• 전력전자학회논문지
• /
• 제17권5호
• /
• pp.393-400
• /
• 2012

The modularized equalizers normally use additional components among the modules in the long series-connected lithium-ion battery string. In these approaches, the overall systems are heavy, bulky, and high-priced. Furthermore, the losses related to additional components decrease the system efficiency. To avoid these problems, a modularized equalizer, which has no additional components among the modules, is required. This paper proposes a novel control scheme using the magnetizing energy of the multi-winding transformer for the module equalization. In this scheme, the high duty cycle is applied to the module where the voltage is higher than the reference voltage and the low duty cycle is applied to the module where the voltage is lower than the reference voltage. Due to the different duty cycle, more electric charges are transferred from high voltage module to the low voltage module during the turn-off switching interval. Using the proposed control scheme, the equalizer system does not suffer from the size, cost, and loss related to the modularization. The experimental results are provided to verify the effectiveness of the proposed modularized equalizer.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.6-17
• /
• 1998

치아미백은 100여년전 이상부터 시행되어 왔으나, 지난 4반세기 동안의 생활치아 미백술의 표준적인 방법은 과산화수소와 열원을 사용하거나, 열원과 광원을 복합해서 사용하는 것이었다. 이 술식의 단점은 술식의 복잡성, 많은 비용, 결과의 불확실성과 환자의 불편이었다. 1989년 3월에 치과계에서는 Haywood와 Heyman에 의해 발표된 새로운 생활치아 미백술(Night Guard Vital Bleaching)을 도입했다. 치아구조에 대한 carbamide peroxide의 화학적 효과를 알고 있었으면 수년 전에 개발되었을 아주 간단한 치료술식이다. 이 방법은 시술이 쉽고, 사용 되는 재료의 높은 안전성, 낮은 치료비, 높은 성공률로 최근 다시 치아미백 붐을 일으키는데 일조를 하고 있으며, 생활치아 미백술의 표준적인 방법으로 신속히 자리잡아가고 있다.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.97-107
• /
• 2012

일반적으로 고체 추진기관은 큰 비추력과 재시동 능력을 갖고 있는 액체 추진기관에 비하여 경비 면에서 효과적이고 큰 추력 능력을 갖고 있다. 이러한 이유로 고체 추진기관은 주로 부스터나 1단 추진기관으로 많이 사용되고 있다. BBL 접근 방법이 저 비용과 제한된 개발기간 그리고 낮은 위험성을 고려하여 연구되어 오고 있다. 탄소 섬유 에폭시 레진의 모터 케이스 사용이 확대되고 있고 특히 비활성 질량 감소로 고 강도 탄소섬유가 관심을 끌게 될 것이다.

• 멤브레인
• /
• 제32권4호
• /
• pp.227-234
• /
• 2022

폐수는 석유 정제 산업에서만 방출되는 것이 아니고 아니라 가죽, 섬유, 페인트, 목재, 염료 가공 산업에서 또한 방출된다. 이런 산업 폐수는 중금속과 질소화합물 등 수질오염물질을 포함하고 있으며 화학적 산소요구량(COD)이 높다. 안전한 처리를 위해 폐수에서 각종 오염물질을 걸러내는 방식이 있지만 막 기반 기술은 고효율, 저비용으로 가장 효율적인 방법 중 하나이다. 다양한 막 중에서, 제올라이트 막은 가성비로 주목을 받고 있으며 많은 연구를 거쳤다. 본 리뷰논문은 i) 폐수처리, ii) 미세여과막, iii) 중공사막, iv) 초여과막의 순서로 폐수처리를 위한 제올라이트 막의 최근 진척을 중점으로 다루고 있다.

• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.294-302
• /
• 2021

In this study, the 3D printing technique called design for additive manufacturing (DfAM) that is widely used in various industries was applied to marine leisure ships of equipment. The DfAM for the stanchion for crew safety was applied to the equipment used in an actual recreational craft. As design constraints, the design alternatives were not to exceed the safety and weight of the existing stainless steel material, which were reviewed, and the production of a low-cost FFF-type 3D printing method that can be used even in small shipyards was considered. Until now, additive manufacturing has been used for manufacturing only prototypes owing to its limitations of high manufacturing cost and low strength; however, in this study, it was applied to the mass production process to replace existing products. Thus, a design was developed with low manufacturing cost, adequate performance maintenance, and increased design freedom, and the optimal design was derived via structural analysis comparisons for each design alternative. In addition, a life-cycle assessment based on the ISO 1404X was conducted to develop sustainable products. Through this study, the effectiveness of additive manufacturing was examined for future applications in the shipbuilding industry.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.27-36
• /
• 2004

Software summarized packaging technology related is needed for low cost and high efficiency in production and packaging design of corrugated board, and in development of these softwares, distribution and packaging environment of one's country must be reflected, well. In domestic occasion, software related to corrugated board packaging dont's exist nearly, and in many industrial fields, the more higher role and importance of packaging in various industrial field is, the more higher necessity of that is. In this study, on the base of preceeding studies (Park, 2001; 2003; 2003), software to optimize board combination that is most importance and sensitivity in composition of cost elements in production and packaging design of corrugated board was developed. This software was composed of input module, output module, database and management module, and calculation module, and efficiency of this software was analyzed on the both sides of sensitivity in design result and effectiveness in a case analyse. In the inward design results having same strength, board combination balance, bursting strength, box weight, and cost were greatly different. Therefore, optimum inward design according to user's design specifications is possible, and in a case analysis for actual products, obtained the more profitable results than before design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.913-914
• /
• 2006

In industrial field, electric fork-lift has been mainly powered by batteries which are varied from DC 36V to 80V. Operating electric fork-lift truck depends on stable electric power supplies which are ensured by using Switched Mode Power Supply (SMPS). This paper presents design of SMPS for stable electric power supply. The SMPS has much strength such as high effectiveness, low cost and high stability of output voltage. At the same time, SMPS is small and multi output and has simple design of circuit.

• Clinical and Experimental Pediatrics
• /
• 제56권4호
• /
• pp.145-150
• /
• 2013

Endoscopic treatment is a minimally invasive treatment for managing patients with vesicoureteral reflux (VUR). Although several bulking agents have been used for endoscopic treatment, dextranomer/hyaluronic acid is the only bulking agent currently approved by the U.S. Food and Drug Administration for treating VUR. Endoscopic treatment of VUR has gained great popularity owing to several obvious benefits, including short operative time, short hospital stay, minimal invasiveness, high efficacy, low complication rate, and reduced cost. Initially, the success rates of endoscopic treatment have been lower than that of open antireflux surgery. However, because injection techniques have been developed, a recent study showed higher success rates of endoscopic treatment than open surgery in the treatment of patients with intermediate- and high-grade VUR. Despite the controversy surrounding its effectiveness, endoscopic treatment is considered a valuable treatment option and viable alternative to long-term antibiotic prophylaxis.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.239-246
• /
• 2004

In this paper, we develop and implement a high integrity GNC(Guidance, Navigation, and Control) system, based on the combined use of the Global Positioning System (GPS) and an Inertial Measurement Unit (IMU), for autonomous land vehicle applications. This paper highlights guidance for the predetermined trajectory and navigation with detection of possible faults during the fusion process in order to enhance the integrity of the navigation loop. The implementation of the GNC system to the autonomous land vehicle presented with fault detection methodology considers high frequency faults from the GPS receiver caused by shadowing and multipath error The implementation, based on a low-cost, strapdown INS aided by standard GPS technology, is described. The results of the field test in the urban environment are presented and showed effectiveness of the GNC system.

• Tuberculosis and Respiratory Diseases
• /
• 제77권2호
• /
• pp.55-59
• /
• 2014

The US National Lung Screening Trial (NLST) demonstrated a 20% reduction in lung cancer mortality and a 6.7% decrease in all-cause mortality. The NLST is the only trial showing positive results in a high-risk population, such as in patients with old age and heavy ever smokers. Lung cancer screening using a low-dose chest computed tomography might be beneficial for the high-risk group. However, there may also be potential adverse outcomes in terms of over diagnosis, bias and cost-effectiveness. Until now, lung cancer screening remains controversial. In this review, we wish to discuss the evolution of lung cancer screening and summarize existing evidences and recommendations.