• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1621-1627
• /
• 2013

This paper compares power losses between voltage controlled before and after using power conversion device in AC feeding system. For this purpose we present voltage control procedures and criteria and model high speed line and train using PSCAD/EMTDC to compare power losses in various feeding condition. Power losses of the simulation result in power control before and after in single point feeding system was reduced maximum 0.37 MW(23.8 %) and average 0.23 MW(20.5 %) when one vehicle load operates maximum load condition. When three vehicles operate maximum load condition in one feeder section, power losses after voltage control was reduced 1.03 MW(49.5%) compared to before voltage control. And, power loss of parallel feeding system is reduced the average 0.08 MW(7.2 %) compared to the single feeding system. In conclusion, adaptive voltage control method using power conversion device can reduce power losses compared with existing method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.732-738
• /
• 2004

In this paper, we constructed 13 turns pancake coil and solenoid coil with HTS tape and measured AC losses of the pancake coil. The critical current of the pancake coil and the solenoid coil were 80A and 109A, respectively. To compare measured AC losses of the two coils, we carried out numerical analysis using 2-D FEM program for manufactured coils. This paper presents current density distribution, flux density distribution and AC losses of the pancake coil and the solenoid. As a result, we obtained that current density distribution was closely related to the orientation of magnetic field and distribution of AC losses were also closely related to the perpendicular component of flux density distribution in coil. The calculated AC losses of the two coils showed good agreement with measured AC losses and AC losses of the pancake coil was about 9 times bigger than that of the solenoid coil under the same turns and length.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1546-1551
• /
• 2008

This paper is concerned with the problems of accurate losses segregation in capacitor-run single phase motor. Segregation of losses in single phase induction motor is more complicated than that in three phase induction motor, because of the backward magnetic field component in the motor. Generally there are two methods for losses segregation of single phase induction motor. The one is relatively complicated method based on parameter estimation of single phase induction motor. By the way, the other one is simplified method based on IEEE Standard 114. All of the methods for the experimental determination of single phase induction motor losses are studied in this paper. Since the IEEE Standard is not possible to be applied for all type of single phase induction motors, we modified that method to apply for losses segregation of capacitor-run single phase induction motor as unifying the method based on parameter estimation.

• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.363-370
• /
• 2008

In this paper, three kinds of PWM strategies for a three-phase current-fed dc/dc converter are proposed and compared in terms of losses and voltage transfer ratio. Each PWM strategy is described graphically and their switching losses are analyzed. With the proposed PWM C strategy, one turn-off switching of each bridge switch is eliminated to reduce switching losses under the same switching frequency. In addition, RMS current through the bridge switches is lowered by using parallel connection between two bridge switches and thus, conduction losses of the switches are reduced. Further, copper losses of the transformer are decreased due to the reduced RMS current of each transformer's winding. Therefore, total losses are minimized and the efficiency of the converter is improved by using the proposed PWM C strategy. Digital signal processor (DSP: TI320LF2407) and a field-programmable gate array (FPGA: EPM7128) board are used to generate PWM patterns for three-phase bridge and clamp MOSFETs. A 500W prototype converter is built and its experimental results verify the validity of the proposed PWM strategies.

• Fisheries and Aquatic Sciences
• /
• v.23 no.9
• /
• pp.25.1-25.9
• /
• 2020

Fish is an extremely perishable food product which requires proper handling soon after harvest. The present study was aimed at assessing post-harvest fish losses and preservation practices in Siavonga district, Southern Zambia. Structured and semi-structured questionnaires were used to collect data on post-harvest fish losses and preservation practices from aquaculture producers, artisanal, and commercial fishers. All the fishers who landed on the lakeshore were interviewed, while aquaculture producers were randomly selected based on the information provided by the local department of fisheries. The results of the study revealed that all the fishers experienced post-harvest fish losses at varying degrees with those losing up to 10% of the total catch being in the majority. In contrast, aquaculture producers did not report any post-harvest fish losses. Most aquaculture producers commonly used chilling as preservation practice contrary to artisanal and commercial fishers who commonly used smoking and sun sun-drying respectively. Furthermore, fish product safety and quality control were poorly practiced in the district. Lack of cold storage facilities and fluctuating weather conditions were the major challenges impacting fish post-harvest activities. Therefore, to curb the loss of revenue due to post-harvest fish losses, we propose the introduction of new technology, self-development skills for fishing communities, and enhanced access to refrigeration facilities.

• Journal of Communications and Networks
• /
• v.4 no.2
• /
• pp.108-117
• /
• 2002

TCP, which was developed on the basis of wired links, supposes that packet losses are caused by network congestion. In a wireless network, however, packet losses due to data corruption occur frequently. Since TCP does not distinguish loss types, it applies its congestion control mechanism to non-congestion losses as well as congestion losses. As a result, the throughput of TCP is degraded. To solve this problem of TCP over wireless links, previous researches, such as split-connection and end-to-end schemes, tried to distinguish the loss types and applied the congestion control to only congestion losses; yet they do nothing for non-congestion losses. We propose a novel transport protocol for wireless networks. The protocol called VS-TCP (Variable Segment size Transmission Control Protocol) has a reaction mechanism for a non-congestion loss. VS-TCP varies a segment size according to a non-congestion loss rate, and therefore enhances the performance. If packet losses due to data corruption occur frequently, VS-TCP decreases a segment size in order to reduce both the retransmission overhead and packet corruption probability. If packets are rarely lost, it increases the size so as to lower the header overhead. Via simulations, we compared VS-TCP and other schemes. Our results show that the segment-size variation mechanism of VS-TCP achieves a substantial performance enhancement.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.2
• /
• pp.56-66
• /
• 1982

This study was carried out in order to estimate water losses in irrigation canals, which may be used to evaluate the water requirement for irrigation projects. The conveyance losses were measured by the inflow-outflow method, the seepage losses were measured by the ponding method, and the operation losses in the course of irrigation were calculated by comparing the two kinds of losses. The results obtained in this experiment were as follows; 1. Conveyance losses per unit area of wetted perimeter by the main irrigation canal, the secondary irrigation canal and the tributary irrigation canal, were 1.399${\times}10^{-5}m^3/sec/m^2$, 5.154${\times}10^{-5}m^3/sec/m^2$, and 2.67${\times}10^{-5}m^3/sec/m^2$ respectively in the Goong-sa area. And they were 1.934${\times}10^{-5}m^3/sec/m^2$, 2.149${\times}10^{-5}m^3/sec/m^2$, and 4.558${\times}10^{-5}m^3/sec/m^2$ respectively in the Seong-dug area. 2. Seepage losses per unit area of wetted perimeter by the secondary irrigation canal and the tributary irrigation canal, were 2.180${\times}10^{-6}m^3/sec/m^2$ and 2.168${\times}10^{-6}m^3/sec/m^2$ in the Goong-sa area, 1.150${\times}10^{-6}m^3/sec/m^2$ and 1.084${\times}10^{-6}m^3/sec/m^2$ in the Seong-dug area respectively. 3. Operation losses per unit area of wetted perimeter by the secondary irrigation canal and the tributary irrigation canal, were 4.936${\times}10^{-5}m^3/sec/m^2$ and 2.453${\times}10^{-5}m^3/sec/m^2$ in the Goong-sa area, 2.034${\times}10^{-5}m^3/sec/m^2$ and 4.450${\times}10^{-5}m^3/sec/m^2$ in the Seong-dug area respectively. 4. Conveyance, seepage and operation losses in the Goong-sa area were 6.7%, 94.6%, and 14.0% more than those in the Seong-dug area. Operation losses amount to about 17 times as much as seepage losses in the Goong-sa area and about 29 times in the Seong-dug area. 5. The seepage losses depend much on the soil texture, ranging from 7.437${\times}10^{-7}m^3/sec/m^2$ to 2.430${\times}10^{-6}m^3/sec/m^2$. 6. Water loss rates in the main irrigatin canal, the secondary irrigation canal and the tributary irrigation canal, were estimated as 8.49%, 37.27% and 9.81% respectively in the Goong-sa area. And they were estimated as 15.10%, 32.67% and 13.78% respectively in the Seong-dug area.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.11-14
• /
• 2003

The magnetization and self-field losses of the four technical high-T$_{c}$ superconducting tapes have been investigated experimentally. The results show that the magnetization losses for parallel or perpendicular fields can be well predicted from the slab model or the strip model for a filamentary region. However the magnetization losses for longitudinal fields can be rather predicted by the slab model for a decoupled filament. The self-field losses are well explained by the Norris ellipse model.l.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.133-142
• /
• 2011

When TCP operates in multi-hop wireless networks, it suffers from severe performance degradation due to the different characteristics of wireless networks and wired networks. This is because TCP reacts to wireless packet losses by unnecessarily decreasing its sending rate assuming the losses as congestion losses. Although several loss differentiation algorithms (LDAs) have been proposed to avoid such performance degradation, their detection accuracies are not high as much as we expect. In addition the schemes have a tendency to sacrifice the detection accuracy of congestion losses while they improve the detection accuracy of wireless losses. In this paper, we suggest a new sender-based loss differentiation scheme which enhances the detection accuracy of wireless losses while minimizing the sacrifice of the detection accuracy of congestion losses. Our scheme estimates the rate of queue usage which is highly correlated with the congestion in the network path between a TCP sender and a receiver, and it distinguishes congestion losses from wireless losses by comparing the estimated queue usage with a certain threshold. In the extensive experiments based on a network simulator, QualNet, we measure and compare each detection accuracy of wireless losses and congestion losses, and evaluate the performance enhancement in each scheme. The results show that our scheme has the highest accuracy among the LDAs and it improves the most highly TCP performance in multi-hop wireless networks.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.1
• /
• pp.2503-2519
• /
• 1972

The studies were carried out to find the cause and the quantitative evaluation of sea dike materials loss which is occured during the period of construction works for the tideland reclamation projects on the west coast of Korea. Major subjects to studies were to establish the typical relationships between the tidal flow and the movement of dike materials, the tidal-flow and the erosion, the dike materials and the ratio of material movement(losses), construction methods and the ratio of materials movement (losses). Based on the above subjects, the studies were made for the purpose of obtain the following informations; (1) Collecting and evaluaing the data of dike material losses due to foundation settlement, from designed existing dikes on the west coast. (2) By the field investigation at A-San Sea Dike, Pyong Taek Project, the Comparison would be made by the relationships between the tide velocity and the movement of dike foundation under the natural conditions and the period of construction so that find out the relationship between the dike materials of foundation situation and settlements. With regard to the dike construction works, it is so difficult to calculate the exact quantity of material losses due to the foundation settlements. The major factors that affect the settlement losses of the dike materials are: (1) Topographical variation (2) Swepting the sectional area of dike by the tide velocity. (3) Dumping riprap to the outerside of dike during the period of construction works. (4) Sectional area losses by the cause of occurence of the new tide channels. (5) material losses by the heavy storms. (6) Consolidation settlement by the foundation weakness. (7) Material losses by the earth materials by tide flow. Most hi호 material losses were occured by the Consolidation settlement due to the foundation weakness, the maximum tide velocities due to decrease the cross sectional area of the gaps and erosion of foundation due to the range of tide, Inner and outerside of dike, or dike material loses due to the tide flow. Final conclusion would be obtained by the continuous measurement of consolidation settlement at the stage of final clusure of the dike. (It is scheduled to close on the end of 1972) However, intermediate conclusion can be introduced as follows: (1) The estimation of material(losses) during the period of construction works for the existing sea-dikes up to date were only empirical. The material losses at the general closure for design was estimated at 10% of the riprap, 20% of the earth materials, and 20% of the riprap, 40% of the earth materials at the final closure of the dike. The final closure estimated double quantity to the general closure, but it is still doubt. (2) The ratio of consolidation settlements was found smaller than the calculated quantity. It can be foreseen that settlement speeds is higher thom the calculated speeds. (3) The movement of dike foundation under the natural conditions were not so depends on the geological conditions of the foundation. (4) When the tide velocities was estimated 100 at the normal tide, it was estimated 125 at the high tide and 55 at the low tide. The tide velocities at the low tide shows apparently lower than the high tide and the higher velocities at the deep water depth.