• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.10-24
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• 제5권1호
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Journal of Nutrition and Health
• /
• 제4권1호
• /
• pp.1-19
• /
• 1971

Nutritional anemia is an important nutritional problem affecting large population groups in most developing countries. Nutritional anemia is caused by the absence of any dietary essential involed in hemoglobin formation or by poor absorption of these dietary components. The most likely causes are lack of dietary iron, and folate, vitamin $B_{12}$ and high qualify protein. Anemia is considered to be a late mainfeastation of nutritional deficiencies, and even mild anemia is not the earilest sign of such a deficiency. Therefore, the object of therapy is to correct underlying deficiency rather than merely its manifestation. Iron deficiency anemia is generally much the most common form of anemia. And it is very prevalent particularly in pregnant women and young children, especially under five year of life. According to the rapid growth rate of infants, dietary iron should he provided for infants over three months of age in adequate amounts for the synthesis of hemoglobin required by the increasing blood volume and for the demands of newly formed cells. The principal causes of iron deficiency anemia are an inadequate dietary iron content, interference with absorption of iron from the intestine, excessive losses of iron from the body, disturbance of iron metabolism by infection, and social and cultural environments. The present study is planned to obtain informations concerning nutritional anemia through anthropometric and biochemical determinations for the assessment of nutriture in pre-school children. Determination was taken in 226 pre-school children in ruraI arae in 1968, 122 pre-school children in 1970, and 1526 hospitalized pre-school children in 1970. The results of this study are as follows; (1) According to Iowa Malnutrition Borderline (85 percentile) for weight, the proportions of underweighed pre-school boys and girls in rural area were 47.2% and 46.2% in1968, and were 36.1% and 51.8% in 1970. According to Iowa Malnutrition Borderline for height, the proportions of underheight boys and girls in rural area were 30.5% and 33.7%, and were 26.2% and 21.8% in 1970. Malnutrition scores of underweight for height values of boys and girls in rural area were 19.3 and 17.3 in 1968, and the scores of boys and girls were 15.6 and 15.5 in 1970. (2) The mean hemoglobin values of boys and girls in rural area were $11.2{\pm}1.8g/100ml\;and\;11.4{\pm}1.6g/100ml$ in 1968. In 1970, the mean values of boys and girls in rural area were $11.3{\pm}1.3g/100ml\;and\;11.7{\pm}2.4g/100ml$. The mean hemoglobin values of hospitalized boys and girls were $11.9{\pm}2.2g/100ml\;and\;11.7{\pm}2.4g/100ml$ in 1970. It is found that 92 of 215 children (42.7%) in rural area had concentrations of hemoglobin less than 11.0g/100ml in 1968. In 1970, 55 of 121 children (45.4%) in rural area and 559 of 1526 hospitalized children (36.6%) had concentrations of hemoglobin less than 11.0g/100ml. (3) The mean hematocrit levels of hospitalized boys and girls were $35{\pm}26.8%\;and\;35.4{\pm}6.4%$ in 1970. And 443 of 1334 hospitalized children (33.2%) had hematocrit values below 33%. (4) The average mean corpuscular hemoglobin concentration levels of hospitalized boys and girls were $32.4{\pm}2.2\;and\;32.3{\pm}2.2$ in 1970. And 1016 of 1352 hospitalized children (75.1%) had the mean corpuscular hemoglobin values below 34. (5) The mean iron values of young children in rural area and hospitalized children were $62.0{\pm}6.3{\mu}g/100ml\;and\;60.7{\pm}22.8{\mu}g/100ml$. The proportions of anemia cases below $50{\mu}g/100ml$ in rural area was 37.9%, and 34.3% in hospitalized children. (6) The mean total iron binding capacity of young children in rural area was $376{\pm}57.88{\mu}g/100ml,\;and\;342.2{\pm}6.15{\mu}g/100ml$ in hospitalized children. (7) The average transferrin saturation percentage of young children in rural area was $16.9{\pm}4.7%,\;and\;18.0{\pm}8.4%$ in hospitalized children. The proportions of anemia cases below 15% of young chi1dren in rural area and hospitalized children were 48.3% and 41.2%. Therefore, authors wish to recommend that the following further studies should be undertaken: (1) Standardization of simplied laboratory examination of nutritional anemia. (2) The prevalence of nutritional anemia and the requirements of iron, folate, and vitamin $B_{12}$ of pre-school children. (3) The content and absorption of iron in Korean food. (4) The pathogenesis of nutritional anemia and prevention of parasitic disease. (5) Maternal health and nutrition education.

• 지능정보연구
• /
• 제20권4호
• /
• pp.141-154
• /
• 2014

최근 재무제표분석을 통하여서 기업을 진단하려고 하는 다양한 학문적인 연구와 실질적인 적용이 실행되고 있다. 특히, 최근 새롭게 변경된 회계기준인 한국채택 국제회계기준(K-IFRS: Korea - International Financial Reporting Standards)에 따라서 제무제표분석에도 변화가 발생하고, 그에 따라서 기업 진단도 새롭게 변화되어야 하는 상황이 되었다. 이에 현재, 금융권에서도 관심을 갖고 있는 매출채권 처리의 변화에 따라서 발생하는 재무제표상의 진단 및 분석을 반영하여서 처리하는 새로운 진단모형의 필요성이 대두되었다. 특히, 최근 모뉴엘이라는 기업의 매출채권을 이용한 금융스캔들의 영향으로 이러한 연구가 더욱 활발하게 진행되고 있다. 매출채권은 일반적 상거래에서 발생하는 신용채권 으로서, 기업이 만기까지 보유하거나 만기 전에 양도가 가능한 금융 상품이다. 기업이 매출 채권을 할인하여 양도할 경우에 매출채권 할인을 매각거래로 처리하고, 할인료에 해당하는 금액을 매출채권처분 손실로 처리하며, 해당 거래를 우발 채무로 공시하였다. 그러나, K-IFRS 하에서는 모든 위험과 보상이 이전되지 않는 한 매출채권 할인을 차입거래로 인식한다. 이는 기업 부채의 증가로 기업가치에 영향을 미치게 된다, 이 논문에서는 매출채권 할인이 실질적으로 기업가치에 부정적인 영향을 미치는지 추정하는 지능형진단시스템을 제안한다. 본 논문에서는 매출채권 할인이 주가에 미치는 영향을 인공지능기법인 사례기반추론(case based reasoning)과 자기조직화지도 (self-organizing maps)기법을 통하여 진단 모형을 구축하였다.

• 한국가금학회지
• /
• 제44권4호
• /
• pp.253-258
• /
• 2017

본 연구의 목적은 옥수수와 대두박 배합사료에서의 직접법 또는 간접법으로 구한 조단백질 소화율을 비교하는 것과 조단백질 소화율의 가산성을 평가하는 것이다. 총 525수의 18일령 육계를 공시하여 체중을 기준으로 7개의 그룹으로 나눈 후, 6개의 처리구를 각 그룹에 난괴법으로 배치하였다. 기초사료(사료3)는 옥수수 65%와 대두박 28%를 포함하게 배합하였고, 사료1과 사료5는 옥수수와 대두박을 유일한 단백질의 공급원으로 하는 원료가 되게 배합하였다. 차이법을 사용하기 위하여 사료2와 사료4를 사료1과 사료5로부터 기초사료(사료3)를 옥수수와 대두박의 일부와 각각 대치시켜 배합하였다. 사료2는 옥수수 79%와 대두박 14%가 되게 배합하였고, 사료4는 옥수수 32.5%와 대두박 34%가 되도록 배합하였다. 가산성을 평가하기 위해, 사료2~4에서 측정한 값을 사료1과 사료5를 이용해 구한 옥수수와 대두박의 조단백질 소화율을 이용하여 계산한 예측값과 비교하였다. 직접법과 간접법으로 구한 소화율 값은 옥수수에서는 유의한 차이를 보이지 않았지만, 대두박에서는 직접법과 간접법 간의 유의한 차이를 보여주었다. 추가적으로 사료2와 사료3에서는 외관상 회장 소화율과 표준 회장 소화율 간에 유의적 차이를 보여 소화율의 가산성이 부족함을 보인 반면, 대두박의 조단백질 함량이 옥수수에 비해 더 높아 기초 내생 조단백질의 영향을 덜 받아서, 사료4의 외관상 및 표준 회장 조단백질 소화율 간의 유의적 차이가 나타나지 않았고, 소화율의 가산성을 만족함을 보여주었다. 본 실험을 통해 원료사료의 단백질 함량에 따른 소화율 값의 차이가 소화율 측정방법에 따라 다름을 확인되었으며, 이러한 결과는 육계 사료배합의 정밀성을 높이는데 이용될 수 있을 것으로 기대된다.

• 원예과학기술지
• /
• 제28권6호
• /
• pp.980-984
• /
• 2010

깻잎을 active MA 소포장 후 실온(약 $27^{\circ}C$)에서 호흡, 이취 관련 물질 및 신선도 유지효과에 관한 연구결과는 다음과 같다. 저장기간 중 호흡율은 무처리 및 저산소 처리구($CO_2:O_2:N_2$=6:2:92, 0:10:90) 보다 고산소 처리구(0:30:70 및 0:50:50)에서 높게 유지되었고, 에틸렌 발생도 다소 높았다. 그러나 이취관련 물질인 아세트알데히드 및 에탄올 발생은 고산소 처리구에서 현저하게 낮았다. 중량감소율은 무처리 및 저산소 처리구에서 약 1.8%, 고산소 처리구에서는 1.4%로 낮았지만, 저장 5일째는 유사한 경향을 나타냈다. Ascorbic acid 함량은 저장 1일에 13.3mg/100g F.W.이었고, 저장 3일에 무처리구에서 8.8mg/100g F.W.으로 가장 낮았으나, active MA 처리구에서는 커다란 차이 없이 저장기간이 길어짐에 따라 다소 감소하는 경향을 보였다. 엽록소 함량은 저장 5일째는 무처리구에서 47.5(SPAD-502 unit)로 가장 낮았고, active MA 처리구에서는 약 53.0 수준으로 높게 유지되었다. 관능 평가(시각)에서 저장기간 동안 서서히 감소되어 고산소 처리구(0:30:70 및 0:50:50)에서 저장 5일에 2.8로 상품성을 유지하였지만, 무처리 및 저산소 처리구에서는 상품성을 상실하였다. 이취발생은 저장 5일에 무처리구에서는 2.6으로 매우 낮았고, 고산소 처리구에서는 3.4 수준으로 높았다. 따라서 깻잎을 active MA 포장할 경우 실온에서(약 $27^{\circ}C$) 일반 MA포장 보다는 2일정도 더 신선도 유지효과가 있었다.

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.593-606
• /
• 2003

본 연구에서는 육계분과 제과부산물로 구성되는 반추가축용 TMR의 효과적인 제조 방법 모색을 위하여 총 5회의 실험을 수행하였으며, 각 실험의 내용은 다음과 같다. 실험 1: 퇴적발효 공법을 이용한 TMR의 소규모(1 ton) 제조. 실험 2: 퇴적발효 공법을 이용하여 제조된 TMR의 펠렛화. 실험 3: 퇴적발효 공법을 이용한 TMR의 현장 규모(15 ton) 제조. 실험 4: 혐기발효 공법을 이용한 TMR의 현장 규모(0.5 ton 타이콘백 이용) 제조. 실험 5: 육계분 단독 퇴적발효 후 급여 시 TMR 제조. 선별 육계분과 건조 제과부산물은 총가소화영양소(TDN) 함량이 69%(체중 200 kg의 육성 한우 요구량 충족)가 되도록 혼합되었으며, 각 실험별 처리에 따른 온도 변화, 외관적 특성 및 물리화학적 성분 변화를 분석하였다. 육계분에 제과부산물을 혼합함으로서 OM은 상당히 증가하였고(P<0.05), 과다한 단백질과 섬유소 함량은 육성우 요구량 수준으로 낮아지는(P<0.05) 등의 영양적으로 상호 보완적인 조화를 보였다. 실험 1과 3의 퇴적발효 공법 적용 시 발생된 발효열은 살균 효과를 충족시킬 정도로 상승하였으며, 공정 중의 화학적 성분상의 손실은 미미하였고, 표층의 공기 접촉 부위에 흰 곰팡이가 발생하고, 내부 고열로 인한 부분적 숯화(charring) 현상이 나타났다. 이의 펠렛화 시(실험 2) 단순 소형 펠렛기의 이용이 충분히 가능하였으며, 공정 중의 약간의 OM 손실과 ADF-CP 증가 현상이 수반되었다(P<0.05). 실험 4의 혐기발효 공법 적용 시 공정 간의 true protein : NPN 비율의 감소(P<0.05) 현상 이외에는 별다른 화학적 성분상의 차이는 없었으나, 한 달간의 발효기간만으로는 양호한 발효 성상을 보이지 못하였다. 실험 5의 육계분 단독 퇴적발효는 true protein : NPN 비율 감소(P<0.1), 섬유소 중 hemicellulose 함량 감소(P<0.05) 및 ADF-CP 함량 증가(고열로 인해)를 초래하는 경향이었고(P<0.1), 퇴적발효된 육계분을 급여 전에 제과부산물과 혼합하는 것도 위생적이고, 영양 보전적인 방법인 것으로 사료되었다.

• 한국환경농학회지
• /
• 제32권2호
• /
• pp.117-122
• /
• 2013

배는 국내 전체 과수 수출량의 74.6%를 차지하는 대표적인 과수인데, Venturia nashicola에 의한 배 검은별무늬병은 해마다 지속적으로 발생하며 큰 피해를 주고 있어 배 재배의 주요 애로사항으로 여겨지고 있다. 국내 배 재배면적의 82%를 차지하고 있는 신고 품종은 검은별무늬병에 민감한 품종으로서 이를 대체할 새로운 품종의 개발이 시급히 요구되고 있다. 배시험장에서는 2010년부터 검은별무늬병 이병률 포장 조사 및 실내검정을 통하여 환경 및 품종의 차이에 따른 저항성 기작을 연구하고 있다. 검정 결과, 우량계통 중 원교 나-55호가 3.3%의 이병률을 나타낸 것을 비롯하여, 원교 나-48호, 49호, 58호, 59호, 65호 등 6 계통이 15% 미만의 이병률을 나타내어 대조 품종인 신고가 기록한 이병률 69.4%보다 낮아 저항성 계통들로 여겨지는데, 일부 계통의 저항성은 서양배로 부터 도입된 저항성 유전자의 발현에 기인하는 것으로 판단된다. 광합성은 식물이 빛과 이산화탄소를 이용하여 유기물을 생산하는 과정이므로 식물의 광합성량과 양분합성량이 정비례할 것으로 예상되며, 생산된 양분은 과실 발달에 영향을 줄 것으로 판단하여 순간광합성량이 과실 특성에 미치는 영향을 조사하였다. 측정 결과, 원교 나-45호, 55호, 58호, 60호, 63호 등 5계통이 $18{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$ 내외의 값을 보여 다른 계통에 비해 순간광합성량이 많은 것으로 나타났고, 과실 특성을 조사한 결과, 원교 나-52호의 과중이 749 g, 원교 나-45호의 당도가 $16.2^{\circ}Bx$로 다른 계통에 비해 높게 나타났다. 그러나 순간광합성량에 따른 과실 특성의 변화가 관찰되지 않아 요인들 간에 상관관계를 밝혀낼 수 없었으며, 이를 통해 과실 품질은 품종 고유의 특성에 의하여 결정되는 것으로 밝혀졌다.

• 수산해양기술연구
• /
• 제27권1호
• /
• pp.1-12
• /
• 1991

적분방식에 의한 어군량추정법을 실험적으로 검증하기 위하여, 실험수조에서 50 kHz와 200 kHz의 주파수를 대상으로 모의어군의 분포밀도와 초음파산란강도의 관계를 검토하고, 또 계량어군탐지기의 정도를 개선하기 위한 문제들에 대하여 고찰을 행한 결과를 요약하면 다음과 같다. 1. 어체의 모의표적으로 이용한 steel ball (직영 35mm)의 실측 echo 파형은 이론 echo 파형과 잘 일치하였다. 2. 5 종류의 주파수에 대하여 고등어 (체장 36cm)의 반사주파수특성을 조사한 결과, 측정주파수가 변화함에 따라 어체에 의한 echo 신호의 진폭과 파형이 크게 변동하고 있음을 알 수 있었다. 3. 송수파기의 음속 내에서 5개/m 상(3)와 30개/m 상(3)의 표적 군이 서로 상하로 존재할 때, 상부 표적군의 존재에 의해 하부 표적군의 echo level이 -0.43 dB 감쇠하는, 소위 그늘효과(shadowing effect)가 발생하였다. 4. 동지나해에서 정박 중에 탐지한 고밀도 어군의 echo신호와 그 어군직하의 해저에서 산란된 echo 신호를 상호 연관시켜 분석한 결과, 어군층내에서 발생한 어군감쇠와 다중산란효과가 해저 echo 신호의 변동에 큰 영향을 미치고 있음을 알 수 있었다. 5. 정치망의 원통에 인망한 정어리의 단위체적당에 대한 분포밀도가 36마리/m 상(3)였을 때, 해저기녹이 소실되는 어군감쇠현상과, 어군 echo 신호가 해저까지 신장되는 다중산란현상이 동시에 발생하였다. 6. 50kHz와 200kHz의 주파수에서 표적군의 평균체적산란강도(:dB)와 표적의 분포밀도($\rho$:개/m 상(3))의 간에 다음의 회귀직선식을 얻었다. 50kHz : =-46.2+13.7 Log($\rho$). 200kHz : =-43.9+13.4 Log($\rho$). 7. 표적의 분포밀도가 5, 10, 15, 20, 25, 30 개/m 상(3)였을 때, 적분방식에 의한 추정치는 50kHz에서 2.0, 8.1, 9.9, 14.1, 19.2, 26.7 개/m 상(3)이었고, 200kHz에서는 2.0, 8.0, 9.1, 15.0, 20.1, 24.1 개/m 상(3)이었으며, 단위체적당에 분포하는 표적의 수가 많을수록, 그 추정치의 정도가 높아지는 경향을 나타내었다. 또한, 양주파수에서 분포밀도의 추정치는 실제보다 약 30%정도 과소추정되었다.