• Title/Summary/Keyword: low temperature and vacuum

검색결과 823건 처리시간 0.023초

Carbon nanotube field emission display

  • Chil, Won-Bong;Kim, Jong-Min
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제12권7호
    • /
    • pp.7-11
    • /
    • 1999
  • Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

  • PDF

저온진공건조 참치추출물의 in vitro 항암 및 항산화 효과 (In Vitro Anticancer and Antioxidant Effect of Solvent Extracts from Tuna Dried at Low Temperature Vacuum.)

  • 장주리;김경근;문수범;임선영
    • 생명과학회지
    • /
    • 제19권5호
    • /
    • pp.633-638
    • /
    • 2009
  • 저온 진공 공정으로 건조된 참치를 유기용매로 추출하여 이들 참치 추출물 및 분획물들에 의한 인체 결장암 및 섬유육종세포에 대한 증식 및 세포 내 활성산소종 억제 효과에 대해 검토하였다. 건조 참치의 A+M 추출물과 MeOH 추출물을 0.5, 1, 및 5 mg/ml의 농도로 인체 섬유육종세포(HT1080)에 처리했을 때 농도 의존적으로 인체 암세포 증식을 억제시켰으며(p<0.05), 특히 A+M 추출물이 MeOH 추출물에 비하여 그 억제효과가 우수하였다. 건조 참치 추출물로부터 얻어진 분획물들의 경우 특히 hexane과 85% aq. MeOH 분획물들에 의한 암세포 증식 억제효과가 높았다. 인체 결장암세포(HT-29)에 대한 결과로 A+M 추출물은 인체 섬유육종세포(HT1080)의 결과와 비교했을 때 다소 암세포 증식 억제 효과가 낮았으나 5 mg/ml의 첨가농도에서 95%로 암세포 증식 억제효과를 보였고(p<0.05), MeOH 추출물도 앞서 A+M 추출물 결과와 유사하게 인체 섬유육종세포(HT1080)에 비해 낮은 암세포 성장 억제효과를 보였지만, 첨가농도 5 mg/ml에서는 93%로 높은 암세포 증식 억제효과를 나타내었다(p<0.05). 건조 참치 분획물들의 경우도 앞서의 인체 섬유육종세포(HT1080)와 유사하게 모든 분획물들에서 농도 의존적으로 억제효과가 높은 것을 살펴 볼 수가 있었고, 인체 결장암세포(HT-29)에서도 hexane과 85% aq. MeOH 분획물에 의한 항암효과가 우수하였다. In vitro 항산화실험에서 건조 참치 A+M 추출물 및 MeOH 추출물을 농도별로 인체 섬유육종세포(HT1080)에 처리하였을 때 A+M 추출물(10 mg/ml 농도)를 제외하고 측정기간 120분 동안 모든 추출물들이 blank군과 control군에 비해 세포 내 활성산소종을 크게 감소시켰다. 건조 참치 분획물들 중 BuOH 및 85% aq. MeOH 분획물들은 세포내 활성산소종을 크게 감소시키는 우수한 항산화 효과를 나타내었다.

내부가열을 이용한 보장성어육(고등어) 연제품의 가공 및 제품개발에 관한 연구 1. 원료${\cdot}$첨가물의 배합 및 가공조건 (Processing of Water Activity Controlled Fish Meat Paste by Dielectric Heating 1. Formulation and Processing Conditions)

  • 이강호;이병호;유병진;서재수;조진호;정인학;제외권
    • 한국수산과학회지
    • /
    • 제17권5호
    • /
    • pp.353-360
    • /
    • 1984
  • 유전가열을 이용한 내부가열로서 어육연제품을 조리${\codt}$살균함과 동시에 내부수분을 확산${\codt}$이탈시켜 제품의 수분활성을 조절하여 상온보장이 가능한 보장성 어묵을 가공하는 방법과 제품개발을 위한 원료첨가물의 배합 및 가공조건을 검토한 실험결과를 요약하면 다음과 같다. (1) 고등어 연육의 첨가물 배합조건은 고기풀 100에 대하여 전분(옥수수 전분) $10\%$, 소금 $1.5%$, MSG $0.6\%$, sorbitol $3.0\%$, 설탕 $2.0\%$일 때가 가장 적당하였다. (2) 연제품의 형상과 크기는 두께 0.8cm, 직경 8cm의 원반형이 균일한 가열과 팽화 및 표면경화를 막는데 가장 적당하였고, 이것은 연육을 8cm 직경의 원주형으로 충전하여 이것을 열탕중에서 $2{\sim}3$분간 가열처리하여 gel시킨 후 0.8cm 두께로 절단하여 만들수 있으므로 조작이 매우 편리하였다. 동시에 열탕처리는 유전 가열시간을 단축시키는 효과도 있었다. (3) 유전가열은 $5{\sim}6$분간을 2분, $1{\codt}5$분, $1{\codt}5$분 및 1분씩으로 간헐적으로 행하는 것이 제품의 성상과 수분활성 조절 및 살균효과가 좋았다. 1단계 가열에 의하여 확산${\codt}$이탈된 수분은 $60^{\circ}C$, 3m/sec의 열풍으로 2분간 건조하고 계속적으로 600 W 전열기로 $5{\sim}6$분간 가열 표면배소와 함께 최종적으로 수분활성을 조절할 수 있었다. (4) (3)과 같은 조건으로 가공한 연제품은 수분활성 0.84{\sim}0.86, 생균수 $3{\times}10^2/g$이하, TI함량 27.6mg/g였고 texture 시험성적은 hardness 42, cohesiveness 0.53, toughness 4.6, elasticity 0.8, folding test AA였다. (5) 연제품의 일반성분 조성은 수분 $40.1\%$, 단백질 $20.8\%$, 지방 $17.4\%$, 탄수화물 $16.2\%$ 및 회분$5.5\%$였다.

  • PDF