• Korean Journal of Acupuncture
• /
• 제24권3호
• /
• pp.91-103
• /
• 2007

Objectives : The purpose of this study was to investigate the usability of live blood analysis on interior and exterior vascular laser irradiation therapy. Methods : We had analyzed the changing forms of the live blood sample with microscope before and after vascular laser irradiation therapy of blood. The live blood analysis was operated on Rouleau of red cell, erythrocyte aggregation, thrombocyte aggregation, uric acid crystals, red crystals, protoplasts. First, we analyzed all patients on each item, then did same thing classified two groups, Interior and exterior. Results : Rouleau of red cell, erythrocyte aggregation, thrombocyte aggregation, uric acid crystals, red crystals, protoplasts were decreased significantly, after interior and exterior aggregation, uric acid crystals. Interior vascular laser irradiation therapy was more effective than interior on Rouleau of red cell, erythrocyte aggregation, thrombocyte aggregation, uric acid crystals. Interior vascular laser irradiation therapy was more effective than exterior on red crystals, protoplasts. Conclusions : This study suggests that live blood analysis has the usability on vascular laser irradiation therapy. Then according to interior and exterior vascular laser irradiation therapy, the result has some different on each item. So it is better that choose the method, interior or exterior, for more effective therapy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.349-350
• /
• 2006

In this module, RED Light Emitting Diode was employed to replace for Low level He-Ne laser for medical applications Each experiment was performed to irradiation group and non-irradiation group for both Dog bone marrow and Rat tissue cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of 37% on Dog bone marrow, 23% on Rat tissue cells was verified m irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

• 대한치과의사협회지
• /
• 제54권12호
• /
• pp.985-995
• /
• 2016

Titanium (Ti) has been widely used for dental implant due to great biocompatibility and bonding ability against natural alveolar bone. A lot of titanium surface modification has been introduced in dentistry and, among them, methods to introduce micro/nano-roughened surface were considered as clinically approved strategy for accelerating osseointegration of Ti dental implant. To have synergetic effect with topography oriented favors in cell attachment, chair-side surface treatment with reproducibility of micro/nano-topography is introduced as next strategy to further enhance cellular functionalities. Extensive research has been investigated to study the potential of micro/nano-topography preserved chair-side surface treatment for Ti dental implant. This review will discuss ultraviolet, low level of laser therapy and non-thermal atmospheric pressure plasma on Ti dental implant with micro/nano-topography as next generation of surface treatment due to its abilities to induce super-hydrophilicity or biofunctionality without change of topographical cues.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.244-251
• /
• 2020

Objective: Physical therapy techniques are required for patients with temporomandibular joint disorder (TMD), but the effects of treatment have not been compared. Therefore, effects of transcutaneous electrical nerve stimulation (TENS) and low level laser (LLL), which are most commonly used interventions, were compared. Design: Randomized controlled trial. Methods: Thirty-six participants with pain in the temporomandibular joint were enrolled, and 12 participants were randomly assigned to either the TENS group, LLL group, or placebo group. Each intervention was performed for a total of 6 sessions for 2 weeks. For the evaluation of the participants, the mouth opening (MO), pressure pain threshold (PPT), and stress were measured at three time periods: baseline, post-test, and follow-up at 2 weeks. Results: Significant interaction between groups according to each evaluation point was found only in PPT-masseter (p<0.05). The evaluation time point at which a significant difference appeared was at the post-test and follow-up at 2 weeks time periods. As a result of the post-test, the LLL group showed a significant improvement compared to the TENS group (p<0.05), and at 2 weeks follow-up, the TENS group showed a significant improvement compared to the placebo group (p<0.05). Conclusions: In this study, an experiment was conducted to compare the treatment effects when TENS, LLL, and placebo were given to patients with TMD. In addition, by quantitatively presenting the effect size of each treatment, this study suggests clinical use of TENS and LLL treatment for TMD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1511-1513
• /
• 1999

In order to investigate the properties of diamond-like carbon(DLC) thin films depending on the deposition parameters, DLC thin films were systematically fabricated by pulsed laser deposition (PLD), DLC thin films have been shown advantageous field emission properties due to a negative electron affinity (NEA) and a low work function. At the atomic level. DLC is referred to the group of carbon materials with strong chemical bonding composition of $sp^2$ and $sp^3$ arrangements of atoms incorporated with an amorphous structure. The experiment was performed at substrate temperature in the range of room temperature to $600^{\circ}C$. The laser energy densiy was used to be in the range of $6J/cm^2$ to $20J/cm^2$, SEM, Raman, PL, XPS and field emission characteristics were used to investigate the DLC thin films.

• KSTLE International Journal
• /
• 제3권2호
• /
• pp.114-118
• /
• 2002

In this work, head-disk interactions are studied when flying height becomes lower than laser bump height on the landing zone of a disk. With the reduction of the spinning speed in a spin stand, the flying height is decreased under the height of laser bumps. Conventional and padded pico sliders sweep between landing Bone and data zone and, then, the dynamic behavior of the pico sliders and head-disk impacts are investigated using AE and stiction/friction signals. After 200n cycle-sweep tests, bearing analysis and AFM analysis indicate that there are some signs of wear and plastic deformation in the landing zone of a disk, although AE and stiction/friction signals are not significantly changed during the sweep tests. The experimental results of this paper suggest that in CSS tests at component level, more rigorous examination methods of wear and plastic deformation might be necessary as flying height becomes getting lower.

• Medical Lasers
• /
• 제9권2호
• /
• pp.95-102
• /
• 2020

Phototherapy has a profound immunosuppressive effect and is widely used for the treatment of inflammatory skin diseases. Since allergic rhinitis (AR) shares several common pathologic features with atopic dermatitis, intranasal phototherapy is a novel approach for treating AR. Phototherapy reduces the antigen presenting capacity of dendritic cells, induces apoptosis of immune cells, and inhibits synthesis and release of pro-inflammatory mediators from inflammatory cells. The effectiveness of phototherapy for AR has been extensively researched: from in vitro studies to several clinical trials. Data indicates the potential of intranasal phototherapy as an alternative treatment for AR as well as other inflammatory mucosal diseases. In this review, we introduce the in vitro, in vivo studies, and clinical trials which demonstrated the effect of phototherapy on AR.

• Journal of Welding and Joining
• /
• 제26권1호
• /
• pp.69-75
• /
• 2008

Spot welding which use the main process for side block production of stainless steel railway vehicle is legged behind in laser welding about a quality and productivity. Although the laser welding has many potential advantages such as low heat input and aspect ratio of weld bead, its application to a new structural component still is required many engineering data including mechanical properties such as tensile, fatigue strength, etc on. Therefore, experimental analysis was carried out to understand the fatigue phenomena of different thickness stainless steel overlap joining panels by Nd:YAG laser welding. The fatigue life curves were obtained through fatigue tests with the various levels of applied load. The fatigue life is related with the parameters such as gap size and penetration depth through experiment. As the results, tensile strength and fatigue life were proportional in heat input level and gap was identified the major factor for fatigue life. Also we could know that deferent a-ferrite content at HAZ depend on welding heat input was important factor to determine a formation of initial crack and total fatigue life cycle.

• The Journal of Korean Physical Therapy
• /
• 제9권1호
• /
• pp.157-166
• /
• 1997

The purpose of this study was to determine the effects of laser Irradiation on Human plasma $\beta-endorphin$ levels, by treating with low level helium-neon (He-Ne) and Infrared(lR) laser. The Laser was fixed frequency of 2400Hz by continuous scanning and irradiating time was 8 minutes each point. Blood samples were taken at before, after, after 15min's treatment and Plasma $\beta-endorphin$ was measured by radioimmunoassay. The samples for this study were 6 normal subjects(3male, 3female). The data were analyzed by paired t-test, one-way ANOVA and simple regression. The results of this study were as follows : 1. The human plasma $\beta-endorphin$ levels were noted as significant increase in after-treatment $(22.84{\pm}10.63pg/ml)$ as compared with before-treatment $(16.96{\pm}9.23pg/ml)$ and significant increase in after 15min's $(27.27{\pm}8.81pg/ml)$ as compared with after-treatment (p<0.05). 2. There were no significant changes in plasma g-endorphin levels between male and female. 3. The human plasma $\beta-endorphin$ levels were high associated in between session reliability (p<0.05).

• 한국분무공학회지
• /
• 제2권4호
• /
• pp.7-14
• /
• 1997

Laser Raman scattering method has been applied to measure equivalence ratio of methane/air mixture in injected spray. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity signal. Raman shifts and Raman scattering cross -sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ are measured precisely. Our results show an excellent agreement with those of other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air shows that $O_2:N_2=0.206:0.794$. We used gas injector which was operated at 1 bar. Methane is used as a fuel. Spray region is $10mm\times37mm$ and this region is divided into 80 points. In Raman signals are obtained and ensemble averaged for each point. 3-d and contour plot of distribution of equuivalence ratio is presented. Our measured results show that the equivalence ratio of methane/air mixture in methane-rich region is reasonable. However, more study is necessary for methane-lean region because background noise level is almost same as Raman intensity of methane.