• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.231-233
• /
• 1991

This paper discribes a study on the switching character of MOS-GTO and the design of gate drive circuit. Chopping power supply converter, synchronious and asyncronious motor speed adjustment, inverter, etc., needs low drive energy "high frequency" switches. To fulfill these need, switches must have rapid switching time and insulated gate control. MOS-GTO structure is well suited to these constraints. The power switch is serial installation of a GTO thyrister and a MOS Transistor. The gate of the GTO is linked to positive pole of the cascode structure via a MOS high voltage transistor and ground via a transient absorber diode. This high performance MOS-GTO assembly considerably increases the strength which facilitate the drive of GTO thyristers.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.531-536
• /
• 1991

This paper describes a POWER MOSFET inverter suitable for medium frequency induction heating applications. A series scheme is employed, which is operated at zero phase of the resonant load by PLL control. This ensures maximum power transfer, good efficiency, low EMI noise and reliable operation. Circuit configuration and performance are discussed and design criteria are given. Implementation of a prototype rated at 5KW, $100{\sim}300KHz$ is discribed and experimental results are given.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.6
• /
• pp.51-59
• /
• 1993

In this paper, we study the effects that the variations of machine parameters and frequency of which affect the instability occured in induction motors when operated at low speed or light load, by obtaining the locus of dominant root for the characteristic equation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.109-113
• /
• 2001

A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of ballast,7C link voltage is determined by taking into account the peak voltage of lamp and a filter-inductor at Bridge diode is employed in order to remove harmonics from PFC. The flux density B$_{m}$ is kept 0.2[T] on all of inductors. A small inductor is connected in series with an electrolytic capacitor of PFC to be operated no high-frequency components. The acoustic resonance is eliminated using the spread spectrum technique. Electronic ballast for 250W metal-halide lamp is implemented and the experimental results show that 97% efficiency, no acoustic resonance and low conducted EMI level.l.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1387-1395
• /
• 2016

A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1088-1091
• /
• 1992

Programmed PWM(Pulse Width Modulated) generation techniques eliminating several low order harmonics have been widely used in the inverter circuit which produces minimum current ripple, reduced torque pulsation and thereby improves overall system performance. However, the applications of the programmed PWM technique are limited to CVCF(Constant Voltage Constant Frequency) applications and various motor drives. Although the programmed PWM produces a lower harmonic distorted waveform than the carrier modulated PWM, real-time programming is not possible because of the complicated calculation required for the gating signal. In this paper, a new programmed PWM technique named TAM (time averaging model) is developed to compensate for the demerits of the conventional programmed PWM technique with moderate harmonic distortion. Computer simulations are performed to verify the performance of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.980-982
• /
• 2001

SRM has different characteristics according to their control methods. Therefore, A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about 2(%) and decreased the noise level up to 5[dB]. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.22-28
• /
• 1998

A $g_m$-control technique using a new electronic zener diode (EZD) for CMOS rail-torail input stages is presented. A regulated CMOS inverter is used as an EZD to obtain a constant-$g_m$ input stage. The turn-off characteristic of the proposed EZD is better than that of the existing EZD using two complementarey diodes, and thus, better $g_m$-control can be achieved. With this input stage, a 3V constant-$g_m$ rail-to-rail CMOS op-amp has been designed and fabricated using a $0.8\mu\extrm{m}$single-poly, double-metal CMOS process. Measurements results show that the $g_m$ variation is about 6% over the entire input common-mode range, and the op-amp has a dc gain of 88dB and a unity-gain frequency of 4MHz for $C_L=20pF, R_L=10k\Omega$

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.5
• /
• pp.265-270
• /
• 2006

In this paper EMI problems with induction motor drive system using multi-level inverters are investigated. The high power multi-level inverter usually operates with low switching frequency and produces large noises. Generally, EMI consists of the conduction component through source lines and emission component emitted to the space. This conduction component can be classified to the common-mode between source line and ground, and the normal-mode between lines. The EMI filters for the induction motor drive system are designed and implemented to reduce EMI noise. Finally the designed system is verified by the experiment. The experimental results show that both the normal mode and common mode noises are greatly reduced compared to the system without filters.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.282-284
• /
• 2006

UV lamp systems have been used for cleaning of display pannels of TFT LCD or Plasma Display Pannel (PDP). However, the needs for high efficient cleaning and low cost made high voltage plasma cleaning techniques be developed and improved. In this paper, 3kW high voltage plasma power supply system was developed for LCD cleaning. The 3-phase input voltage is rectified and then inverter system is used to make a high frequency pulse train, which is rectified after passing through a high-power transformer. Finally, bi-directional high voltage pulse switching circuits are used to generate the high voltage plasma.