• 한국수자원학회논문집
• /
• 제53권7호
• /
• pp.521-531
• /
• 2020

본 연구는 강우로부터 나타나는 표토침식과 퇴적의 영향을 고려하여 습지 훼손에 대한 정량적인 평가가 가능한 방안을 제시하고자 하였다. 용담댐 상류에 위치하고 있는 천천유역은 16개의 습지가 존재하며, 습지훼손 가능성에 대한 평가는 호수형습지와 소택지를 대상으로 이뤄졌다. 2002년, 2003년에 발생한 태풍사상을 적용한 결과, 벽남제습지의 경우 상류유역에서 유입되는 토사량은 저수용량의 2.30%(22,548 ㎥)로 가장 높았다. 산지영역에 위치하고 있는 소택지의 평균 유입토사량은 저수용량의 0.03%로 나타났으며 비교적 넓은 유역을 가지는 호수형습지보다 훼손가능성이 낮은 것으로 분석되었다. 넓은 면적이 농경지로 사용되고 있는 호수형습지는 모형의 결과에서 토사유입량이 높은 것으로 나타나 토양침식에 의한 습지훼손 가능성이 높을 것으로 판단된다.

• 한국환경보건학회지
• /
• 제32권6호
• /
• pp.539-542
• /
• 2006

The objective of this paper is to compare the applicability of assimilable organic carbon (AOC) or biodegradable dissolved organic carbon (BDOC) for quantifying biodegradable organic material (BOM) and bio-stability in distribution systems for a variety of finished waters. The study the data is derived from was part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different waters on distribution system water quality. Seven different finished waters were produced from surface, ground, or brackish water on site and fed 18 independent pilot distribution systems (PDSs), either as single finished water or as a blend of several finished waters. AOC and BDOC have often been used as indicators of bacterial regrowth potential in distribution systems. In this study, AOC was the more useful assay of the two for the BOM concentrations observed in the PDSs. BDOC did not distinguish BOM while AOC did at the low BOM levels from many of the advanced treatments (e.g. RO, $O^3/BAC$). AOC in contrast allowed much more meaningful calculations of the consumption or production of AOC as the blends passed through the PDSs even for very low BOM blends. In addition, meaningful trends corresponding to changes in heterophic plate count (HPC) were observed for AOC but not for BDOC. Moreover, AOC stability was associated with waters produced from advanced membrane treatment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.18-18
• /
• 2012

In Japan, about 67% of the land is covered by forests and about 41% of them consist of plantations. About 35% of the plantations consist of old-aged plantations of older than 50 yearsand the percentage is projected to 67% in ten years' time. Although the trees of these plantations are supposed to be cut for timber production, most of them remain unmanaged and thus overcrowded mainly due to declining domestic forest industry. Since the forests are mostly located in headwater watershed, there are growing concerns about the degradation of water resources by these unmanaged plantations. To understand the ecohydrological processes in these plantations and examine the effect of intensive 50-60 % thinning to increase infiltration rate and reduce overland flow and soil erosion by recovering understory vegetation, the JST-CREST project "Development of Innovative Technologies for Increasing in Watershed Runoff and Improving River Environment by the Management Practice of Devastated Forest Plantation (Representative: Yuichi Onda)" has been launched since 2009. The ultimate objective of this project is to provide potential scenario to enhance low flow discharge in drought period and reduce turbid material in high flow period. We have been conductingintensive field observation campaign in five research sites across Japan. In Fukuoka site, integrated ecohydrological observations have been conductedin two contrastive watersheds since 2010. Intensive 50% thinning was conducted from January to April 2012 and comparative studies of ecohydrological processes before and after thinning have been started. The interim results from all the sites of this project will be presented in the 3rd International Congress for Forest and Water in a Changing Environment held in Fukuoka during 18-20 September, 2012 (http://www.forest.kyushu-u.ac.jp/~ecohydrol/3ForestWater/index.html).

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.820-829
• /
• 2017

Vegetable oil dielectrics have been used in transformers as green alternatives to mineral insulating oils for about twenty years, because of their advantages of non-toxic, biodegradability, and renewability. However, the viscosity of vegetable oils is more than 3 times of mineral oils, which means a poor heat dissipation capacity. To get low-viscosity dielectrics, transesterification and purification were performed to prepare vegetable oil methyl esters in this study. Electrical and physical properties were determined to investigate their potential as dielectrics. The results showed that the methyl ester products had good dielectric strengths, high water saturation and enough fire resistance. The viscosities (at $40^{\circ}C$) were 0.2 times less than FR3 fluid, and 0.7 times less than mineral oil, which indicated superior cooling capacity as we expected. With the assistance of 0.5 wt% pour point depressants, canola oil methyl ester exhibited the lowest pour point ($-26^{\circ}C$) among the products which was lower than FR3 fluid ($-21^{\circ}C$) and 25# mineral oil ($-23^{\circ}C$). Thus, canola oil methyl ester was the best candidate as a low-viscosity vegetable oil-based dielectric. The low-viscosity fluid could extend the service life of transformers by its better cooling capacity compared with nature ester dielectrics.

• 한국축산식품학회지
• /
• 제22권4호
• /
• pp.363-372
• /
• 2002

Reducing the fat content of processed meat products can be performed by (1) using leaner raw meat materials (2) inducing non-meat ingredients that serve to replace a portion or all of the fat, and (3) applying new ingredient combinations, technologies or processing procedures that decrease the fat and cholesterol content of meat products. Low-fat meat products were manufactured with Int replacers which were food ingredients that had the functional and sensory properties of fat without contributing fat calories, resulting in lower fat(<3%) content. Added water, non-meat proteins, carbohydrates, such as starch and hydrocolloids(gums) and vegetable oils have been used as typical fat replacers to be used in meat products. In addition, fat substitutes included structural lipids, sucrose polyester and ingredient combinations. Formulations for the manufacture of low-fat meat products in combined with new technologies have focused on the use of fat replacer combinations that contributes a minimum of calories and not detrimental to flavor, juiciness, mouthfeel or textural traits expected more traditional products. In conclusion, some combinations of fat replacements that mimics the flavor, mouthfeel and textural characteristics of fat offer potential for further development of low-fat meat products to have similar characteristics of regular-fat counterparts.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.19-23
• /
• 2022

We have been developing a magnetic separation device that can be used in low magnetic fields for paramagnetic materials. Magnetic separation of paramagnetic particles with a small particle size is desired for volume reduction of contaminated soil in Fukushima or separation of iron scale from water supply system in power plants. However, the implementation of the system has been difficult due to the needed magnetic fields is high for paramagnetic materials. This is because there was a problem in installing such a magnet in the site. Therefore, we have developed a magnetic separation system that combines a selection tube and magnetic separation that can separate small sized paramagnetic particles in a low magnetic field. The selection tube is a technique for classifying the suspended particles by utilizing the phenomenon that the suspended particles come to rest when the gravity acting on the particles and the drag force are balanced when the suspension is flowed upward. In the balanced condition, they can be captured with even small magnetic forces. In this study, we calculated the particle size of paramagnetic particles trapped in a selection tube in a high gradient magnetic field. As a result, the combination of the selection tube and HGMS (High Gradient Magnetic Separation-system) can separate small sized paramagnetic particles under low magnetic field with high efficiency, and this paper shows its potential application.

• 한국잡초학회지
• /
• 제18권2호
• /
• pp.146-153
• /
• 1998

본(本) 실험(實驗)은 건답직파재배(乾畓直播栽培)시 문제가 되는 잡초(雜草) 중(中) 미국개기장의 발아(發芽)에 있어서 변온(變溫)과 저온층적처리(低溫層積處理)시 휴면타파(休眠打破) 후(後) 발아양상(發芽樣相), 수분(水分) 포텐셜 감소에 따른 발아(發芽)와 초기(初期) 생육(生育), 수위(水位)에 따른 출아(出芽) 양상(樣相)과 담수시(湛水時) 생존(生存)정도 등을 알아보았다. 1. 미국개기장을 각각 21, 28, 42일간 저온층적처리(低溫層積處理) 후(後)$25^{\circ}C/15^{\circ}C$의 변온(變溫)에서 발아율(發芽率)은 각각 1, 35, 44%였고, 발아속도(發芽速度)는 0.6, 24.4 30.0로서 6주 정도의 저온층적(低溫層積)으로 미국개기장의 휴면(休眠)이 많이 타파(打破)되었다. 2. 미국개기장과 돌피의 발아율(發芽率)은 변온(變溫)($30^{\circ}C/20^{\circ}C$)에서 97.6%와 94%였고, $20^{\circ}C/10^{\circ}C$에서는 34.6%와 90.4%였다. 발아속도(發芽速度)는 $30^{\circ}C/20^{\circ}C$에서는 77.3과 75.9였고, $20^{\circ}C/10^{\circ}C$에서는 27.3과 9.1로서 저온(低溫)에서 돌피가 미국개기장에 비해 발아(發芽)가 잘 되었다. 3. 수분(水分) 포텐셜 저하에 따라 발아율(發芽率)은 $30^{\circ}C$에서 미국개기장은 -0.3MPa에서는 88.7%였고, -0.6MPa 이후에 급속한 감소를 보였다. 돌피는 -0.8MPa까지는 87% 이상을 보이다가 -0.9MPa에서 급속한 감소를 보였다. $20^{\circ}C$에서는 돌피가 -0.7MPa이후 점차 감소하였고, 미국개기장은 발아(發芽) 적온(適溫) 이하의 온도(溫度) 영향으로 낮은 발아율(發芽率)을 보였다. $30^{\circ}C$에서 미국개기장은 0MPa에서는 유아장(幼芽長)과 유근장(幼根長)이 각각 1.47mm와 1.23cm였으나, -0.3MPa 이하는 유근장(幼根長)이 우세하였고, 돌피는 -0.6MPa는 유아장(幼芽長)이 길었으나 -0.7MPa 이하에서 유근장(幼根長)이 우세하였다. 4. 미국개기장은 수심(水深)이 깊어질수록 출현(出現) 개체수가 줄어들었는데, 6cm 이상의 수심(水深)에서 출현율(出現率)은 급격히 감소되었다. 담수후(湛水後) 생존율(生存率)은 수심 0cm와 3cm에서는 85.8%와 37.3%였고, 6cm와 9cm수심에서는 각각 15.1%와 18.2%로 급격한 감소를 보였다. 6, 9cm의 생존유묘수는 0cm에 비해 약 1/5로 감소하였고, 생존(生存) 개체(個體)의 생체중(生體重)과 건물중(乾物重)은 수면(水面)으로부터 3cm에서 9cm까지 점점 감소하는 경향을 띠었다.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.863-871
• /
• 2007

Spectroscopic characteristics of river water from four major watersheds in the Ulsan area were measured to examine their potential for estimating water quality parameters. The total 176 river samples were collected from 44 sites of small streams within the watersheds during the year 2006. Spectroscopic characteristics investigated included protein-like fluorescence (FLF) intensity, fulvic-like fluorescence (FLF) intensity, terrestrial humic-like fluorescence (TLF) intensity, UV absorbance at 254 nm, and UV absorbance difference at 220 nm and 254 nm. Protein-like fluorescence intensity showed linear relationships with biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorous (TP) concentrations of the samples with the correlation of 0.784, 0.779, and 0.733, respectively. Due to the UV absorption characteristics of nitrate at 220 nm, UV absorbance difference at 220 nm and 254 nm was selected to represent total nitrogen (TN) concentration. Exclusion of some samples with PLF intensity higher than 5.0 improved the correlation between the UV absorbance difference and TN as demonstrated by the increase of the correlation coefficient from 0.392 to 0.784. Instead, for the samples with PLF intensity lower than 5.0, the highest correlation of TN was achieved with UV absorbance at 254 nm. The results suggest that PLF intensity could be used as the estimation index for BOD, COD, and TP concentration of river water, and as the primary screening index for the prediction of TN using UV absorbance difference. Some BOD-based water quality levels among the river water were statistically discriminated by the PLF intensity. Low p-values were obtained from the t-tests on the samples with the first level and the second level (p=0.0003) and the samples with the second and the third levels (p=0.0413). Our combined results demonstrated that the selected spectroscopic characteristics of river water could be utilized as a tool for on-site real-time monitoring and/or the primary estimation of water quality.

• 한국자원식물학회지
• /
• 제19권4호
• /
• pp.480-487
• /
• 2006

본 연구는 발아율이 낮고 발아가 불균일할 뿐만 아니라 발아소요기간이 긴 고로쇠나무 종자의 발아율 및 발아속도를 향상시키고자 PEG를 이용한 priming 처리를 실시하였던 바 그 결과를 요약하면 다음과 같다. 수분퍼텐셜을 0, -0.25, -0.5, -1.0, -2.0MPa로 각각 조절한 PEG 용액에 3일 동안 침지시켜 priming 처리한 고로쇠나무 종자는 무처리구에 비해 priming 처리구에서 발아율, 평균발아일수, 발아속도 및 발아균일지수가 향상되었다. 특히, -2.0MPa 처리구에서는 가장 높은 효과를 나타내었다. 또한 priming 처리는 무처리구에 비해 휴면율이 낮게 나타나 휴면타파에 효과가 있음을 알 수 있었다. Priming 처리가 종자발아 뿐만 아니라 유묘활력에도 영향을 미치는지 알아보고자 priming 처리 후 발아된 종자로부터 생장한 유묘를 대상으로 상대생장율 및 T/R율을 조사한 결과 -2.0MPa 처리구의 유묘에서 상대생장율은 가장 높고 T/R율은 가장 낮은 것으로 관찰되었다. 이러한 결과로부터 -2.0MPa의 수분퍼텐셜에서 3일 동안 priming 처리하는 것이 고로쇠나무 종자에 있어 가장 합리적인 종자처리 방법이라 할 수 있었다.

• 한국안전학회지
• /
• 제22권2호
• /
• pp.41-46
• /
• 2007

This paper considers the electrical shock risk of the human body due to underwater leakage current in such places of public baths. Many submerged electric facilities in a public bath may create a severe electric shock hazard for the human body, since wet body in an accidentally energized bathtub can result in low electrical resistance through the human body for leakage or fault currents. Therefore a major consideration, in the context of electrical safety underwater, is the shock risk to the bather as a result of electric current flowing through the water in bathtub. To assess the electric shock risk and to analyze the potential distribution in a bathtub, 2 different situation cases are set up, then experimental and simulation methods are adopted. The validity of 2 cases of simulation and experiment data in a bathtub for electric distribution underwater are compared and analyzed. Also electric shock risk assessment underwater in a real public bathtub by simulation program package, Flux 3D, was conducted herein, and the results are presented and discussed.