• Journal of Korea Water Resources Association
• /
• v.53 no.7
• /
• pp.521-531
• /
• 2020

The purpose of this study is to suggest a quantitative assessment of wetland damage considering the effects of topsoil erosion and deposition from rainfall. In the Cheoncheon Basin located upstream of the Yongdam Dam, 16 wetlands are located, but the lacustrine and small palustrine wetland were analyzed for possible damage to erosion and deposition. As a result of applying typhoon events in 2002 and 2003, the sediment load from the upper basin was the highest at 2.30% (22,548 ㎥) of low water capacity. The average sediment load in the mountain areas was found to be 0.03% of the low water capacity, and it was analyzed to be less damaging than the lacustrine with relatively large watershed. as a result of the model, the lacustrine wetland, where a large area is used as agricultural land, shows a high probability of sediment yield, so it is highly likely to damage the wetland by topsoil erosion.

• Journal of Environmental Health Sciences
• /
• v.32 no.6
• /
• pp.539-542
• /
• 2006

The objective of this paper is to compare the applicability of assimilable organic carbon (AOC) or biodegradable dissolved organic carbon (BDOC) for quantifying biodegradable organic material (BOM) and bio-stability in distribution systems for a variety of finished waters. The study the data is derived from was part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different waters on distribution system water quality. Seven different finished waters were produced from surface, ground, or brackish water on site and fed 18 independent pilot distribution systems (PDSs), either as single finished water or as a blend of several finished waters. AOC and BDOC have often been used as indicators of bacterial regrowth potential in distribution systems. In this study, AOC was the more useful assay of the two for the BOM concentrations observed in the PDSs. BDOC did not distinguish BOM while AOC did at the low BOM levels from many of the advanced treatments (e.g. RO, $O^3/BAC$). AOC in contrast allowed much more meaningful calculations of the consumption or production of AOC as the blends passed through the PDSs even for very low BOM blends. In addition, meaningful trends corresponding to changes in heterophic plate count (HPC) were observed for AOC but not for BDOC. Moreover, AOC stability was associated with waters produced from advanced membrane treatment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.18-18
• /
• 2012

In Japan, about 67% of the land is covered by forests and about 41% of them consist of plantations. About 35% of the plantations consist of old-aged plantations of older than 50 yearsand the percentage is projected to 67% in ten years' time. Although the trees of these plantations are supposed to be cut for timber production, most of them remain unmanaged and thus overcrowded mainly due to declining domestic forest industry. Since the forests are mostly located in headwater watershed, there are growing concerns about the degradation of water resources by these unmanaged plantations. To understand the ecohydrological processes in these plantations and examine the effect of intensive 50-60 % thinning to increase infiltration rate and reduce overland flow and soil erosion by recovering understory vegetation, the JST-CREST project "Development of Innovative Technologies for Increasing in Watershed Runoff and Improving River Environment by the Management Practice of Devastated Forest Plantation (Representative: Yuichi Onda)" has been launched since 2009. The ultimate objective of this project is to provide potential scenario to enhance low flow discharge in drought period and reduce turbid material in high flow period. We have been conductingintensive field observation campaign in five research sites across Japan. In Fukuoka site, integrated ecohydrological observations have been conductedin two contrastive watersheds since 2010. Intensive 50% thinning was conducted from January to April 2012 and comparative studies of ecohydrological processes before and after thinning have been started. The interim results from all the sites of this project will be presented in the 3rd International Congress for Forest and Water in a Changing Environment held in Fukuoka during 18-20 September, 2012 (http://www.forest.kyushu-u.ac.jp/~ecohydrol/3ForestWater/index.html).

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.820-829
• /
• 2017

Vegetable oil dielectrics have been used in transformers as green alternatives to mineral insulating oils for about twenty years, because of their advantages of non-toxic, biodegradability, and renewability. However, the viscosity of vegetable oils is more than 3 times of mineral oils, which means a poor heat dissipation capacity. To get low-viscosity dielectrics, transesterification and purification were performed to prepare vegetable oil methyl esters in this study. Electrical and physical properties were determined to investigate their potential as dielectrics. The results showed that the methyl ester products had good dielectric strengths, high water saturation and enough fire resistance. The viscosities (at $40^{\circ}C$) were 0.2 times less than FR3 fluid, and 0.7 times less than mineral oil, which indicated superior cooling capacity as we expected. With the assistance of 0.5 wt% pour point depressants, canola oil methyl ester exhibited the lowest pour point ($-26^{\circ}C$) among the products which was lower than FR3 fluid ($-21^{\circ}C$) and 25# mineral oil ($-23^{\circ}C$). Thus, canola oil methyl ester was the best candidate as a low-viscosity vegetable oil-based dielectric. The low-viscosity fluid could extend the service life of transformers by its better cooling capacity compared with nature ester dielectrics.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.363-372
• /
• 2002

Reducing the fat content of processed meat products can be performed by (1) using leaner raw meat materials (2) inducing non-meat ingredients that serve to replace a portion or all of the fat, and (3) applying new ingredient combinations, technologies or processing procedures that decrease the fat and cholesterol content of meat products. Low-fat meat products were manufactured with Int replacers which were food ingredients that had the functional and sensory properties of fat without contributing fat calories, resulting in lower fat(<3%) content. Added water, non-meat proteins, carbohydrates, such as starch and hydrocolloids(gums) and vegetable oils have been used as typical fat replacers to be used in meat products. In addition, fat substitutes included structural lipids, sucrose polyester and ingredient combinations. Formulations for the manufacture of low-fat meat products in combined with new technologies have focused on the use of fat replacer combinations that contributes a minimum of calories and not detrimental to flavor, juiciness, mouthfeel or textural traits expected more traditional products. In conclusion, some combinations of fat replacements that mimics the flavor, mouthfeel and textural characteristics of fat offer potential for further development of low-fat meat products to have similar characteristics of regular-fat counterparts.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.19-23
• /
• 2022

We have been developing a magnetic separation device that can be used in low magnetic fields for paramagnetic materials. Magnetic separation of paramagnetic particles with a small particle size is desired for volume reduction of contaminated soil in Fukushima or separation of iron scale from water supply system in power plants. However, the implementation of the system has been difficult due to the needed magnetic fields is high for paramagnetic materials. This is because there was a problem in installing such a magnet in the site. Therefore, we have developed a magnetic separation system that combines a selection tube and magnetic separation that can separate small sized paramagnetic particles in a low magnetic field. The selection tube is a technique for classifying the suspended particles by utilizing the phenomenon that the suspended particles come to rest when the gravity acting on the particles and the drag force are balanced when the suspension is flowed upward. In the balanced condition, they can be captured with even small magnetic forces. In this study, we calculated the particle size of paramagnetic particles trapped in a selection tube in a high gradient magnetic field. As a result, the combination of the selection tube and HGMS (High Gradient Magnetic Separation-system) can separate small sized paramagnetic particles under low magnetic field with high efficiency, and this paper shows its potential application.

• Korean Journal of Weed Science
• /
• v.18 no.2
• /
• pp.146-153
• /
• 1998

This experiment was conducted to clarify the characteristics of germination and emergence of Panicum dichotomiflorum which is a noxious weed species in direct-seeded rice field. P. dichotomiflorum was planted with several treatments such as different depths of irrigation to verifiy the ecological habits of seedling emergence and growth. In order to know the germination characteristics, Panicum dichotomiflorum seeds, pretreated with low-temperature($4^{\circ}C$) stratification for breaking the dormancy, were germinated under different temperature regimes and water potentials. Germination rates of P. dichotomiflorum was increased from 0% of dormant seed to 1%, 35% and 44% by stratification for 21, 28 and 42 days, respectively. Two dominant weed species in directseeded rice fields, Echinochloa crus-galli and Panicum dichotomitlorum, showed different germination habit under different temperature regimes. Echinochloa crus-galli showed more higher germination rate than Panicum dichotomiflorum at relatively low temperature regime(20/$10^{\circ}C$). Both species germinated faster at 30/$20^{\circ}C$ than at 20/$10^{\circ}C$. When the water potential was lowered, germination of Panicum dichotomiflorum was reduced more drastically than Echinochloa crus-galli. The critical water potential for germination of P. dichotomiflorum was -0.7MPa but Echinochloa crus-galli was affected slightly by the same water potential. The results showed that Echinochloa crus-galli can germinate under more wide range of soil water potential than Panicum dichotomiflorum. Emergence of P. dichotomiflorum was highly affected by irrigation depth and the level of water table. When the depth of irrigation water was increased, emergence of P. dichotomiflorum was dragged and emergence rate showed significant difference under the irrigation depth deeper than 6cm. The maximum depth of irrigation water for survival of Panicum dichotomiflorum seedling was 9cm.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.863-871
• /
• 2007

Spectroscopic characteristics of river water from four major watersheds in the Ulsan area were measured to examine their potential for estimating water quality parameters. The total 176 river samples were collected from 44 sites of small streams within the watersheds during the year 2006. Spectroscopic characteristics investigated included protein-like fluorescence (FLF) intensity, fulvic-like fluorescence (FLF) intensity, terrestrial humic-like fluorescence (TLF) intensity, UV absorbance at 254 nm, and UV absorbance difference at 220 nm and 254 nm. Protein-like fluorescence intensity showed linear relationships with biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorous (TP) concentrations of the samples with the correlation of 0.784, 0.779, and 0.733, respectively. Due to the UV absorption characteristics of nitrate at 220 nm, UV absorbance difference at 220 nm and 254 nm was selected to represent total nitrogen (TN) concentration. Exclusion of some samples with PLF intensity higher than 5.0 improved the correlation between the UV absorbance difference and TN as demonstrated by the increase of the correlation coefficient from 0.392 to 0.784. Instead, for the samples with PLF intensity lower than 5.0, the highest correlation of TN was achieved with UV absorbance at 254 nm. The results suggest that PLF intensity could be used as the estimation index for BOD, COD, and TP concentration of river water, and as the primary screening index for the prediction of TN using UV absorbance difference. Some BOD-based water quality levels among the river water were statistically discriminated by the PLF intensity. Low p-values were obtained from the t-tests on the samples with the first level and the second level (p=0.0003) and the samples with the second and the third levels (p=0.0413). Our combined results demonstrated that the selected spectroscopic characteristics of river water could be utilized as a tool for on-site real-time monitoring and/or the primary estimation of water quality.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.480-487
• /
• 2006

This study was conducted to improve the germination percent and germination speed by seed priming using polyethylene glycol (PEG) 8,000 solution on Acer mono seed because it has low and irregular germination characteristics. Seed priming was carried out under 0, -0.25, -0.5, -1.0 and -2.0 MPa of water potential at $20^{\circ}C$ for 3 days. Primed seeds showed higher percent germination, germination speed, mean germination time (MGT) and germination performance index (GPI) than unprimed seeds. Especially, primed seed with -2.0 MPa of water potential had the highest germination properties. And primed seeds had a lower dormancy than the unprimed seeds. Relative growth rate and T/R ratio of seedling from primed seeds were measured to survey the effect of seed priming on the seedling vigor as well as seed germination. The seedlings from primed seeds at -2.0 MPa of water potential showed the highest relative growth rates of height and root collar diameter, however, the lowest value in T/R ratio. This study suggested that seeds priming at -2.0 MPa of water potential under $20^{\circ}C$ for 3 days enhanced not only the percent germination, germination speed, MGT and GPI but also the vigor and growth of seedlings in Acer mono.

• Journal of the Korean Society of Safety
• /
• v.22 no.2 s.80
• /
• pp.41-46
• /
• 2007

This paper considers the electrical shock risk of the human body due to underwater leakage current in such places of public baths. Many submerged electric facilities in a public bath may create a severe electric shock hazard for the human body, since wet body in an accidentally energized bathtub can result in low electrical resistance through the human body for leakage or fault currents. Therefore a major consideration, in the context of electrical safety underwater, is the shock risk to the bather as a result of electric current flowing through the water in bathtub. To assess the electric shock risk and to analyze the potential distribution in a bathtub, 2 different situation cases are set up, then experimental and simulation methods are adopted. The validity of 2 cases of simulation and experiment data in a bathtub for electric distribution underwater are compared and analyzed. Also electric shock risk assessment underwater in a real public bathtub by simulation program package, Flux 3D, was conducted herein, and the results are presented and discussed.