• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.260-267
• /
• 2011

Nowadays, automobile manufacturers are faced with increasing global competition which is required low cost as well as high quality. To reduce shipping and handling cost and delivery time, lots of automobile manufactures tried to build their new factory in the neighborhood of market. Simultaneously, many factories are under construction in developing countries to make efficient use of low-wage workers. However, because systems are installed in developing countries as the same type of domestic facilities, systems have lots of problems such as high installation cost and inefficient use of manpower. To find core problems and generate optimal solution of these problems, thinking process of TOC(Theory Of Constrains) is used. In case of transmission gear machining system, semi-auto system is proposed as the best solution to increase manpower efficiency and system utilization. Semi-auto system consists of automatic machining process and manual transporting process. The system layout is generated based on semi-auto process concept. And, 3D simulation method using QUEST is used to verify production volume of generated system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1798-1799
• /
• 2011

In this paper, A new cost-effective and accurate input noise rejection method for High Speed Counter module of PLC (Programmable Logic Controller) is proposed. By using combination of simple additional logic circuit and the Timer Pulse function of general purpose MPU, Cost-effectiveness and improvement of accuracy of filtering function can be achieved. This proposed method is verified by simulation. This proposed method is much useful for simple industrial controller based on simple microprocessor because of simplicity, accuracy and low cost.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.406-412
• /
• 1998

This paper describes a contact position detection method of a capacitive touch screen panel. The proposed method is composed of a circuited compensating algorithm generating an output signal having phase difference to an input signal associated with contact position, converts both input and output signals into digital waveform (5V logic), and calculates the phase difference. Finally, position information with the phase difference is obtained by using a low-cost microprocessor, which is convenient to compensate non-linearity error. The proposed method, that computes phase difference directly, has advantages in feasibility and cost because it minimizes the use of analog devices; rather, it utilizes, cost effective digital circuit. Analytical results are also given.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.303-310
• /
• 2019

Background Prosthetic hands with a myoelectric interface have recently received interest within the broader category of hand prostheses, but their high cost is a major barrier to use. Modern three-dimensional (3D) printing technology has enabled more widespread development and cost-effectiveness in the field of prostheses. The objective of the present study was to evaluate the clinical impact of a low-cost 3D-printed myoelectric-interface prosthetic hand on patients' daily life. Methods A prospective review of all upper-arm transradial amputation amputees who used 3D-printed myoelectric interface prostheses (Mark V) between January 2016 and August 2017 was conducted. The functional outcomes of prosthesis usage over a 3-month follow-up period were measured using a validated method (Orthotics Prosthetics User Survey-Upper Extremity Functional Status [OPUS-UEFS]). In addition, the correlation between the length of the amputated radius and changes in OPUS-UEFS scores was analyzed. Results Ten patients were included in the study. After use of the 3D-printed myoelectric single electromyography channel prosthesis for 3 months, the average OPUS-UEFS score significantly increased from 45.50 to 60.10. The Spearman correlation coefficient (r) of the correlation between radius length and OPUS-UEFS at the 3rd month of prosthetic use was 0.815. Conclusions This low-cost 3D-printed myoelectric-interface prosthetic hand with a single reliable myoelectrical signal shows the potential to positively impact amputees' quality of life through daily usage. The emergence of a low-cost 3D-printed myoelectric prosthesis could lead to new market trends, with such a device gaining popularity via reduced production costs and increased market demand.

• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.99-107
• /
• 2018

The purpose of the study compares the difference between the carriers' reported large consumption emotion of customers in regards to the appearance of the crew. The research method was conducted for 15 days from March 11 to 25, 2018, and the number of valid samples was 289 in total. The results of the study showed that customers differ in the influence of perceived consumption sentiment between full service carrier and low cost carrier on uniform of flight attendant. Consumer sentiments perceived by low cost carriers are comfortable, familiar, and lively, and these results have proven that they are distinguished from low cost carriers by being clean, sophisticated, and large. The results of this study are significant when the airline has changed the crew uniform at the right time and considered it to be a marketing tool that is important to the image change of the company.

• Journal of the korean veterinary medical association
• /
• v.19 no.1
• /
• pp.54-61
• /
• 1983

The present paper describes a simple colorimetric determination method of serum or plasma free fatty acids in various animal for those who are in the laboratories unequiped with high-cost newer analysing equipments and for those clinicians with low-cost a

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.387-393
• /
• 2001

Installing vibration control devices in the structure rises as a solution instead of increasing structural strength considering construction cost. Especially, viscoelastic dampers show excellent vibration control performance at low cost and are easy to install in existing structures compared with other control devices. Therefore, cost-effectiveness of structure with viscoelastic dampers needs to be evaluated. Previous cost-effectiveness evaluation method for the seismically isolated structure(Koh et al., 1999;2000)is applied on the building structure with viscoelastic dampers, which combines optimal design and cost-effectiveness evaluation for seismically isolated structures based on minimum life-cycle cost concept. Input ground motion is modeled in the form of spectral density function to take into account acceleration and site coefficients. Damping of the viscoelastic damper is considered by modal strain energy method. Stiffness of shear building and shear area of viscoelastic damper are adopted as design variables for optimization. For the estimation of failure probability, transfer function of the structure with viscoelastic damper for spectral analysis is derived from the equation of motion. Results reveal that cost-effectiveness of the structure with viscoelastic dampers is relatively high in how seismic region and stiff soil condition.

• The Journal of Fisheries Business Administration
• /
• v.8 no.2
• /
• pp.1-19
• /
• 1977

The results analyzed of the actual state of medium size two-boat trawler fishery based on the cost expended in 1975 are as follows: According to the calculation of interest, the total cost of this fishery comes to ￦ 55,353,807, and in this account, the production cost comes to ￦ 49,747,383 (89.9%) and the material cost comes to ￦ 27,027,662(48.8%), the labour cost comes to ￦ 10,381,013 (18.8%) the expenses, ￦12,338,708(22.3%) and commision and interest comes to ￦ 5,606,424 (10.1%). As above the fishery comes is 90% of production cost for the expense of production. The ratio of cost element to the total cost 100 is as follow: Fuel: 23.6%, allocation: 14.3%, fishing gear: 14.1%, boat repair: 13.0%, fish box: 8.5%, ice: 14.1%, commission: 6.9%, food cost: 4.5%, interest: 3.2%, transportation fee: 2.8%, consumption: 2.6%, tax: 2.5%, depreciation: 2.4%, administrative expense: 1.6%. The unit cost of catches to each box, including the interest, cames to ￦ 2,167 and not calculating the interest it comes to ￦ 2,098. The cost production to each kg comes to ￦ 114 including interest, without interest, it comes ￦110. When the production cost comes to 90.6%, it comes to 9.4% of total revenue. The reason which this fishery brings low income is that the boats are almost old and semi-diesel engine is used. So, fuel expense and repaire expenses needs too much. Acconding to above this fishery needs to replace new boat and new engine. And new are for this fishery needs to bring under cultivation in order to bring good income with the new method for this fishery. Specially, this fishery brings low income from July to September because of its rest from labour. And so, the expenses, item, and account of money, and the trust money the cost element are not showed in August.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.61-72
• /
• 2013

Purpose - It is widely accepted that the process of developing marketing strategy is composed of three steps: market segmentation, target market selection and positioning. However, mass marketing strategy based on cost reduction through economies of scale and standardized products, can be also an effective strategic option. Many marketing scholars including Theodore Levitt emphasize the importance of applying the mass production concept to various industries including service industries. Especially, in times of economic downturn, the capability of providing consumers with low-priced, value products can be an important source of competitive advantage, as well as the ability of providing high-priced premium products. Marketers should decide whether they will implement mass marketing strategy or target marketing strategy. The present study theoretically shows that firms should understand the target customers' price elasticity as well as the firm's cost structure in order to make such a strategic decision. Research design, data, and methodology - Instead of implementing an empirical study, this study provides a theoretical(mathematical) investigation on the effect of consumers' price elasticity on a firm's optimal price level, profit, sales volume, revenue, and cost. The results are mostly deduced from derivative calculations and several graphs are utilized to represent the results on the relationships between the variables under study. Results - The analytical results suggest that it is more profitable for a firm to adopt the segment/target marketing strategy (more specifically the differentiation strategy) when the degree of consumers' heterogeneity is high and the proportion of the fixed cost in the total cost is low. On the other hand, if the degree of consumers' heterogeneity is low and the fixed cost is high, it is better to adopt the mass marketing strategy or the cost leadership strategy. The strategy of concentrating on a single target market will be effective when consumers' needs are highly heterogeneous but the fixed cost is high. Any of the three types of generic strategies proposed my Porter(1980, 1985) can be applied when both the consumers' heterogeneity and the fixed cost are low. This study also proposes the contribution-margin-based method for developing the optimal pricing strategy. Conclusions - One of the primary roles of marketers is to find a proper compromise between the two conflicting goals of maximizing customer satisfaction and minimizing cost. In order to do so, he or she should understand the characteristics of the target customers as well as the cost structure of the firm. In addition to the theoretical analyses, this study discusses several business cases and explains how superior companies find the optimal compromise position between these two goals and dominate the market. One of the radical changes recently taking place in business arena is the reduction of production and distribution costs of both physical goods and information due to the advancement and the wide diffusion of information technology. The cost reduction combined with lowered priced elasticity incurred by customized products and services, will enable many firms to adopt the mass customization strategy.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.288-294
• /
• 2015

CRC function has been built into the high-speed semiconductor memory device in order to increase the reliability of data for high-speed operation. Also, DBI function is adopted to improve of data transmission speed. Conventional CRC(ATM-8 HEC code) method has a significant amounts of area-overhead(~XOR 700 gates), and processing time(6 stage XOR) is large. Therefore it leads to a considerable burden on the timing margin at the time of reading and writing of the low power memory devices for CRC calculations. In this paper, we propose a CRC method for low cost and high speed memory, which was improved 92% for area-overhead. For low-cost implementation of the CRC scheme by the DBI function it was supplemented by data bit error detection rate. And analyzing the error detection rate were compared with conventional CRC method.