• Journal of Oral Medicine and Pain
• /
• 제35권1호
• /
• pp.31-39
• /
• 2010

치주염이나 구취발생과 관련된 구강미생물에 대한 저출력레이저의 살균효과를 관찰하기 위하여, Porphyromonas gingivalis 2561 (P. gingivalis 2561), Prevotella intermedia (Pr. intermedia)에 광감수성증가물질을 처리함으로써 실험균주의 광민감성을 증가시킨 후 저출력레이저 650nm의 파장을 연속적으로 1분, 2분, 3분, 5분간, 각각 1cm, 2cm, 3cm 거리에서 조사하여 다음과 같은 결과를 얻었다. 1. P. gingivalis 2561의 경우 Toluidine blue O(TBO) 처리 후 650nm의 파장으로 3cm의 거리에서 1분간 조사한 실험군은 TBO만 처리한 실험대조군에 비해 99.99% 이상의 항균효과를 나타내었다. 2. Pr. intermedia의 경우 TBO 처리 후 650 nm의 파장으로 3 cm의 거리에서 1분간 조사한 실험군은 TBO만 처리한 실험대조군에 비해 99.8% 이상의 항균효과를 나타내었다. 3. P. gingivalis 2561의 경우 TBO 처리 후 650 nm의 파장을 연속으로 각각 1분, 2분, 3분간 조사한 실험군의 경우 시간이 길어질수록 살균효과가 점차 증가되었다. 4. P. gingivalis 2561의 경우 조사거리가 1 cm, 2 cm, 3 cm으로 증가할수록 살균효과가 약간 감소되었다. 5. Pr. intermedia의 경우 조사거리가 1 cm, 2 cm, 3 cm으로 증가할수록 살균효과가 약간 감소되었다. 위와 같은 결과를 바탕으로 저출력레이저의 살균효과는 조사시간이 길어질수록, 조사거리가 짧을수록 살균효과가 증가되었는데, 살균효과가 가장 적게 나타난 3 cm의 거리에서 1분간 조사한 실험군에서도 TBO만 처리한 경우보다 99.8% 이상의 살균효과를 나타내었으므로 저출력레이저의 구강미생물에 대한 살균효과는 명백하다고 생각된다. 따라서 photosensitizer의 부작용이 없는 한계 내에서 사용한다면 저출력레이저가 치주염, 임플란트주위염 등에 대한 보조적 치료와 구취조절 등에 매우 유용하게 사용되리라고 생각된다.

• 한국입자에어로졸학회지
• /
• 제16권2호
• /
• pp.49-59
• /
• 2020

Various devices have been developed to the measurement of particulate matter pollutants, and Optical Particle Counter (OPC) that can be easily and quickly measured is widely used lately. The measured value by OPC is converted to weight concentration using the correction factor (CF). The calculation of CF is very important to improve the reliability and accuracy of OPC. In this study, the CF calculation study of light scattering laser photometer (model 8533, TSI) was carried out to measure in the atmospheric environment using 2 gravimetric devices and 3 light scattering laser photometer devices. Regression analysis and Tukey tests were used to significance the test of measurement devices. Measurements were carried out twice. There was a comparative analysis of measurement data between light scattering laser photometer and gravimetric devices in 1st measurement, and then the Evaluation of PM2.5 concentration corrected by CF performed in 2nd measurement. As a result of the significance analysis between light scattering laser photometer and gravimetric devices, the correlation between the same method was high, but the correlation between different methods was low. CF was calculated as 0.4258 based on the measurement results, and it is a similar level to previous studies at home and abroad. It is expected that these results can be used as basic data in the future study for air quality measurement research using light scattering laser photometer. Also, in order to improve the accuracy of the measurement techniques and the development of technology in the atmospheric environment, CF calculation research should be conducted continuously.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.240-240
• /
• 2009

We developed the low level laser therapy(LLLT) apparatus for external injury cure using a GaAsP Diode. This equipment was fabricated by using GaAsP diode and a microcontroller, and designed to enable us to control light irradiation timer, and frequency. In this paper, the designed device was used to find out how GaAsP diode light source affects the skin wound of RAT. In the experiment, $1cm^2$ wounds on the External injury of RAT were made. Light irradiation RAT and none light irradiation RAT divided, each RAT was irradiated 20 min a day for 9 days. In result, compared with none light irradiation RAT, the lower incidence of inflammation and faster recovery was shown in light irradiation RAT.

• Journal of Oral Medicine and Pain
• /
• 제42권3호
• /
• pp.53-61
• /
• 2017

Myogenous temporomandibular disorder is a collective term for pathologic conditions of the masticatory muscles, mainly characterized by pain and dysfunction associated with various pathophysiological processes. Among the subtypes of myogenous temporomandibular disorder, myofascial pain is one of the most common muscle disorders, characterized by the presence of trigger points (TrPs). Various modalities, such as ultrasound, manipulative therapy, spray-and-stretch technique, transcutaneous electrical nerve stimulation, injection/dry needling, and low-level laser therapy are used to inactivate TrPs. Needling/injection on the TrPs is one of the most common treatments for myofascial pain. Despite the evidence, there is continued controversy over defining the biological and clinical characteristics of TrPs and the efficacy of injection/dry needling. This review discusses the current concept of injection/needling to relieve TrPs.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.732-736
• /
• 2002

The introduction of newly developed intelligent and user-friendly robotics has opened a new era in shipbuilding. Together with traditional and low-cost mechanization a record level of welding automation rate has been achieved in the construction of cruise vessels. In the paper modem applications and recent developments of welding automation and robotics in shipbuilding have been described and some forecast for the future trends are given. Development in the field of shipyards will be continued with accelerated speed and we shall have interesting prospects for the near future. New laser techniques can boost the shipyards in a revolutional way when production is rapidly changing, materials will be lighter and quality demands are becoming more strict.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.961-966
• /
• 2001

Micro fans of randomly swept-blades were designed to provide C.P.U. in a personal computer with effective cooling in a very quiet mode. The proto--type axial micro-fans machined by a laser sintering machine were tested against manufactured products by comparing the performance and overall sound pressure level with spectral measurements in an environment suggested by ASHRAE and ANSI standards. The predicted OSPLs and directivity patterns of fans by iDesignFan software were in good agreements with measured data. The newly introduced fans of randomly swept-blades were proved to provide a very promising mode of low noise at small loading conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1303-1310
• /
• 2000

GPS carrier phase is supposed to provide the tool for the most precise 3 dimensional positioning information. The FAST, an OTF technique, has been developed by the GPS System Laboratory of Konkuk University, and has been shown several millimeter level accuracy in root-mean-square sense. This OTF's high precision positioning capability provides an adequate tool of low frequency vibration monitoring of large structures. In this paper, the possibility of vibration measurement of a cantilever beam using FAST has been tested, which is supposed to be extended to more practical applications. The results of the experiment have been compared with those by a strain gage and laser sensor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.218-224
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy low residual stresses and superb optical properties In the present study polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence regarded as one of the most important optical properties for optical disk is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the value of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.381-387
• /
• 2003

가압 경수로 사용후핵연료봉을 재처리하는 과정에서 발생되는 hull은 고준위 방사성폐기물로 분류되고 있다. 본 논문에서는 연소도 32,000MWd/tU, 냉각기간 15년(고리 1호기 cycle 4-7)인 PWR 사용후핵연료의 건식처리 공정에서 발생한 hull에 대하여 방사능적 특성 실험을 수행하였고, 문헌 조사 및 관련 코드의 계산을 통하여 가압 경수로 사용후핵연료 hull에 대한 방사화학적 특성을 조사하였다. 이를 토대로 hull에 부착되어 있는 핵물질을 레이저 또는 플라즈마 등의 건식 방법으로 제거함으로써 hull의 방사능을 저감시켜 중저준위 폐기물화하는 방안을 제시하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.106-106
• /
• 2022

An appropriate amount of nitrogen fertilizer input during rice cultivation is essential for rice growth, quality control, and reduction of greenhouse gases in paddy fields. Therefore, it is necessary to develop a technology that can check whether an appropriate amount of fertilizer is applied in paddy fields. In this study, we tried to derive a method for diagnosing nitrogen fertilization level using spectroscopic diagnosis, physiological analysis, and molecular indicator genes. Nitrogen fertilization treatment was performed in a greenhouse by dividing into five treatment conditions: no fertilization (N0), low fertilization (N0.5), standard fertilization (N1.0), excessive fertilization (N1.5), and double fertilization (N2.0), respectively. Growth characteristics analysis was investigated by nitrogen fertilization conditions and growth stages, and the height of the canopy was analyzed using a laser scanner. Physiological and spectroscopic analyses were performed by analyzing chlorophyll and sugar contents and measuring SPAD and leaf spectrometer on rice leaves. In addition, real-time PCR experiment was performed to check the relative expression levels of several known nitrogen metabolism related genes. These results suggest that spectroscopic techniques can be helpful in diagnosing the level of nitrogen fertilization in rice paddy fields.