• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.3
• /
• pp.192-199
• /
• 1999

During start up and shut down, the generator is rotating at a low speed and copper dusts cause arcing between the turns in the slot. Shorted turns occurred primarily by the movement of these copper dusts between individual windings in the generator rotor. Detection of shorted turns was performed in five gas turbine generators in two combined cycle power plants. Two types of permanent and temporary flux probes were used in this paper. These flux probes have been used to develop a methodology for detecting shorted turns in an operating generator's rotor. The flux probes sense the rotor winding slot leakage flux and produce a voltage proportional to the rate of change of the flux. This pattern of flux variation is the signature unique to each rotor winding. An appropriate waveform analysis technique canidentify the pole location, the slot number, and the number of shorted turns within each slot. Shorted turns in field winding of gas turbine generator(125.7 MVA) were detected to twelve turns on al total 190 turns.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.4
• /
• pp.152-160
• /
• 1999

A high speed motor has been generating a lot of attention due to its performance-more light, thin, short, compact than ordinary motors. But they have low efficiency with high frequency power source because of the iron losses which may produce too much heat as well as the copper losses occurred in the rotor windings. The Halbach array can generate the strong magnetic field systems without additional magnetic materials, therefore the iron losses can be removed. In this paper, the Halbach array is applied to the field system for the high speed motor, and three dimensional FEM is used to analyze the field of the Halbach array considering with the leakage flux. The measured values of flux density are also compared with the FEM analysis. And the magnetic characteristics of the Halbach array field system are compared with those of the conventional field systems such as slot-iron type, PM-iron type. Consequently, it is confirmed that the Halbach array field system is more suitable to the high speed motor because it has high flux density, sinusoidal flux distribution than others.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.13-17
• /
• 2000

The electrical properties of polyimide for interlayer dielectric applications are investigated with ECR (Electron Cyclotron Resonance) etching process. ECR etching with $Cl_2$-based plasma, generally used for aluminum etching, results in an increase in the dielectric constant of polyimide, while $SF_{6}$ plasma exhibits a high polyimide etch rate and a reducing effect of the dielectric constant. The leakage current of the polyimide is significantly suppressed after plasma exposure. Combination of Al etching with $Cl_2$plasma and polyimide etching with $SF_{6}$ plasma is expected as a good tool for realizing the multilevel metallization structures.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.5-14
• /
• 2006

A lot of parts in FGD (Flue Gas Desulphurization) systems of fossil-fuel power plants show the environments in which are highly changeable and extremely acidic corrosive medium according to time and locations, e.g. in duct works, coolers and re-heaters etc.. These conditions are formed when system materials are immersed in fluid that flows on them or when exhausted gas is condensed into thin layered medium to contact materials of the system walls and roofs. The environments make troublesome corrosion and air pollution problems that are occurred from the leakage of the condensed solution. The frequent shut-down and repairing works of FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, even the super alloys and Teflon linings sometimes have not been good enough to preventing corrosion. Further more, they are expensive and not easily repairable in short periods of operation stops. In this work, new technology that is effective, economical and easily repairable has proposed to solve the corrosion problems in FGD facilities. This technology contains cathodic protection, coatings and remote monitoring-controlling systems.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.424-428
• /
• 2008

We prepared an ionic gel polymer electrolyte for dye-sensitized solar cells (DSSCs) without leakage problem. Triiodide compound (BTDI) was synthesized by the reaction of benzene tricarbonyl trichloride with diethylene glycol monotosylate and subsequent substitution of tosylate by iodide using NaI. Bisimidazole was prepared by the reaction of imidazole with the triethylene glycol ditosylate under strongly basic condition provided by NaH. BTDI and bisimidazole dissolved in an ionic liquid were injected into the cells and permeated into the $TiO_2$ nanopores. In situ crosslinking was then carried out by heating to form a network structure of poly(imidazolium iodide), thereby converting the ionic liquid electrolytes to a gel or a quasi-solid state. A monomer (BTDI and bisimidazole) concentration in the electrolytes of as low as 30 wt% was sufficient to form a stable gel type electrolyte. The DSSCs based on the gel polymer electrolytes showed a power conversion efficiency of as high as 1.15% with a short circuit current density of $5.69\;mAcm^{-2}$, an open circuit voltage of 0.525 V, and a fill factor of 0.43.

• STI Policy Review
• /
• v.8 no.1
• /
• pp.1-22
• /
• 2017

There has been a pronounced increase in research and development (R&D) expenditure in Singapore over the last two decades, with government spending accounting for a sizeable share. This increase has been spurred by public policy emphasis on research and innovation as engines of economic growth. This paper analyses the impact of R&D on economic performance in Singapore from 1978 to 2012 through the use of time series analysis. The Cobb-Douglas based analysis shows a long-run equilibrium relationship between Total Factor Productivity (TFP) and R&D investments. We found that the short-run productivity of R&D in Singapore is comparable to smaller advanced economies in the Organisation for Economic Co-operation and Development (OECD). However, in terms of long-run R&D productivity, Singapore lags slightly behind the smaller OECD nations and far behind the G7 countries. This suggests leakage of value capture and low absorptive capacity in local firms. Possibility of productivity improvements induced by policy changes in the 1990s was considered, but no evidence of significant structural breaks was found. Lastly, Granger causality analysis reveals that public sector R&D augments private sector R&D capital, thus playing an important role in generating externalities and spillover effects. Policy implications and lessons for other middle-income countries are discussed.

• Korean Journal of Bronchoesophagology
• /
• v.8 no.1
• /
• pp.61-65
• /
• 2002

Background : Acquired tracheoesophageal fistula(TEF) results mostly from Prolonged tracheal intubation and insertion of nasogastric tube. Although the incidence has decreased since the usage of low pressure, high volume cuff of endotracheal tube, it is seldom cured spontaneously and needs surgical treatment. Material and Methods : We have retrospectively reviewed five cases of TEF who underwent surgical treatment for cure from March, 1990 to September, 2001 and analyzed the cause, treatment, postoperative complications and prognostic factors. Results : Majority were men(80% : 4 of 5 patients) and the mean age was 29.4 years old(range, 11-58). The most predominant etiology was prolonged intubation or tracheostomy(80% : 4 of 5 patients) and 3 of 5 patients were treated by tracheal resection and end to end anastomosis with primary closure of esophagus. Postoperative complications occurred in 4 patients the most common complications were wound infection(4 cases) and esophageal leakage(2 cases). Extubation was done on postoperative day 11.5(range, 1-33) days, and factors causing delayed extubation were status esophagus. epilepticus, edema, and tracheal stenosis. Conclusion : Spontaneous closure of TEF is seldom possible and the surgical treatment of choice is tracheal resection and end to end anastomosis with primary repair of the esophagus. preoperative pulmonary rehabilitation and early extubation postoperatively are important factors for success.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2202-2211
• /
• 2016

In certain applications, such as IPT-based EV charger (IPTEC), any variation in alignment and distance between pickup and charger primary leads to a change in leakage and magnetic impedance magnitudes. The power transmission capacity is not always at the maximum level because of these variations. This study proposes a new low-cost tracking method that achieves the Maximum Inductive Power Transmission Capacity (MIPTC). Furthermore, in the proposed method, the exchange of information between load and source is not required. For an application such as IPTEC, the load detected by the IPTEC varies continuously with time because of the change in state of the charge. This load variation causes a significant variation in IPT resonant circuit voltage gain. However, the optimized charging output voltage should be kept constant. From the analysis of the behavior of the IPT circuit at different working frequencies and load conditions, a MIPTC operation point that is independent of load condition can be identified. Finally, the experimental results of a developed prototype IPT circuit test show the performance of the proposed method.

• Journal of Biomedical Engineering Research
• /
• v.18 no.2
• /
• pp.147-156
• /
• 1997

Various prosthetic heart valves have been developed and used clinically, but they have problems, such as thrombogenecity, hemoltsis, high cost and low durability. New types of trileaflet polymer heart valves have been developed in order to use them as inlet and outlet valves in a ventricular assist device. The aim of this study is to determine the hydrodynamic effectiveness of the newly designed trileaflet polymer valves and their feasibility for temporary use in the blood pumps. Trileaflet polymer valves are made of polyurethane, because of its good blood compatibility, high tonsil strength and good resistance to fatigue. An in vitro experimental investigation was perf'ormed in order to ev91ua1e hydrodynamic performance of the trileaflet polymer valves having different design and fabrication tech- niques. The St. Jude Medical valve (SJMV) and floating-type monoleaflet polymer valve (MLPV) were also tested The pressure drop across the valve, leakage volume, and the flow patterns mere investigated for valves. The result of comparative tests showed that the trileaflet polymer valves had a better hydrodynamic performance than the others. TPV which has two stable membrane shape showed the lowest back flow. The pressure hops of TPVs were lower than that of MLPV, but slightly higher than SJMV. The hydrodynamic performance of valves under the pulastile flow showed the similar results as steady flow. The velocity profiles and turbulent intensities were measured at the distal sites of valves using a hot-film anemometer. Central flow was maintained in trileaflet polymer valves, and the maximum turbulent intensities were lower in TPVs comparing to MLPV.

• Microbiology and Biotechnology Letters
• /
• v.23 no.4
• /
• pp.373-377
• /
• 1995

We investigated the survival, $\beta$-galactosidase activity and cellular permeability of lactic acid bacteria such as Lactobacillus acidophilus ATCC 4356, Lactobacillus casei subsp. casei IFO 3533, Streptococcus thermophilus KCTC 2185, Lactobacillus delbrueckii subsp. lactis ATCC 4797, and Lactobacillus delbrueckii subsp. bulgaricus ATCC 11842 in anaerobic condition of pH 1.5-3.5 range. Numbers of all tested viable cells did not decrease at pH 3.5, but decreased rapidly at pH 1.5 and pH 2.5 during 2 hour incubation at modified EG medium. Immediately after 2 hour incubation, the decrease in population at pH 1.5 and pH 2.5 was about 6-8 and 5-7 log cycles/ml, respectively. Lactobacillus acidophilus ATCC 4356 showed the higest survival of all tested bacteria. The $\beta$-galactosidase activity from Lactobacillus delbrueckii subsp. bulgaricus ATCC 11842 and Streptococcus thermophilus KCTC 2185 decreased rapidly at pH 1.5 and 2.5, but there was a little decrease at pH 3.5. The cellular permeability that was measured by the leakage of intracellular materials increased with decrease of pH. These results suggest that the ingested lactic acid bacteria may be destroyed in contact with low pH of gastric acid.