• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.149-154
• /
• 1999

Response Surface Methodology was applied for optimizing the processing parameters of ultrasound treatment in order to produce low-molecular alginate. The use of ultrasound significantly reduced viscosity of alginate solutions. Suggested parameters of ultrasound treatment for maximum reduction of alginate molecular weight were: specific intensity, 115.81 $W/cm^2$ at 20kHz frequency; treatment time, 35.55 min; temperature, $20.08^{\circ}C$; alginate concentration, $2.5\%$. Low-molecular alginate obtained by ultrasound had two peaks on Sepharose CL-6B gel filtration. The viscosities of control, fraction I, and fraction II at $0.1\%$ concentration and $25^{\circ}C$ were 3.07, 1.23, and 0.82cps, respectively. Molecular weights of control, fraction I, and fraction II alginates were 336,500, 70,400, and 52,800 daltons, and their solubilities were 3, 6, and $14\%$, respectively. The lower molecular weight of alginate, the lower the alcohol precipitation and the higher $Ca^{2+}$ ion binding capacities. Heavy metal ion binding capacities of alginates were high in the following order of Pb, Cd, Zn, and Co.

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1393-1398
• /
• 2015

In this study, we investigated the extraction condition of alginate from Laminaria japonica, the enzymatic degradation of the extracted alginate, and the inhibitory activity of the degraded alginate on the differentiation of 3T3-L1 preadipocytes. The optimal conditions for the efficient extraction, precipitation, and recovery of alginate from the brown seaweed L. japonica were 1% for Na₂CO₃ concentration, 80℃ for extraction temperature, and ethanol for precipitation solvent. In the enzymatic reaction for the production of low-molecular-weight alginate (LMWA) by using alginate lyase from Flavobacterium sp., the initial concentration of Laminaria alginate was 3%. The low-molecular-weight degree from alginate was independent with the enzyme concentration, and the optimal concentration of alginate lyase was found to be 5 unit/ml. Through the enzymatic reaction with 5 unit/ml of alginate lyase at 37℃ for 3 hr, the viscosity and molecular weight of LMWA were 4.5 cp and 307 kDa, respectively. Treatment with LMWA significantly suppressed the accumulation of lipid droplet and triglyceride in 3T3-L1 preadipocytes with a dose-dependent manner. Therefore, it seems that LMWA treatment could inhibit the differentiation of 3T3-L1 preadipocytes. These results indicate that LMWA or the degraded alginate produced by alginate lyase enzyme can be useful for the development of anti-obesity biosubstances.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.730-735
• /
• 2005

Possibility of using low-molecular weight alginate as a wall material for encapsulation of fish oil was investigated. Encapsulation yield increased with increasing calcium chloride concentration up to 5% and was maintained thereafter, whereas slightly increased with increasing sodium alginate concentration up to 1.25% and decreased dramatically thereafter; emulsifier concentration had no effect on encapsulation yield. Loading efficiency increased with increasing content of core material. Encapsulation yields of low- and high-molecular weight alginates were similar, indicating low-molecular weight alginate can be used as wall material for encapsulation of fish oil.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.399-408
• /
• 1998

The effect of low molecular alginates feeding on the cholesterol levels and fatty acid compositions of rat serum and liver lipid were investigated. After one week basal diet feeding, four week old Sprague-Dawley male rats were fed with water soluble and acid $\cdot$alkali soluble alginate extracted from sea mustard (Undaria pinnatifida) and giant kelp (Macrocystis pyrifera), and their low molecular alginates prepared by the HCl partial hydrolysis. The feeding efficiency of the alginate fed group was ranged in 0.37$\~$0.44, which was 0.03$\~$0.05 lower than that of the basal diet group. Also, there was much less increase of liver weight in the alginate fed group. The water soluble alginate showed more significant effect in reducing the total cholesterol, free cholesterol, LDL-cholesterol, triglyceride and phospholipid of serum and liver lipid than the acid$\cdot$alkali soluble alginate. The effect was much better with low molecular alginate (reducing effect by the low-molecularization : Water soluble alginate - serum lipid; total cholesterol $59\%$, free cholesterol $65\%$, LDL-cholesterol $96\%$, triglyceride $50\%$, and phospholipid $36\%$. liver lipid: total cholesterol $4\%$, free cholesterol $62\%$, LDL-cholesterol $44\%$, triglyceride $33\%$, and phospholipid $44\%$. acid$\cdot$alkali soluble alginate - serum lipid; total cholesterol $52\%$: free cholesterol $97\%$, LDL-cholesterol $78\%$ triglyceride $32\%$, and phospholipid $64\%$. liver lipid; total cholesterol $11\%$, free cholesterol $12\%$, LDL-cholesterol $10\%$, triglyceride $27\%$, and phospholipid $21\%$). The effect of low molecular alginate feeding on the fatty acid composition of serum and liver lipid reflects the remarkable increase of polyenoic acid, over $44\%$ in serum lipid and about $70\%$ in liver lipid, comparing to the cholesterol fed group. The overall results indicated that feeding of low molecular alginates improves physiological function of rats by changing the serum and liver lipid composition.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.583-588
• /
• 2003

Sulfated chitosan and sulfated sodium alginate were synthesized by sulfating reaction of low molecular chitosan and low molecular sodium alginate with SO$_3$-pyridine complex. When the weight ratio of SO$_3$-pyridine complex to polysaccharide was 1:5, the degrees of sulfation were the highest at 2.75 and 2.53 respectively. The anticoagulation effect was the highest when the molecular weight was 8.0${\times}$10$^3$ Da, and the anticoagulation activity was the highest at 91% of that of heparin when sulfated chitosan and sulfated sodium alginate were mixed at a weight ratio of 1:1. The anticoagulation activity was highest at 84% of that of heparin in the active plastin trombo test (aPTT) when sulfated chitosan and sulfated sodium alginate were mixed at a weight ratio of 1:1.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.557-565
• /
• 2014

Sodium alginate and chitosan are added to a $CaCl_2$ solution to prepare calcium-alginate-chitosan and calciumalginate gels. After dehydration through stoving, two types of adsorbent particles are obtained. The adsorption process of the particles obtained for low concentrations of $Sr^{2+}$ satisfies a second-order kinetic equation and the Freundlich adsorption model. The thermodynamic behaviors of the particles indicate that adsorption occurs via a spontaneous physical process. XPS pattern analysis is used to demonstrate the adsorption of $Sr^{2+}$ by calcium alginate and chitosan. By building an interaction model of the molecules of chitosan and alginate with $Ca^{2+}$ and $Sr^{2+}$ to calculate energy parameters, Fukui index, Mulliken charge, and Mulliken population, adsorption of $Sr^{2+}$ on the molecular chains of chitosan as well as the boundary of calcium-alginate-chitosan is observed to show weak stability; by contrast, adsorption between molecular chains is high.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.325-330
• /
• 2000

Alginate obtained from brown algae had various physicochemical and rheological properties and could used as a dietary fiber, However, alginate has not been widely applied to the food industry, since it had high viscosity, high gelling effect conjugated with some mineral, and low solubility. To improve functionality of alginate, partially develymerized alginates, which was water-soluble dietary fiber were obtained by hydrolysis of alginate from the sea tangle, Laminaria japonicus, heated at $121^{\circ}C$. Effects of depolymerization of alginate on the changes of viscosity and average molecular weight, block composition ratio of mannuronate to guluronate (M/G ratio), chemical properties using $PT-IR, ^1H-NMR, and ^(13)C-NMR$ spectrum were investigated. The average molecular weight and viscosity of the alginate were rapidly decreased with the thermal decomposition, and estimated to be 1,307,415 dalton and 284,000 cps, before heating, 728,106 and 3,940.29 cps after 30 min heating, 102,635 and 22.22 cps after 2.5 hrs heating, 51,205 and 12.05 cps after 3 hrs, and 10,049 and 4.28 cps after 6.5 hrs, respectively. The M/G ratio was increased with the heating time, while MM-block did not show any changes and GG-block diminished. The results of $FT-IR, ^1H-NMR and ^(13)C-NMR$ spectrum suggested that changes of molecular structure did not occur by the thermal decomposition.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.608-611
• /
• 2000

To separate chitosanoligosaccharides easily by size exclusion, an coencapsulating technology of substrate and enzyme was developed. Chitosan and chitosanase were enveloped in this membrane and the product released to medium by size exclusion. The lower limit of the alginate concentration and the agitation speed were 0.5% and 40 rpm, respectively. Membrane thickness and capsules diameter were $10{\mu}m$ and approx. 3.0mm, 1.5mm, respectively. The molecular weight difference by concentration and cps of alginate were of little significance. And also, the molecular weight of distribution according to enzyme concentration was low concentration of enzyme produced high molecular weight of oligosaccharides. At 1.5mm size of capsule, product diffusion rate to outer part was higher than other capsules. The molecular weight distribution of the released oligosaccharides ranged from 1000 to 6000 Da.

• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.111-115
• /
• 2007

To modify the physical properties of alginate film, the gamma ray irradiation was performed, and alginate film properties such as elongation strength (ES), elongation rate (ER), water vapor permeability(WVP), and water solubility (WS) were measured. The film made from 1.75% alginate solution (w/w) with the addition of 2% CaCl$_2$ solution suggested a good application for a film preparation in that elongation strength(ES) increased 5 fold by CaCl$_2$ treatment and water vapor permeability was decreased by 17${\sim}$22%. A solid form of alginates were irradiated with Co$^{60}$ gamma rays in the dose range of 2 to 10 kGy to make a low molecular weight alginate film, and then the intrinsic viscosity and the molecular weight of alginates were measured. Increasing the dose range of 2 to 10 kGy produced lower intrinsic viscosity and lower molecular weight, causing the decrease in the ES and WS. However, ER increased four times compared to that of without gamma ray dose, which is an indication of the different properties of algiante film. WVP of the films did not show any significant change at different doses.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.444-450
• /
• 2011

A high molecular weight natural sodium alginate (HMWSAs) was depolymerized by hydrogen peroxide ($H_2O_2$) with ultrasonic irradiation. The effects of the reaction conditions such as reaction temperature, reaction time, hydrogen peroxide concentration and ultrasonic irradiation time on the molecular weights and the end groups of the depolymerized alginates were investigated. It was revealed that depolymerization occurred through the breakage of 1,4-glycosidic bonds of sodium alginate and the formation of formate groups on the main chain under certain conditions. The changes in molecular weight were monitored by GPC-MALS. The molecular weight of 2 wt% alginate solution decreased from 450 to 15.9 kDa for 0.5 hrs at 50 $^{\circ}C$ under an appropriate ultrasonic irradiation. The PDI(polydispersity index)s of the alginate depolymerized in this study were considerably narrow in comparison with those obtained from the other chemical degradation method. The PDIs were in the range of 1.5~2.5 in any reaction conditions employed in this study.