• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.84-91
• /
• 1985

This paper proposes the theory for the Low Cost Automation (LCA) as a intermediate process of the factory automation, where the SCA is new adaptation for the improving productivity without changing the current product lines. And also this paper deals with the case study for the predictable effects and technical method at the extruding cable lines. As the results, the implementation of the LCA theory could be acomplished saving materials and man power, improving reliability and productivity. For this facilities, it cost within 5% extra expense of a extruding cable line systems. And it could be refund in six months.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.502-507
• /
• 2011

A study on environmental noise hasn't fully researched yet. As society has developed and the quality of life has improved, people started to show a concern about an environmental noise. To ensure a economic feasibility of countermeasures of noise, it is necessary to apply a cost-benefit analysis on choosing optimum measurements. In this study, we addressed the estimation method of the environmental noise value and several domestic and oversea case studies. We also estimate economic value of noise reduction level which is gained from applying noise reduction measurements.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.298-299
• /
• 2003

As the demand for high frequency(bandwidth) optical module of reduced cost is increased, there are considerable needs for low cost／ high reliable optical packaging method. In order to meet these requirements, the researches using silicon optical bench(SiOB) technology have been developed as one of the leading technology. In this paper, we discuss optical package using one aspherical lens mounted on SiOB by passive alignment, and present the reliability data for the optical module, which are temperature cycling between 40C and +85C, and high temperature storage 85C(unbiased), 2000hour.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.258-261
• /
• 2001

High Power factor Active Filter converter is used for Inverter Air conditioner power supply to meet IEC standard. In the active filter topology for power factor, extra switch just control the input current indirectly to meet the IEC standard for reducing the cost and size. In this paper, low cost converter was suggested by simulation using extra switch which auxiliary pulse is inserted and quasi resonant soft switching topology control is adapted for panel's inverter air conditioner converter Inserting auxiliary Pulse method to the extra switch has the benefit of reducing THD by low cost input control circuit. And also quasi resonant soft switching topology can reduce switching loss. So both technical is suitable for Panel's Air conditioner.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.47-48
• /
• 2017

This paper presents a low-cost portable lithium battery parameter measuring and estimating the solution. In this method, lithium battery characteristics are monitored during discharging and charging cycles. The battery profile is analyzed, and its key parameters are estimated by GNU Octave running on Raspberry Pi Zero, a mini computer. The proposed method can measure and estimate the battery parameters for SOC and DOD estimation with reasonable accuracy as well as portability features.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1055-1056
• /
• 2006

This paper presents a remote dimming control method for the electrodeless lamps using 2.4 GHz RF communication. Since the proposed dimming method are implemented with a simplest open loop control using ISM band HF modem and low cost MCUs, and the remote controller has just several functions such as On/Off and duty ratio increasing/decreasing. It can be made with low cost. In this paper, the detailed digital logics of the proposed remote dimming control are described and the experimental results are presented.

• 산업기술연구
• /
• 제32권A호
• /
• pp.103-107
• /
• 2012

Due to improvement of the semiconductor technology, the LED replaces the conventional lighting source and LED drivers have been studied and developed. The LED is driven by the constant current control method according to its characteristics. For the constant current control method, the linear regulator and the switching regulator is used. The switching regulator is usually used to LED drivers because it has specific characteristics as the wide input dynamic range and the high efficiency. In this paper, we have described the principle and the implement of the switching regulator, using the drive IC and the low cost DSP chip. Also, both methods have been implemented and its electrical characteristics had almost same experimental results in the steady state and the transient state.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1168-1171
• /
• 2009

We propose a low cost, high performance, effective overdrive implementation method for liquid crystal display systems. The technique can calculate all overdrive values using higher order approximation algorithm by only three measurements. We find that our technique can be applied regardless of LCD panels. Due to its simplicity, we can also tune motion performance of the LCD systems without measurements.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.372-376
• /
• 2001

Due to several advantages of Pulse Width Modulation(PWM) Converter, such as unity power factor operation, elimination of low-order harmonics and regeneration of motor braking energy to source, the application range of PWM Converter has been rapidly extended in industrial application. Nowadays, vector control algorithm and space vector PWM(SVPWM) method are applied to improve the performances of PWM Converter, but vector control algorithm and SVPWM require to use Microprocessor and other digital devices in hardware, causing costly and somewhat large dimension system. In every practical application of energy conversion equipments, the design and implementation should be carried out considering cost and performance. High performance and low cost is the best choice for energy conversion equipments. So, this paper presents the practical design method and implementation results of 3-phase PWM Converter with analog hysteresis current controller, and verifies the performances of unit power factor operation and energy regeneration operation via experimental results.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.58-60
• /
• 2001

Two experiments were conducted to study the effects of nutrient level and feeding method of split diets for a.m. and p.m. on laying hen performance. In both studies, ISA Brown layers were kept in laying hen cages and treatments were represented by three or four replicates each containing 25 or 34 birds. In Experiment 1, the control group(C) was fed a conventional single diet throughout the day and split diet groups(T1, T2 and T3) were offered high energy/protein - low Ca diet and low energy/protein - high Ca diets in a.m. and p.m., respectively. In split diet groups, ME and CP consumption, and feed cost required per day and per kg egg mass were significantly reduced(P＜0.05) compared to C group, while the hen-day egg production, average egg weight and daily feed intake were not different among treatments. In the second study, C and T1 groups were fed the diets same to the C and T2 groups in Experiment 1, respectively. And T2 group was fed the diet mixed with the split diets for a.m. in mash and p.m. in pellet used in T1 group. In T1 and T2 groups, daily feed intake and average egg weight were significantly reduced(P＜0.05), while the hen-day egg production was not influenced by the feeding system. Daily ME and CP consumption, and feed cost were reduced(P＜0.05) in T1 and T2, while the ME, CP and feed cost required per kg egg mass were not different to the C group. In both study, eggshell qualities were improved(P＜0.05) by split diet feeding. It was concluded the feed and nutrients consumption, feed cost per day or per kg egg mass could be spared by introducing split diets for a.m. and p.m., and the feeding method of mixed diet of split diets was also convenient and effective for sparing feed cost and improvement of eggshell quality.