• Journal of Nutrition and Health
• /
• v.56 no.2
• /
• pp.155-167
• /
• 2023

Purpose: This study investigates the association between seafood consumption and frailty according to gender in the Korean elderly. Methods: Cross-sectional data from the Seventh (2016-2018) Korea National Health and Nutrition Examination Survey was procured for this study. Data from 3,675 subjects (1,643 men and 2,032 women) aged ≥ 65 years were analyzed. Levels of seafood intake were assessed by a one-day 24-hour dietary recall, and subjects were classified into three tertiles by gender according to frailty phenotype: robust, pre-frail, and frail. Multinomial logistic regression analysis was performed to clarify the association between seafood consumption and frailty for each gender. Results: The prevalence of frailty was determined as 13.4% for men and 29.7% for women. Participants with a higher seafood intake had higher intakes of grains, fruits, and vegetables, while the intake of meat was significantly lower. In both men and women, the group with higher seafood intake showed higher energy and micronutrient intakes. The frail prevalence and frailty score were significantly low in the highest tertiles of seafood consumption compared to the lowest tertile in men and women (p < 0.001). After adjusting for confounder, the highest tertile of seafood consumption showed a decreased risk of frailty compared to the lowest tertile only in women (hazard ratio [HR], 0.50; 95% confidence interval [CI], 0.32-0.78; p-trend = 0.008 vs. HR, 0.52; 95% CI, 0.32-0.83; p-trend = 0.008; respectively). Conclusion: Results of this study suggest that seafood consumption potentially decreases the risk of frailty in the elderly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.722-728
• /
• 2015

The demand for shipboard energy management is expected to gradually increase based on ship energy efficiency management plans (SEEMPs), which have been in use since January 1, 2013. Therefore, the fuel consumption of the main engine, which occupies the greatest portion of the energy used, along with elements related to the engine power, should be strictly monitored. There are many different methods for indicating the engine power. However, this study performed an experiment to monitor the status of a ship's engine power in real time using an encoder and a proximate switch, which are economical to purchase and easy to install. In the experiment, the angular velocity during one cycle of a two-stroke low-speed engine was measured, and the measured data were converted to the torque fluctuation. The angular velocity during an abnormal firing condition in the cylinder was also measured, and the torque fluctuation as a result of a misfire was considered. The results were compared with sea trial data to determine the reliability. In this study, the status of the engine power was determined using the torque fluctuation of the main engine in an operating ship.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2641-2646
• /
• 2009

The more growing on home automation system at automatic control, the more efficiency required for energy consumption and for recycling energy in near future. Heating is essential in general apartment. Heating method is two types in apartment. One uses electricity, and other one uses warm water. If use electricity, is not efficient by rise of electric charges. But, It can reduce much in expense aspect, if use warm water. When use warm water, temperature of warm water is not equal from all pipe parts. Therefore, indoor tempera can be unequal with set point. Solution of these problems is as following. Temperature sensor in warm water attach pipe. The measured temperature transmits by real time. Temperature of warm water controls in receiver side. In this paper, we propose an automatic temperature transmission system for the heating pipe at home, that is a low-power based, and supply the energy source from a small AC motor resided in bottom cement mortal. The proposed system is used in power mechanism from a collision process of water-jet using propeller water-difference and also designed a CPU module by Atmega8 at ATMEL co., Inc. and a communication module by CC1020 at Chipcon co., Inc.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.51-59
• /
• 2016

Global consumption of fossil fuels continues to increase. As developing countries use fossil fuel as much as the existing fossil fuel using countries, the total amount of fossil fuel consumed has risen. The finite fossil energy depletion insecurity have become serious. In addition, fossil energy is caused by environmental pollution, economic and social problems remain in assignments that need to be addressed. Although solar power is clean and has many benefits, there are several problems in the process of installing a solar power plant. To solve these problems, floating photovoltaic plants has emerged as an alternative. This floating photovoltaic plants location analysis has not been made yet. In this study, the conditions of the floating photovoltaic plants location is analyzed with the Analytic Hierarchy Process using the terrain and climate factors. The score is assigned to the attribute information of each factor by the classification table. After multiplied by the weight the result is analyzed by visualization of the score. As the result, the score of the northen part of Gyeongsangbuk-do province is higher than the southern part of Gyeongsangbuk-do province. Especially Andongho lake in Andong City and the reservoir in Yeongyang-Gun are extracted as the optimal location. The score of the river boundary is low not the center of the river stream. It is expected that this study would be a more accurate floating solar power plant location analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.565-568
• /
• 2014

This paper presents a 0.2V DC/DC boost converter with regulated output for thermoelectric energy harvesting. To use low voltages from a thermoelectric device, a start-up circuit consisting of native NMOS transistors and resistors boosts an internal VDD, and the boosted VDD is used to operate the internal control block. When the VDD reaches a predefined value, a detector circuit makes the start-up block turn off to minimize current consumption. The final boosted VSTO is achieved by alternately operating the sub-boost converter for VDD and the main boost converter for VSTO according to the comparator outputs. When the VSTO reaches 2.4V, a buck converter starts to operate to generate a stabilized output VOUT. Simulation results shows that the designed converter generates a regulated 1.8V output from an input voltage of 0.2V, and its maximum power efficiency is 60%. The chip designed using a $0.35{\mu}m$ CMOS process occupies $1.1mm{\times}1.0mm$ including pads.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.77-83
• /
• 2023

Energy consumption is increased by rapid industrialization. As a result, climate change is accelerating due to the increase in CO₂ concentration in the atmosphere. Therefore, a shift in the energy paradigm is required. Hydrogen is in the spotlight as a part of that. Currently 95% of hydrogen is fossil fuel-based reforming hydrogen which is accompanied by CO₂ emissions. This is called gray hydrogen, if the CO₂ is captured and emission of CO₂ is reduced, it can be converted into blue hydrogen. There are 3 technologies to capture CO₂: absorption, adsorption and membrane technology. In order to select CO₂ capture technology, the analysis of the exhaust gas should be carried out. The concentration of CO₂ in the flue gas from the hydrogen production process is higher than 20%if water is removed as well as the emission scale is classified as small and medium. So, the application of the membrane technology is more advantageous than the absorption. In addition, if LNG cold energy can be used for low temperature CO₂ capture system, the CO₂/N₂ selectivity of the membrane is higher than room temperature CO₂ capture and enabling an efficient CO₂ capture process. In this study, we will analyze the flue gas from hydrogen production process and discuss suitable CO₂ capture technology for it.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.987-999
• /
• 2005

The purpose of this study was to evaluate the effect of short-term nutrition education camp on food and nutrient intakes of obese children. The subjects of the study were 30 obese children in Gumi city who have obesity index over $130\%$. The food consumption of the subjects was surveyed for three days before the camp, for eleven days during the first camp and for three days after the second camp, by food record method. The mean intakes of energy and carbohydrates in obese children were significantly decreased during and after the nutrition education camp, and that of vitamin C was significantly increased after the camp. The mean daily total food intake of the subjects was gradually decreased from 1646.4g before the camp to 1438.6g during the camp and 1412.66g after the camp. Energy and fat intake ratios from grains and milks were significantly decreased after the camp compared with that before the camp, and the energy intake ratio from grains, milks and eggs was significantly low during the camp. The protein intake ratios from grains, potatoes, vegetables and fishes were significantly increased after the camp. The calcium intake ratios from potatoes and milks were significantly increased during and after the camp, and the ratio from eggs was significantly decreased after the camp. The iron intake ratios from potatoes and fishes were significantly increased during and after the camp, and the ratio from grains was significantly low during the camp. The results of the study demonstrated that the short-term nutrition education program positively affected the overall food consumption and nutrients intakes of obese children.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.837-847
• /
• 2000

For the treatment of wastewaters generated from beer industry and petrochemical company with high organic and nitrogen contents, laboratory scale of A/O Pure-Oxygen Biofilm (POB) process was developed and studied by means of the comparative economic analysis with extended aeration process. When the wastewater of beer company was initially treated by the A/O POB process in the ranges of 70 to 150 mg TOC/L diluted with tap water, higher than 92% of TOC removal was accomplished in the all ranges. In case of petrochemical wastewater, the initial TOC removal was as low as 52%, though, it increased to 86% after 32 days of operation and also the TKN removal marked 71% after 27 days. Continuous high removal rates were monitored in both the TOC and TKN parameters during the experimental period. Due to the cost for PSA (Pressure Swing Adsorption) setting and biomass supporting media installation, the initial construction cost of A/O POB process was 2.9 times higher than that of extended aeration process. However, the advantages such as low sludge production, no need for sludge recycling and low energy consumption allow the A/O POB process to have 2.5 times lower operation and maintenance costs. Consequently, in the long term of operation, it is likely that A/O POB process would show higher performance as well as cost effectiveness compared to extended aeration process.

• Nutrition Research and Practice
• /
• v.4 no.3
• /
• pp.229-234
• /
• 2010

Recently, we found and analyzed vitamin $B_{12}$ in some Korean traditional plant foods which had not reported, yet. This study was to investigate vitamin $B_{12}$ intake and its dietary sources and the vitamin $B_{12}$ status in the very old elderly Koreans. We measured serum vitamin $B_{12}$ level and estimated the amounts of vitamin $B_{12}$ intake from different dietary sources in female elderly Koreans aged 85 and over who had consumed a relatively low animal traditional diet for the whole life. The average age of the subjects (n = 127) was 98.0 years (85-108 years). The assessment on energy and nutrient intake involved a one-day 24-hour recall, and serum vitamin $B_{12}$ concentration was measured by radioimmunoassay. Overall diet pattern was not different between the 85-99 yr-old group and centenarians, except centenarians were taking more dairy product. The average ratio of plant food to animal food consumption was 87.5:12.5 in weight. The average vitamin $B_{12}$ intake of our subjects was 3.2 ${\mu}g$, and 52.7% of subjects consumed under estimated average requirement, 2.0 ${\mu}g$/day. On dietary source, 67.3% of dietary vitamin $B_{12}$ was from meat, eggs and fishes and 30.6% was from plant foods, such as soybean-fermented foods, seaweeds, and kimchi. The average serum vitamin $B_{12}$ concentration was 450.5 pg/mL, and low serum vitamin $B_{12}$ (< 200 pg/mL) was found in 9.6% of subjects. Dietary vitamin $B_{12}$ intake was significantly lower in subjects with low serum vitamin $B_{12}$ (0.79 ${\mu}g$/day) than those with normal serum vitamin $B_{12}$ (3.47 ${\mu}g$/day). There were no significant difference in vitamin $B_{12}$ intake and its dietary sources and serum vitamin $B_{12}$ level between the 85-99 yr- old group and centenarians. In conclusion, several plant-origin foods including seaweed, soybean-fermented foods, and kimchi, may contribute significantly to good vitamin $B_{12}$ status in very old elderly Koreans.