮은 밀도 분포를 나타내며 타이완-신지 벨트에서는 높은 대자율 분포를 보여준다. 제주 분지 일원 측선에서 밀도 단면도와 탄성파 단면도를 비교한 결과 높은 밀도는 화성 활동에 의한 암상(sill), 지루(horst), 기반암 상승부와 연관 있으며 낮은 밀도는 기반암이 함몰된 지구(graben)과 연관된 것으로 해석된다. 이 결과는 탄성파 자료와 중자력 자료를 활용한 융합 해석법이 JDZ 일원의 지하구조 특성을 효과적으로 파악할 수 있음을 제시한다.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.117-126
• /
• 2003

Due to excellent corrosion resistance and mechanical properties, austenitic stainless steel is widely used as the material for chemical plants. nuclear power plants, and food processing facilities. But, the zone affected by heat in the range of 400 to $800^{\circ}C$ during welding loses corrosion resistance and tensile strength since Cr-carbide precipitation like $Cr_{23}C_6$ forms at the grain boundary and thereby takes place the intergranular corrosion. In this study, AISI 304 stainless steel with the added Nb of 0.3 to 0.7 wt% was solutionized at $1050^{\circ}C$ and sensitized at $650^{\circ}C$. Specimen was welded by MIG. The phase and the microstructure of the specimens were examined by an optical microscope, a scanning electron microscope, and a x-ray diffractometer. The corrosion characteristics of specimens were tested by electrolytic etching and by double loop electrochemical potentiokinetic reactivation method(EPR) in the mixed solution of 0.5M $H_2SO_4$ + 0.01M KSCN. The melting zone had dendritic structure constituted of austenitic phase and $\delta$-ferrite phase. Cr carbide at the matrix did not appear, as Nb content increased. At the grain boundaries of the heat affected zone, the precipitates decreased and the twins appeared. The hardness increased, as Nb content increased. The hardness was highest in the order of the heat affected zone>melted zone>matrix. According to EPR curve, as the Nb content decreased, the reactivation current density(Ir) and the activation current density(la) were highest in the order of the melted zone

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.71-79
• /
• 2016

The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

• ALGAE
• /
• 제24권1호
• /
• pp.31-38
• /
• 2009

The brown algae padina concrescens is widely distributed in the northwestern Pacific Mexico. We described the population of P. concrescens based on population parameters such as cover, density and size structure and reproduc-tion at two levels tide at the intertidal area in the southwestern Baja. California Peninsula. Monthly visits from January to December 2003 were done. Both cover and density were measured in situ by quadrants method. Samples were collected to obtain size structure and percentage of reproductive fronds. Our results show there is sparial vari-ation in the population structure more than temporal. Thus, cover and density peak were at different months ineach tide level studied, the lower tide level shows the high values in cover as well as density. The frond develop-ment was observed in height/width ratio this relation was consistent only in the low tidal zone. Size class distribu-tion has consistently small size plants in both tide levels.Reproduction was seasonal in the tide channel but in both tide levels all the reproductive plants were tetrasporophyte. Our results suggest that this population is pseudopere-nial and it strongly as a consequence of the intense competition in the intertidal zone.

• 한국항해항만학회지
• /
• 제27권3호
• /
• pp.329-333
• /
• 2003

Study of the background and state of Osaka's waterfront space development and analysis of the functions of 22 chosen major facilities of development project reveals the following four types: amenity-oriented development, large-scale synthesis type development, renewal compound area type development, exchange communication promotion type development. Osaka bay area has served primely as the base of harbors, industry and energy, while analysis of the ongoing project has found that the city has been making a functional transition to a type of development to live up to the needs of the times, suggesting that is wise that Korea's future direction of waterfront development be oriented toward environmental-friendly development by taking advantage of low-density area's natural resources. Given the plurality and complexity of the law of coastal zone, what is needed is a legal maintenance for coastal zone's clear-cut coordinating function and for environmental-friendly development with the limitations of seaside and coastal functions in mind.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• 천문학회보
• /
• 제41권1호
• /
• pp.42.2-42.2
• /
• 2016

It is well known that theoretical models of Wolf-Rayet stars are not consistent with observational data in terms of temperature and stellar radius. Recent study in analytical and numerical simulations show the importance of density inhomogeneity in stellar envelope. Using 1-dimensional numerical simulations, we study how such clumpiness arisen over convective surface of Wolf-Rayet stars affect their evolutionary path. Starting from pure helium star models, we constructed 21 different initial conditions by varying stellar mass, metallicity, and the clumpiness of the sub-surface convection zone. We run the simulations until the oxygen-burning is reached and find that the influence of the clumpiness is sensitive to the initial metallicity. Our models with high metallicity including the effect of the density inhomogeneity can roughly explain the observed properties of Wolf-Rayet stars such as stellar radius and temperature. By contrast, despite a considerable amount of density inhomogeneity is given, low metallicity models could not fully explain observations. To understand the inconsistency in low metallicity models, detailed study with improved model is required, taking account of the error range of the observations.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.132-137
• /
• 2009

The purpose of this study was to suggest urban regeneration methods for deteriorated downtown residential area, considering the development condition of urban blocks. Through the research that are based on literature, field survey, urban planning map and local experts consulting, it found out suitable sites for development such as a deteriorated residential zone or a unused site and it was deduced eight development types from analyzing the characters of developable sites. And then it is suggested various housing forms which were applied to eight development types of developable sites. The consequences of this research are summarized as follows. There are various housing forms by eight development types; block housing, low rise-high density court housing, medium low rise-high density housing, urban housing for low-income groups belong to T1-development of urban strategic position; block housing, housing on hilly site, semi-detached house, lodging house, urban housing for low-income groups, elderly housing belong to T2-development for living benefit; block housing, low rise-high density court housing, housing on hilly site, low rise housing, lodging housing, urban housing for low-income groups, elderly housing belong to T3-development of a small-scale rental housing; block housing, low rise-high density court housing, medium low rise-high density housing, terrace-house, housing on hilly site, low rise housing, block-typed detached house, semi-detached house, cluster-typed low rise housing, town house, urban housing for low-income groups belong to T4-residential environment renewal development; terrace-house, housing on hilly site, low rise housing, block housing, semi-detached house belong to T5-development of a small-scale housing; terrace-house, housing on hilly site, low rise housing, cluster-typed low rise housing belong to T6-development to adapt natural environment; block housing, low rise-high density court housing, low rise housing, block-typed detached house, town house belong to T7-development for community; block housing, low rise-high density court housing block housing, medium low rise-high density housing, terrace-house, housing on hilly site, low rise housing, elderly housing belong to T8-development of environment-friendly.

• 천문학회보
• /
• 제37권1호
• /
• pp.80.1-80.1
• /
• 2012

NGC 6803 is an elliptical ring shape planetary nebula. We analyzed the high dispersion spectra which had been observed with the Hamilton Echelle Spectrograph attached to the 3-m Shane telescope of Lick Observatory. We also investigated the low dispersion UV spectral data obtained with the 60-cm interstellar ultraviolet explorer. Diverse excitation lines were found from neutral to quadruply ionized ions. The temperature diagnostic lines indicate relatively low electron temperatures, i.e., $T_{\epsilon}{\leq}9500$ K for most lines except for [ClIV] - 11,500 K. In spite of its simplistic bi-laterally symmetrical elliptical shape, the nebula appears to be very complex of a hugh density range from 1300 to 80,000 $cm^3$. A comparison of the two epoch data suggests that the density increase occurred in the high excitation line zone near the inner boundary. We derived the chemical abundances of He, C, N, O, Ne, S, Ar, Cl, and K. The chemical abundances of NGC 6803 are enhanced compared with the average Galactic planetary nebula. Our self-consistent photo-ionization model study implies that the effective temperature of the central star is 90,000 K and its luminosity is 2400 $L_{\odot}$. The evolutionary track suggests that the progenitor of NGC 6803 was about 0.9 -- 1.0 $M_{\odot}$ star, which might be born from a metal-rich zone near the galactic disk, but now relocated into the present high Galactic latitude.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.356-362
• /
• 2019

We collected AIS information on fishing vessels operating near Jeju Island, and analyzed appearance density of the Chinese fishing vessels and inferred the movements of the fishing grounds. AIS information was received from October 16, 2016 to October 16, 2017 and stored on a hard disk through a program called AisDecoder. Unauthorized fishing vessels within the Exclusive Fisheries Agreement Zone (EFAZ) operated near the EFAZ boundary, and the frequency of appearance of fishing vessels were high in the middle waters of Korea and Japan, 252 and 250 fishing zones. Chinese fishing vessels authorized to enter appeared scattered outside the Prohibiting Fishing Zone of the Large Trawlers (PFZLT), and the closer they were to the PFZLT boundary, the higher the appearance density. And the appearance of Chinese fishing vessels with a speed from 0 to 3 knots was mostly outside the EFAZ, showing high density in the waters close to the boundary between Korea and Japan. On the other hand, within the EFAZ, the frequency of appearance of Chinese fishing vessels was also low and scattered. The appearance of Chinese fishing vessels with a speed from 3 to 5 knots mostly shows some variability within the EFAZ, but the frequency of appearance was high and the density was high. The seasonal appearance of Chinese fishing vessels in the waters south of Jeju Island appeared in the southwest in the autumn and then moved south and southeast of Jeju Island in the winter, and in the spring and summer. They were considered going to other fishing grounds without fishing in the waters south of Jeju Island.