• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.78-84
• /
• 2005

The development of eco-friendly low pressure carburizing system with high pressure gas quenching (LPC_GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2019

This study was conducted on a high-temperature/high-pressure washer in which low-pressure cold water in a boiler is heated to a temperature range of $70{\sim}80^{\circ}C$ by supplying diesel combustion heat. The high-temperature water is sent to a compressor to increase its pressure to 200 bar, thereby making high-temperature/high-pressure water, which is sprayed through a spray nozzle. In the results of this study, the spray temperature of the high-pressure washing was shown to be the highest when the ratio between the actual amount of combustible air and the theoretical amount of air was 1:1 and the energy consumption rate of the low-pressure boiler type high-pressure washer was shown to be much lower than that of the high-pressure boiler type high-pressure washer.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1018-1026
• /
• 2005

The proton exchange membrane (PEM) fuel cell system consisting of stack and balance of plant (BOP) was modeled in a MATLAB/Simulink environment. High-pressure operating (compressor type) and low-pressure operating (air blower type) fuel cell systems were con­sidered. The effects of two main operating parameters (humidity and the pressure of the supplied gas) on the power distribution characteristics of BOP and the net system efficiency of the two systems mentioned above were compared and discussed. The simulation determines an optimum condition regarding parameters such as the cathode air pressure and the relative humidity for maximum net system efficiency for the operating fuel cell systems. This study contributes to get a basic insight into the fuel cell stack and BOP component sizing. Further research using muli­object variable optimization packages and the approach developed by this study can effectively contribute to an operating strategy for the practical use of fuel cell systems for vehicles.

• 대한지리학회지
• /
• 제50권1호
• /
• pp.1-21
• /
• 2015

본 연구에서는 지난 40년 동안(1973~2012)의 우리나라 기상청 산하 61개 지점 일기온 자료와 NCEP/NCAR 재분석 자료를 바탕으로 우리나라 지역별 겨울철 극한저온현상 발생 시 동아시아 영역의 종관 기후 패턴의 특징을 밝히고자 하였다. 일최고기온과 일최저기온 하위 10 퍼센타일 기준으로 정의된 겨울철 극한저온현상은 주로 겨울철 전반기(12월 초순~1월 중순)에 2~7일 간격으로 우리나라 전역 또는 주요 산맥 기준 동서지역으로 구분되어 발생함을 알 수 있다. 해수면기압과 바람벡터 등의 지상 종관 자료 합성장 분석에 따르면 총 13개로 구분되는 우리나라 겨울철 극한저온현상 발생 공간 패턴은 산맥뿐만 아니라 시베리아 고기압과 알류샨 저기압의 상대적인 확장 범위와 강도와 밀접한 관련성이 있음을 알 수 있다. 대류권 중층(500 hPa) 종관기후도 분석에 따르면, 블러킹 형태의 저기압이 상층 찬 공기를 고위도 지역에서 한반도로 이류시킬 때 우리나라에 겨울철 극한저온현상이 발생하기에 적합한 조건이 형성됨을 알 수 있다. 이러한 결과들은 지역규모 이상의 동아시아 겨울철 극한저온현상 예보를 향상시키기 위해 시베리아 고기압, 알류샨 저기압, 상층 블러킹 등의 종관 기후 요소를 모니터링하는 것이 중요함을 가리킨다.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.75-84
• /
• 1994

In general direct-operated pressure reducing valves have been gardly applied to a dynamic control system such as active suspension control because of their poor control stability. But they are more robust than pilot-operated type and do not need pilot control flow. In this paper development of a new direct-operated proportional pressure reducing valve for low-band type active suspension control is reported. By means of a special damper directly linked to the valve spool, the control stability could be effectively improved without drawback in response time. The linearity error was less than $\pm$3.5%. Applied to an experimental active suspension system the new valve showed the $-90^{\circ}$ phase delay at 4Hz with 20% sinusoidal signal input and could control the suspension system with almost same performance as that with a pilot-operated type valve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.952-957
• /
• 2001

The objectives of this investigation were to obtain an excellent spray by cavitation under the low injection pressure. When cavitation occurs in the nozzle hole, the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle made the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the low injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured macroscope images of PMAS and the Sauter mean diameter was measured PDA system. To measure the pressure of the nozzle hole, pressure transducer was used. The results of this study indicated that enhanced atomization of the liquid jet at the low injection pressure was obtained by making the gap and installing the bypass at the single hole nozzle.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.516-520
• /
• 2010

튜브 구조물의 압력을 대기압 이하로 유지하는데에 사용될 진공 펌프의 용량을 설정하기 위한 파라메타 연구를 수행하였다. 최근 철도 기술 연구자들은 초고속 수송 시스템의 하나인 튜브 열차 시스템에 관심을 가지게 되었다. 초고속을 달성하기 위하여 튜브 내부를 저압으로 유지할 필요가 있는데, 저압에서는 공기 저항이 극단적으로 줄어들기 때문이다. 진공 펌프 시스템은 튜브 내부를 저압으로 만들고, 누설을 보충하는 역할을 한다. 일련의 연구결과, 다양한 파라메타에 대한 진공 펌프의 용량을 구하였다. 이 결과들은 공기 저항 저감 효과를 분석하는데에 적용될 것이다.

• 열처리공학회지
• /
• 제19권5호
• /
• pp.262-269
• /
• 2006

The development of eco-friendly low pressure carburizing system with high pressure gas quenching(LPC-GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.105-110
• /
• 2011

Through this study, the performance evaluation on the addition of low-pressure loop EGR(Exhaust Gas Recirculation) in a 6.0 L commercial diesel engine was carried out using WAVE modeling and simulation. Since the key technology of advanced diesel engine combustion such as low-temperature combustion is to steadily supply high rates of EGR in a wide operating range, the current study could be effectively contribute to the design and development processes of up-to-date diesel engine systems as real-world reference data. The current simulation results show that the system in which low-pressure loop EGR is added shows almost 2.3 times increase in maximum EGR rate at 1000 rpm as well as almost 1.6 times increase at 2200 and 1600 rpm in comparison with an engine system employing high-pressure loop EGR only. Also, both turbocharger axis speed and charging pressure level did not deteriorate due to the addition of low-pressure loop EGR at 2200 and 1000 rpm, but they were fairly decreased at 1600 rpm.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.21-27
• /
• 2009

Effective way of cooking oil fire extinguishment is using water mist system which has cooling and smothering effects. Low pressure water mist system has advantage because it is compatible with existing sprinkler systems. To increase the effectiveness of low pressure water mist system, additives can be used which increase the momentum of water particle and the chemical effect. In this experiment, aqueous film forming form(AFFF) agent is used as additive and the effect of additive concentration and water pressure are experimented. For the extinguishment of cooking oil fire such as soybean and olive oils, AFFF agent is effective and can decrease the fire extinguishing time and water consumption.