• Korean Journal of Weed Science
• /
• v.15 no.3
• /
• pp.183-187
• /
• 1995

The germination characteristics of Diplachne fusca (L.) P. Beauv. seeds were investigated under different seed storage conditions to find out reliable system for maintaining the seeds with high and uniform germination rate and thus for possible use of the seeds in herbicide screening with a continuous seed supply. When the seeds were stored under wet-low temperature($4^{\circ}C$) condition, the germination rate was 88% after 4-week-storage. The germination rate slightly declined after the storage for longer than 3 months. Dry seeds stored at room temperature exhibited very low germination rate. The wet-low temperature treatment was effective for inducing the germination of the seeds which had been stored under dry-room temperature condition for 4 months. The germination rate was 70% after 2-week- storage under the wet-low temperature condition. The germination rate was much higher under an alternate temperature condition than under a continuous temperature condition. The optimum temperature was 35/$25^{\circ}C$(14/10hrs). The seeds had a capability to germinate under NaCl-treated condition even at a concentration of 1.0%, whereas the germination of Echinochloa crus-galli seeds was completely inhibited by 0.5% NaCl. This result indicates that D. fusca has an advantage over E. crus-galli to survive in reclaimed 1and from the sea.

• Korean Journal of Ichthyology
• /
• v.23 no.2
• /
• pp.145-149
• /
• 2011

We studied any variations of skin mucus cells of Misgurnus mizolepis caused by inducing a great change of water temperature including high temperature- and low temperature-adapted groups and then compared them with a control group of normal water condition. The high temperature-adapted group showed no significant different in size and number of the mucus cell (P>0.01), whereas in the low temperature-adapted group, the surface area of mucus cell layer and shape of its mucus cell, and the number of mucus cell remarkably increased in all the skin regions of dorsum, lateral region and occiput (P<0.01). Returned to the same condition as the control group, the low temperature-adapted groups showed the same features that appear in the normal water condition (P<0.01). Based on these results, the skin mucus cells of M. mizolepis seems to be very sensitive to cold water temperature and therefore they may play a key role in assessment of its environmental conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.164-169
• /
• 2009

The slip velocity and the temperature jumps for low-speed flow in microchannels are investigated using Langmuir slip boundary condition. This slip boundary condition is suggested to simulate micro flow. The current study analyzes Langmuir slip boundary condition theoretically and it analyzed numerically micro-Couette flow, micro-Poiseuille flow and grooved microchannel flow. First, to prove validity for Langmuir slip condition, an analytical solution for micro-Couette flow is derived from Navier-Stokes equations with Langmuir slip conditions and is compared with DSMC and an analytical solution with Maxwell slip boundary condition. Second, the numerical analysis is performed for micro-Poiseuille flow and grooved microchannel flow. The slip velocity and temperature distribution are compared with results of DSMC or Maxwell slip condition and those are shown in good agreement.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.62-70
• /
• 1996

We experimented on cutting characteristics-cutting force, behavior of cutting temperature, surface roughness. chip thickness under low temperature, which generated by liquid nitrogen(77K). The work-pieces were freezed to-195 .deg. C and liquid nitrogen was also sprinkled on cutting area in order to decrease an experimental error of machining in low temperature. The workpiece was became to -195 .deg. C in5 minutes. In cooled condition surface roughness of workpiece was better than normal condition. In addition, we investigated the possibility that surface roughness of workpiece and cutting force can be predicted analyzing cutting conditions by the trained neural network.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.2
• /
• pp.151-156
• /
• 2002

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods for resolve these problems is to reduce freezing temperature of concrete by the use of chemical admixture called Accelerators for freezing resistance. In this study, we investigate the effect on strength development of cement mortar using accelerators for freezing resistance with the variance curing condition. As the result of this study, the mortar using accelerators for freezing resistance show that continuously strength development in curing condition of -5$^{\circ}C$. And compressive strength under the variance temperature condition was higher than constant temperature condition in same maturity.

• Journal of the Korean Society of Combustion
• /
• v.10 no.4
• /
• pp.24-32
• /
• 2005

Various types of plasma source applied in $CH_4$ decomposition process are compared. DBD by pulse and AC power, spark by pulse and AC power, rotating arc and hollow cathode plasma are chosen to be compared. The results show that $CH_4$ conversion per given unit power is relatively high in hollow cathode plasma and rotating arc that induces rather high temperature condition and that is why both thermal dehydration and plasma induced decomposition contribute for the overall process. In case of DBD wherein high temperature electron and low temperature gas molecule coexist, the process shows low conversion rate, for in rather low temperature condition the contribution of thermal dehydration is lowered. Selectivity of $C_2H_6$ and $C_2H_2$ is shown to be a good parameter of the relative contribution of plasma chemistry in the overall process. From the results we concluded that required condition of plasma source for a cost effective and high yield $CH_4$ decomposition is to have characteristics of both thermal plasma and non thermal plasma in which temperature is high above a certain threshold state for thermal dehydration and electron induced collision is maximized in the same breath.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.370-378
• /
• 2015

Background : Aruncus dioicus var. kamtschaticus, functional wild vegetable, is perennial herb and young leaves with soft texture are generally used as edible food. So the demand for the vegetable has increased recently. This study was carried out to determine the effects of temperature and shading on germination characteristics of A. dioicus. Methods and Results : The experiment was performed by temperature and shading treatments. Seed pre-treatment before the germination experiment was carried out by the storage in low temperature ($4^{\circ}C$) under wet condition (LTW) for 0, 15, 30, 45 and 60 days and shading treatment were 35%, 50%, and 75% under control, BA (6-benzyladenine) and $GA_3$ (gibberellic acid) condition for 24 hours. Increasing the length of the storage periods led to increases seed germination percent in low temperature ($4^{\circ}C$) under wet condition (LTW), germination rate of A. dioicus seed was the highest at $15^{\circ}C$ with 60 days of seed pre-treatment. In the case of seeds pre-treatment with LTW, the more temperature went up, the more days to 50% of Germination of Final Germination Rate ($T_{50}$) went down. As a result of surveying shading treatment, germination rate was the highest in control of 35% shading and the next higher was in control of 50% shading. Conclusions : It is concluded that the temperature and shading are important factors to produce A. dioicus. Also, We suggest these results as basic data of A. dioicus for sexual propagation.

• Tribology and Lubricants
• /
• v.8 no.1
• /
• pp.48-55
• /
• 1992

The friction characteristic of plastics (PTFE, Nylon, Acetal and phenolic) was studied on the lubricated condition with a pin on disk machine. Mineral oil without additive (base oil) and water were used as liquid lubricants at the controlled temperature. From the experimental work, it was found out that the coefficient of friction of plastics was controlled by the mechanical properities of plastic more than that of liquid for various load and temperature. Viscosity of liquid has affected on the friction only at low temperature under lighb load. Among the tested plastics, the coefficient of friction of PTFE was the lowest under light load and at low temperature while Nylon at medium load and temperature, and Acetal at heavy load and high temperature. The coefficient of friction of soft plastics like PTFE and Nylon were increased as the load and temperature were increased, while that of hard plastic (Acetal) was decreased and that of thermo setting plastic (phenolic) was mixed. Also for soft plastics, the coefficient of friction under heavy load was always higher than that under light load, while hard plastic was vice versa.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.608-613
• /
• 2013

In this paper, the low-temperature sintering of $TiO_2$ is approached to solve the problem of high temperature sintering which decreases the interconnection between particles or between substrate and particle. $TiO_2$ paste is prepared with Titanium (IV) isopropoxide as the precursor material and calcinate at different conditions (low temperature). In the results, since the changing of temperature and time of sintering, crystalline phase do not change and the intensities of anatase, rutile phase are higher. At $110^{\circ}C$, 7 h sintering condition, crystalline size of anatase and rutile phase are the smallest which are 13.07 and 17.47 nm, respectively. In addition, the highest zeta potential is about 32.77 mV and the repulsive force increases thus leading to the best of the dispersion characteristics between $TiO_2$ particles. Futhermore, DSSCs at that condition exhibits the highest efficiency with the values of $V_{oc}$, $J_{sc}$, FF and ${\eta}$ are 0.69 V, $8.60mA\;cm^{-2}$, 67.93% and 4.06%, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.44-50
• /
• 2023

The Daehwangjam has excellent marketability and quality. However, precise silkworm breeding data on the recent high-temperature environment is not enough collected, and it is necessary to check whether stable Daewhangjam silkworm egg production was possible in poor environments. In this study, the timing of metamorphosis of the Daewhangjam parents Jam323 and Jam324 silkworms, in an optimal condition and a general condition similar to breeding grounds, was investigated to confirm that appropriate mating was achieved. Surprisingly, a number of female moths were discarded due to the metamorphosis of Jam324 female moths much earlier than Jam323 male moths in either an optimal or a general condition. To improve this, during the Jam324 female pupation period, the mild low-temperature of 15℃ was treated for the pupation period to delay the metamorphosis into female moths. Depending on the treatment period, the metamorphosis of the female pupa was delayed by more than 4 days, allowing normal mating with the Jam323 male moth. The eye pigments in a pupa also slowly accumulated in these treatments. In order to discover the side effects of low-temperature treatments, the voltinism of the Daewhangjam eggs was investigated, but most of them remained univoltine. Taken together, the low-temperature treatment during the female pupation period made it possible to use Jam324 female moths that were should be discarded, which means that stable and efficient management of Daewhangjam egg production is possible.