• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.54-58
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for distortion variation minimization. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.185-194
• /
• 2016

In this paper, a novel rate control scheme for low delay video coding of High Efficiency Video Coding (HEVC) is proposed. The proposed scheme is developed by considering a new temporal prediction structure of HEVC. In the proposed scheme, the relationship between bit rate and quantization step is exploited firstly to formulate an accurate quadratic rate-quantization (R-Q) model. Secondly, a method of determining the quantization parameters (QPs) for the first frames within a group of pictures is proposed. Thirdly, an accurate frame-level bit allocation method is proposed for HEVC. Finally, based on the proposed R-Q model and the target bit allocated for the frame, the QPs are predicted for coding tree units by using rate-distortion (R-D) optimization. We compare our scheme against that of three other state-of-the-art rate control schemes. Experimental results show that the proposed rate control scheme can increase the Bjøntegaard delta peak signal-to-noise ratio by 0.65 dB and 0.09 dB on average compared with the JCTVC-I0094 and JCTVC-M0036 schemes, respectively, both of which have been implemented in an HEVC test model encoder; furthermore, the proposed scheme achieves a similar R-D performance to Wang's scheme, as well as obtaining the smallest bit rate mismatch error of all the schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.726-742
• /
• 2000

A novel rte control algorithm consisting of two major components, i.e. a variable encoding frame rate method and a hybrid DCT/wavelet I-frame coding scheme, is proposed in this work for low bit rate video coding. Most existing rate control algorithms for low bit rate video focus on bit allocation at the macroblock level under a constant frame rate assumption. The proposed rate control algorithm is able to adjust the encoding frame rate at the expense of tolerable time-delay. Furthermore, an R-D optimized hybrid DCT/wavelet scheme is used for effective I-frame coding. The new rate-control algorithm attempts to achieve a good balance between spatial quality and temporal quality to enhance the overall human perceptual quality at low bit rates. It is demonstrated that the rate control algorithm achieves higher coding efficiency at low bit rates with a low additional computational cost. The variable frame rate method and hybrid I-frame coding scheme are compatible with the bi stream structure of H.263+.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1040-1057
• /
• 2014

In this paper, a new bit rate estimation scheme is proposed to determine the bit rate for each subclass in an MPEG-2 TS to H.264/AVC transcoder after dividing an input MPEG-2 TS sequence into several subclasses. Video format transcoding in conventional IPTV and Smart TV services is a time-consuming process since the input sequence should be fully transcoded several times with different bit-rates to decide the bit-rate suitable for a service. The proposed scheme can automatically decide the bit-rate for the transcoded video sequence in those services which can be stored on a video streaming server as small as possible without losing any subject quality loss. In the proposed scheme, an input sequence to the transcoder is sub-classified by hierarchical clustering using a parameter value extracted from each frame. The candidate frames of each subclass are used to estimate the bit rate using a statistical analysis and a mathematical model. Experimental results show that the proposed scheme reduces the bit rate by, on an average approximately 52% in low-complexity video and 6% in high-complexity video with negligible degradation in subjective quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.842-847
• /
• 2004

We present a new video coding technique to tradeoff frame rate and picture quality for low bit rate video coding. We show a model equation for selecting the optimal frame rate from the motion content of the source video. We can determine DCT quantization parameter (QP) using the frame rate and bit rate. For objective video quality measurement we propose a simple and effective error measure for skipped frames. The proposed method enhances the video quality up to 2 ㏈ over the H.263 TMN5 encoder.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.1
• /
• pp.47-54
• /
• 2012

Video contents in the mobile environment are processed with the low bit-rate relative to normal video contents due to the consideration of network traffic; hence, it is necessary to protect the copyright of the low bit-rate video contents. The algorithm for watermarking appropriate for the mobile environment should be developed because the performance of the mobile devices is much lower than that of personal computers. This paper suggested the invisible spread spectrum watermarking method to the low bit-rate video contents, considering the low performance of the mobile device in the M-Commerce environment; it also enables to track down illegal users of the video contents to protect the copyright. The robustness of the contents with watermark is expressed with the correlation of extraction algorithm from watermark removed or distorted contents. The results of our experiment showed that we could extract the innate frequencies of M-Sequence when we extracted M-Sequence after compressing the contents with watermark easily. Therefore, illegal users of the contents can be tracked down because watermark can be extracted from the low bit-rate video contents.

• Information and Communications Magazine
• /
• v.11 no.8
• /
• pp.60-77
• /
• 1994

This paper presents a survey of video coding schemes which use wavelet transform for the videophone on very low bit rate commun ication chan nel( ego 10 Kbps Public Service Telephone Network). Firstly, we introduce the standardization efforts to make the low bit rate videophone architecture and the typical application of low bit rate video coding scheme. Secondly, we summarize the several requirements on videophone, delay, encoder/decoder complexity, low bitrate, and progressive transmission capability. Third, we review the basic theory of wavelet transform without much mathematics. We compare the wavelet transform with short-time fourier transform and subband filters. Fourth, we summarize the video coding schemes proposed so far, and evaluate them with Ule requirements. Lastly, we conclude with fu¬ture research directions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1814-1829
• /
• 2011

In this paper, we present a model-based video bit rate estimation scheme for reducing the bit rate while maintaining a given target quality in many video streaming services limited by network bandwidth, such as IPTV services. Each item of video content can be stored on a video streaming server and delivered with the estimated bit rate using the proposed scheme, which consists of the following two steps: 1) In the first step, the complexity of each intra-frame in a given item of video content is computed as a frame feature to extract a group of candidate frames with a lot of bits. 2) In the second step, the bit rate of the video content is determined by applying statistical analysis and hypothesis testing to that group. The experimental results show that our scheme can reduce the bit rate by up to 78% with negligible degradation of subjective quality, especially with the low-complexity videos commonly used in IPTV services.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.513-520
• /
• 2006

In this paper, we propose a novel real-time frame-layer rate control algorithm using sliding window method for low bit rate video coding. The proposed rate control method performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. A new frame-layer rate-distortion model is derived, and a non-iterative optimization method is used for low computational complexity. In order to reduce the quality fluctuation, we use a sliding window scheme which does not require the pre-analysis process. Therefore, the proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performance than the existing TMN8 rate control method.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2629-2639
• /
• 1997

The video coding for very low bit-rate has recently received considerable attention, but the conventional coding schemes with block based transform suffer from the blocky effect for the constraints of limited bit-rate. In this paper, we present a video coding system based on wavelet transform and multiresolution motion estimation/compensation for very low bit-rate video. The proposed scheme uses the wavelet transform which is flexible to represent non-stationary image signals and adaptable to the human visual characteristics. The wavelet transformed coefficients are coded by various coding modes in accordance with the sum of absolute error after motion estimation/compensation in wavelet decomposed domain. And simple buffer control technique is applied to handle constant image quality. It is shown that the presented scheme has more acceptable image quality without blocky effects than conventional block based transform video coding.