• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.211-220
• /
• 2013

The nailed joints in wood construction are commonly designed to resist and carry the lateral load but also subject to withdrawal force like uplift load due to the wind. This research was conducted to evaluate the performance of nailed joint composed of dimension lumber and sheathing materials through the nail withdrawal and unsymmetric double shear joint test, and then compared to current design values. The withdrawal strength was greatly dependant on wood specific gravity, and the withdrawal strength of I-joist with OSB showed higher value in spite of low specific gravity. The maximum withdrawal loads were greater than that of derived current design values about 5 times. The lateral resistance of Japanese larch/OSB nailed joints was higher than that of SPF/OSB nailed joint, and derived allowable lateral strength of nailed joints in this study exceeded the current design values. The failure mode of nailed joints was primarily due to the nail bending and this tendency was notable in SPF/OSB nailed joint.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.199-206
• /
• 2017

This paper analyzed structural behaviors of the staggered truss system, typically used in low seismicity regions, resisting the lateral loads such as wind and seismic load. A comparative study of cost and efficiency was carried out by analysing and designing the 10- and 20-story buildings with various types of truss, including pratt, howe, warren, K-, and vierendeel, which may typically be used in staggered truss system. In design, column and truss members are selected in group, and the efficiency of the member design was judged by average demand capacity ratio of the all members in same group. And economic analysis of the system was investigated by the quantity of the structural members. As a result, staggered truss system with the pratt truss and warren truss showed the most economical and efficient performance for 10-story building, and 20-story building, respectively.

• Journal of Hydrogen and New Energy
• /
• v.7 no.1
• /
• pp.29-37
• /
• 1996

Alkaline water electrolysis has been commercialized as the only large-scale method for a long time to produce hydrogen and the technology is superior to other methods such as photochemical, thermochemical water splitting, and thermal decomposition method in view of efficiency and related technical problem. However, such conventional electrolyzer do not have high electric efficiency and productivity to apply to large scale hydrogen production for energy or chemical feedstocks. Solid polymer electrolyte water electrolysis using a perfluorocation exchange membrane as an $H^+$ ion conductor is considered to be a promising method, because of capability for operating at high current densities and low cell voltages. So, this is a good technology for the storage of electricity generated by photovoltaic power plants, wind generators and other energy conversion systems. One of the most important R&D topics in electrolyser is how to minimize cell voltage and maximize current density in order to increase the productivity of the electrolyzer. A commercialized technology is the hot press method which the film type electrocatalyst is hot-pressed to soild polymer membrane in order to eliminate the contact resistance. Various technologies, electrocatalyst formed over Nafion membrane surface by means of nonelectrolytic plating process, porous sintered metal(titanium powder) or titanium mesh coated with electrocatalyst, have been studied for preparation of membrane-electrocatalyst composites. In this study some experiments have been conducted at a solid polymer electrolyte water electrolyzer, which consisted of single cell stack with an electrode area of $25cm^2$ in a unipolar arrangement using titanium mesh coated with electrocatalyst.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.377-387
• /
• 2004

This study has been performed to clarify the characteristics of temporal and spatial distribution of surface ozone concentration over Jeju Island, one of the cleanest areas in Korea with low emissions of air pollutants. Ozone data are monitored at four sites in Jeju Island. These monitoring sites are located at two urban area(referred to Ido and Donghong), coastal area(Gosan site) and forest site(Chuna site). Ozone data has been routinely collected at these sites for the late four years. The patterns of seasonal cycle of ozone concentrations at all stations show the bimodal with the peaks on spring and autumn and a significant summer minimum. However, the patterns of diurnal variations at rural station, i.e., Gosan and Chuna sites are considerably different to those at urban stations such as Ido and Donghong sites. The patterns of $\DeltaO_3$ variations are very similar with those of monthly mean ozone concentrations and $\DeltaO_3$ values are exceeded 30 ppb, at urban stations. This may be that urban stations are more influenced by local photochemical reactions rather than rural stations. In order to assess the potential roles of meteorological parameters on ozone formation, the meteorological parameters, such as radiation, temperature, and wind are monitored together with ozone concentrations at all stations. The relationships of meteorological parameters to the corresponding ozone concentration are found to be insignificant in Jeju Island. However, at Gosan and Donghong stations, when the sea breeze blew toward the station, the ozone concentration is considerably increased.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.58-72
• /
• 2003

Rooftop greenery has been used as a way to solve urban environmental problems by creating green space in densely populated cities. This study was carried out to suggest more effective designs for roof-garden at hospitals through a post-occupancy evaluation. The roofgarden of Asan Medical Center was evaluated with regards to setting, proximate environmental context, users, and design activity by a multi-method including plan investigations, observations, in-depth interviews and questionnaires. The results are summarized as follows; the users' main activities included resting, walking, and talking. A number of users were observed at shaded spaces sitting on such things as benches, pergolas, and shelters. The satisfaction of the users showed high satisfaction level except in the amount of shade, facilities, and shelter. The variables affecting a overall satisfaction were ‘accessibility’, ‘safety’, ‘quality of surroundings’, and ‘suitability for speculation’. By comparing the design concept with using pattern, designer's intention was not reflected sufficiently in several aspects such as ‘event deck for therapy programs’, ‘grove and path’, and ‘low planters’. This study suggests some design implications; it is necessary to furnish shaded sitting places for passive behaviors and pathways for walking or a light exercise. A wind-break wall with glass windows could widen the users' views in a limited space. Natural shade like tree shade or pergola are more desirable than artificial shades. As for the vertical location of the roofgarden, the middle floor could be better than top area for accessibility. Characteristics of building and users should be considered in detail to provide distinct spaces. Proper technical standards for the greening of artificial ground should be established.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.25-29
• /
• 2016

The high temperature superconducting (HTS) contra-rotating propulsion (CRP) systems comprise two coaxial propellers sited on behind the other and rotate in opposite directions. They have the hydrodynamic advantage of recovering the slipstream rotational energy which would otherwise be lost to a conventional single-screw system. However, the cooling systems used for HTS CRP system need a high cooling power enough to maintain a low temperature of 2G HTS material operating at liquid neon (LNe) temperature (24.5 - 27 K). In this paper, a single thermo-syphon cooling approach using a Gifford-McMahon (G-M) cryo-cooler is presented. First, an optimal thermal design of a 1.5 MW HTS motor was conducted varying to different types of commercial 2G HTS tapes. Then, a mono-cryogenic cooling system for an integration of two 1.5 MW HTS motors will be designed and analyzed. Finally, the 3D finite element analysis (FEA) simulation of thermal characteristics was also performed.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.131-140
• /
• 1996

Analysis of hourly variations of sulfur dioxide ($SO_2$) concentrations affected by regional climates for the period of yellow sandy dusts was carried out from March 31 through April 9, 1993. The concentration of 50, at a coastal city, Kangnung city, was much higher than that at an inland city Wonju in the west, but the hourly distrbutions of $SO_2$ concentrations show a similar tendency at both cities. Under the prevailing synoptic-scale westerly winds blowing over a high Mt. Taegualyang in the west toward Kangnung city in the eastern coastal region, the $SO_2$ at Kangnung is trapped by an easterly sea-breeze during the day and under prevailing easterly winds, it is also isolated by the high wall of Mt. Taegualyang, with its high concentration from 14 to 16 LST. Furthermore, when the westerly winds were dominent all day long the high $SO_2$ concentrations at Kangnung were produced by its intrusion from a urban city, Wonju or China in the west into a mountainous coastal city, Kangnung, to some extent, and when the air becomes rapidly cooled down at the clear daytime or the nighttime, their concentrations are also increased by a great amount of heating fuel combustion. Especilly, its maximum concentrations were shown in Wonju and Kangnung from 08 LST through 10 LST, due to the increase of auto vehicles near the beginning time of office hour and were detected again after sunset due to both increases of vehicles at the end of office hour and heating fuel combustion. During the period of Yellow Sandy Dusts which are transported from China into Korea, the $SO_2$ concentrations on rainy days at Wonju and Kangnung were much lower than the monthly mean values of $SO_2$, and their low concentrations could be caused by the scavenging process of rain.

• Journal of Environmental Science International
• /
• v.20 no.12
• /
• pp.1521-1531
• /
• 2011

This study was carried out to determine the characteristics of the marine environment, including nutritional content, in order to clearly understand the outbreaks of Gonyaulax polygramma in the southern coastal areas in August, 2009. Samples were collected at 13 sites and water temperature and salinity were measured using a CTD. Field surveys were twice: the first between August 5-7, the second between August 22-24. The cell density of G. polygramma was 6,500-10,000 cells $ml^{-1}$ during the $1^{st}$ survey, whereas during the $2^{nd}$ survey the range of the cells was recorded from 8,000 to 12,500 cells $ml^{-1}$. Cochlodinium polykrikoides ranged from 0 to 105 cells $l^{-1}$ during the field survey. In water environments, the majority stations during the $1^{st}$ survey showed a nearly homogeneous water column below $1^{\circ}C$ in temperature, as well as similar profiles of salinity. However, the stratification between the surface and bottom was observed in the $2^{nd}$ survey. Regarding nutrients, Dissolved Inorganic Nitrogen (DIN) in the surface ranged from 0.144 to 0.236 mg $l^{-1}$ during the $1^{st}$ survey, and 0.082-0.228 mg $l^{-1}$ during the $2^{nd}$ survey. DIP (Dissolved Inorganic Phosphorus) did not show any difference in concentration between the $1^{st}$ and $2^{nd}$ survey. During August of 2009, the wind speed in the southern waters remained at around ${\leq}2\;m\;s^{-1}$ for about 60% of time, and there was very little precipitation during the month. Irradiance of ${\geq}10$ hr was shown in the late of August. It is thought that a low level of DIN and salinity play an important role as an essential factor for rapid growth, wide distribution and longer duration of red tide in G. polygramma.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.221-230
• /
• 2017

To determine the effect of air pollution reduction policies, the long-term trend of air pollutants should be analyzed. Kolmogorov-Zurbenko (KZ) filter is a low-pass filter, produced through repeated iterations of a moving average to separate each variable into its temporal components. The moving average for a KZ(m, p) filter is calculated by a filter with window length m and p iterations. The output of the first pass subsequently becomes the input for the next pass. Adjusting the window length and the number of iterations makes it possible to control the filtering of different scales of motion. To break down the daily mean $PM_{10}$ into individual time components, we assume that the original time series comprises of a long-term trend, seasonal variation, and a short-term component. The short-term component is attributable to weather and short-term fluctuations in precursor emissions, while the seasonal component is a result of changes in the solar angle. The long-term trend results from changes in overall emissions, pollutant transport, climate, policy and/or economics. The long-term trend of the daily mean $PM_{10}$ decreased sharply from $59.6ug/m^3$ in 2002 to $44.6ug/m^3$ in 2015. This suggests that there was a long-term downward trend since 2005. The difference between the unadjusted and meteorologically adjusted long-term $PM_{10}$ is small. Therefore, we can conclude that $PM_{10}$ is unaffected by the meteorological variables (total insolation, daily mean temperature, daily mean relative humidity, daily mean wind speed, and daily mean local atmospheric pressure) in Busan.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.41.1-41.1
• /
• 2012

Interactions between the galactic interstellar medium (ISM) and the intra cluster medium (ICM) are believed to be one of the main processes affecting galaxy evolution in cluster environments. The aim of our research is to study the molecular gas properties of a galaxy under the ICM pressure in the cluster environment. It has been well known that cluster galaxies are deficient in atomic hydrogen gas (HI gas) compared to their field counterparts and now there is much evidence that low density ISM is being removed by ram pressure due to ICM wind. Meanwhile, no significant molecular gas deficiency of the cluster galaxy population has been found yet they show overall lower star formation rate than galaxies in the field, and it is still puzzling how the star formation could decrease without stripping of dense molecular gas. To address this issue, we probe the detailed molecular gas properties of NGC 4402, located near the cluster center, as part of a study of four spiral galaxies in the Virgo Cluster. NGC 4402 is well known undergoing ram pressure stripping with a truncated HI disk($D_{HI}/D_{opt}$ - 0.75 and only 36% of HI gas compare to field galaxies of a similar size) and a disturbed gas morphology. Comparing the high resolution 12CO and 13CO data of NGC 4402 from the Sub Millimeter Array (SMA) with existing other wavelength data, we probe the spatial distribution and a physical condition of molecular gas under strong ICM pressure. We discuss the star formation activity might have been altered and hence how the global color of NGC4402 would change in the future.