• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.197-204
• /
• 2011

Set-top Box which receives broadcasting signal and delivers it to display device such as TV usually doesn't have low-power mode, standby power mode. On the other side, most consumer electronics support standby power mode. The main reasons come from technical barriers and operational stability. Set-top box normally consumes 80~90% power of active mode even though turning off. This is much higher compared to other consumer electronics which consume less than 1W in standby power mode. However, most developed countries including Korea are enforcing the regulations which enhance energy efficiency of set-top box. This paper describes design and development of low-power set-top box. Key technologies are SoC supporting low-power mode, system hardware and software operating in separated power mode, and middleware managing the power with broadcasting system. Finally, we show energy saving expectation through development and proliferation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.626-628
• /
• 2004

This paper describes an 8-bit CMOS folding A/D converter for set-top box. Modular low-power, high-speed CMOS A/D converter for embedded systems aims at design techniques for low-power, high-speed A/D converter processed by the standard CMOS technology. The time-interleaved A/D converter or flash A/D converter are not suitable for the low-power applications. The two-step or multi-step flash A/D converters need a high-speed SHA, which represents a tough task in high-speed analog circuit design. On the other hand, the folding A/D converter is suitable for the low-power, high-speed applications(Embedded system). The simulation results illustrate a conversion rate of 40MSamples/s and a Power dissipation of 80mW(only analog block) at 2.5V supply voltage.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.135-142
• /
• 2011

This paper proposes a performance evaluation method for power consumption of set-top box (STB) stand-by mode transition schemes. A stand-by mode transition scheme characterizes the timing of mode transition. The timing of mode transition affects the duration of stand-by mode operation, and the power consumptions of STB as well. Recently a fast stand-by mode transition scheme (FMT) has been proposed based on user input for selecting the device to be connected to TV. In this paper, we evaluate power consumption of FMT and a conventional mode transition scheme. For the computation of the duration of stand-by mode operation, the user input events are modeled as Poisson process. Simulation results based on the modeling reveals that the proposed scheme is more effective in power saving than the conventional scheme by up to 30%.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.885-895
• /
• 2016

The lowest power mode (passive-standby mode) was proposed for reducing the power consumption of set-top boxes in a standby state when not receiving content. However, low-power set-top boxes equipped with the lowest power mode have been rarely commercialized because of their low-quality user experience. In the lowest power mode, they deactivates almost all of operational modules and processes, and thus require dozens of seconds for activation latency (that is, the latency for activating all modules of the set-top boxes in a standby state). They are not even updated in a standby state because they deactivate their network interfaces in a standby state. This paper proposes an adaptive standby mode scheduling method for improving the user experience of such boxes. Set-top boxes using the proposed method can analyze the activation pattern and find the frequently used time period (that is, when the set-top boxes are frequently activated). They prepare for their activation during this frequently used time period, thereby reducing the activation latency and enabling their update in a standby state.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.30-40
• /
• 2010

The hard disk is one of the most frequently used storage in IPTV sep-top box. It has large storage capacity and provides fast I/O speed compared to its price whereas it causes high power consumption due to mechanical characteristics of spindle motor. In order to play streaming data in the set-top box, spindle motor of hard disk keeps active mode and it causes high power consumption. In this paper, We propose an offset-buffering and multi-mode spin-down method to reduce power consumption for streaming data playback. The offset-buffering inspects the user's viewing pattern and performs buffering based on the analysis of viewing pattern. So, it can maintain the status of spindle motor as idle mode for long time. Besides, it can reduce power consumption by spinning down according to offset-buffer size. The experimental result shows that proposed offset-buffering and multi mode spin-down method is about 28.3% and 12.5% lower than the full-Buffering method in terms of the power consumption and spin-down frequency, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1493-1496
• /
• 2016

This paper proposes a system for reducing the standby power consumption in using the consumer electronic devices such as a television, a home theater, a set-top box, or a DVD player. The system is consisted of a flyback converter, monitoring circuits, a relay and a micro-processor. The proposed system can reduce the standby power consumption by disconnecting the AC input and the consumer devices can be turned on with a remote control. The proposed standby power system consumes the low power to receive the infrared signal from the remote controller. Furthermore, a electronic double layer capacitor is used to store the energy with high efficiency. The proposed power system can operate the 플라이백 converter to charge the electronic double layer capacitor and connect the AC input to the consumer electronic devices. The proposed power circuit can reduce the standby power consumption in AV devices without increasing the cost. The prototype is implemented to verify the system with the commercialized products.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.412-413
• /
• 2016

최근 그린IT가 주요 사업으로 급부상하면서 다양한 분야에서 소비전력 저감 관련 연구가 활발히 진행 중이다. 특히, 멀티미디어서비스 발전에 따라 '국내 셋톱박스가 2,000만대 이상 보급되었으나 미사용 대기시간에도 상당한 양의 전력을 소비하여 국가 전력 수급에 많은 영향을 주고 있어 이에 대한 해결방안이 시급히 요구되고 있는 상황이다. 방송 서비스 사업자는 방송 콘텐츠의 활용성 증대, H/W교체 주기 연장 및 소비전력 저감 등의 이점으로 인하여 저전력 모드를 지원하는 셋톱박스에 가상화 서비스 제공 기술을 적용하기 위한 방법을 또한 모색하고 있다. 본 논문은 셋톱박스의 발전 방향이 하이브리드화, 고기능/복합화 함으로써 소비전력이 더욱 증가하고 있으므로 셋톱박스의 소비전력 저감을 보장하고, 가상화 서비스를 제공하기 위한 고려사항과 에너지 효율성을 보장하는 방법을 제공한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.1-6
• /
• 2014

Companies almost don't use an integrated control system using expensive network system in multimedia like TV and DID, despite IP-Broadcasting and communication equipment have expanded rapidly. The proposed integrated TCU(terminal control unit) is a control device that supports TV power On/Off check and remote control, power control reservation function, TV channel change, a variety of interface supports of input/output AC power & Lan port, RS-232C and IR using existing IP network after there is installed the Wake-on -Lan in the set-top box. The TCU can control and monitor 24 hours unlike existing low-cost control system RF method. In existing control equipment markets without expandability and low price, the TCU development including 24 hours monitoring and automatic control functions is expected to secure a wide range of companies.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1058-1065
• /
• 2004

Embedded system is widely used in various applications from simple monitor to a set-top box with CPU, memory and hard disk drives. Specially, embedded OS is ported in moveable or small machinery since it ordinarily transmits multimedia data. In this paper, we propose Null copy scheme on the embedded linux system for multimedia service, which can reduce memory copy overhead from user address space to kernel one, and vice versa. Since embedded system for networked multimedia service has low level computing power as well as memory, the Null copy scheme can provide more improved QoS. Our image transmission experiment results on embedded linux target board(CPU utilization an Deadline miss rates) installed a web camera have shown that the proposed scheme can increase fast response and lower CPU overhead.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.399-404
• /
• 2002

Along the evolution of information and communication technologies, manufacturing embedded systems such as PDA (personal digital assistant), HPC (hand -held PC), settop box. and information appliance became realistic. And RTOS (real-time operating system) and filesystem have been played essential re]os within the embedded systems as well. For the filesystem of embedded systems, flash memory has been used extensively instead of traditional hard disk drives because of embedded system's requirements like portability, fast access time, and low power consumption. Other than these requirements, nonvolatile storage characteristic of flash memory is another reason for wide adoption in industry. However, there are some technical challenges to cope with to use the flash memory as an indispensable component of the embedded systems. These would be relatively slow cleaning time and the limited number of times to write-and-clean. In this paper, a new cleaning policy is proposed to overcome the problems mentioned above and relevant performance comparison results will be provided. Ranking cleaning policy(RCP) decides when and where to clean within the flash memory considering the cost of cleaning and the number of times of cleaning. This method will maximize not only the lifetime of flash memory but also the performance of access time and manageability. As a result of performance comparison, RCP has showed about 10 ~ 50% of performance evolution compared to traditional policies, Greedy and Cost-benefit methods, by write throughputs.