• 대한산업공학회지
• /
• 제36권3호
• /
• pp.154-163
• /
• 2010

Process monitoring of output variables affecting final performance have been mainly executed in semiconductor manufacturing process. However, even earlier detection of causes of output variation cannot completely prevent yield loss because a number of wafers after detecting them must be re-processed or cast away. Semiconductor manufacturers have put more attention toward monitoring process inputs to prevent yield loss by early detecting change-point of the process. In the paper, we propose the method to efficiently monitor functional input variables in multi-phase semiconductor manufacturing process. Measured input variables in the multi-phase process tend to be of functional structured form. After data pre-processing for these functional input data, change-point analysis is practiced to the pre-processed data set. If process variation occurs, key variables affecting process variation are selected using contribution plot for monitoring efficiency. To evaluate the propriety of proposed monitoring method, we used real data set in semiconductor manufacturing process. The experiment shows that the proposed method has better performance than previous output monitoring method in terms of fault detection and process monitoring.

• 한국통신학회논문지
• /
• 제15권1호
• /
• pp.71-79
• /
• 1990

逆바이어스 電壓變化에 따라 終端된 바랙터 리액턴스 變化로부터 發生되는 反射波의 連續的인 位相變化를 擴張시키기 위하여 인덕터와 바랙터를 直列로 連結시킨 回路와 하이브리드 링이 結合된 아나로그 移相器를 動作周波數 10GHz에서 設計하였으며, 分散特性 및 不連續 影響을 考慮하여 마이크로 스트립線路로 製作하였다. 實驗結果, 逆바이어스電壓을 20V가지 變化시킴에 따라 位相은 $52.34^{\circ}$에서 $235.01^{\circ}$까지 變化되므로서 $180^{\circ}$이상의 位相變化를 얻을 수 있었으며, 傳送 損失은 -3.6~14.3dB 및 Return loss는 -16~-18dB(1.37 < VSWR < 2.3)을 나타내었다.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.604-612
• /
• 2009

Water management has been recognized as a crucial factor for achieving better performance and stability in polymer electrolyte membrane fuel cells (PEMFCs). Proper water management should provide favorable water conditions, including the local humidity, membrane water content, and liquid water saturation in PEMFCs, thereby leading to more uniform electrochemical reaction and current generation. In this study, computational fluid dynamics (CFD) simulation was conducted to investigate the effects of the cathode relative humidity (RH) on the performance of a 3 by $3\;cm^2$ PEMFC with serpentine flow fields. The CFD results showed that the best performance of the PEMFC was obtained for the cathode RH of 80%, but the performance variation was small for the cathode RH range of $60{\sim}100%$. However, the loss of the PEMFC performance was significant when the cathode RH was reduced below 40%. The reason for such performance variation was investigated through the detailed inspection of ohmic loss, activation and concentration overpotential, and water and current distributions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권10호
• /
• pp.4015-4033
• /
• 2015

The future mobile networks consist of hyper-dense heterogeneous and small cell networks of same or different radio access technologies (RAT). Integrating mobile networks of different RATs to provide seamless and smooth mobility service will be the target of future mobile converged network. Generally, handover from high-speed networks to low-speed networks faces many challenges from application perspective, such as abrupt bandwidth variation, packet loss, round trip time variation, connection disruption, and transmission blackout. Existing inter-RAT handover solutions cannot solve all the problems at the same time. Based on the high-layer convergence sublayer design, a new receiver-aided soft inter-RAT handover is proposed. This soft handover scheme takes advantage of multihoming ability of multi-mode mobile station (MS) to smooth handover procedure. In addition, handover procedure is seamless and applicable to frequent handover scenarios. The simulation results conducted in UMTS-WiMAX converged network scenario show that: in case of TCP traffics for handover from WiMAX to UMTS, not only handover latency and packet loss are eliminated completely, but also abrupt bandwidth/wireless RTT variation is smoothed. These delightful features make this soft handover scheme be a reasonable candidate of mobility management for future mobile converged networks.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5512-5517
• /
• 2012

본 논문에서는 만족스런 서비스 품질을 제공하는 페트리 네트 기반의 멀티미디어 동기화 모델을 제안한다. 제안한 모델은 실시간 특징을 나타내는 데이터의 서비스 품질을 보장할 수 있는 가변적 버퍼를 적용하였다. 본 논문은 동기화 구간 조정을 처리하기 위해 지연 지터를 적용함으로써 트래픽 증가로 인한 미디어 데이터의 손실 시간 및 지연시간의 변화로 인한 데이터 손실을 감소시켰다. 그리고 스무딩 버퍼의 대기 시간을 가변으로 처리함으로써 지연시간의 변화로 인한 불연속을 감소시켰다. 제안된 논문은 고품질 서비스의 보장을 요구하는 시스템에 적합하며, 재생율 증가와 손실율 감소 등 서비스 품질을 향상시켰다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권7호
• /
• pp.345-351
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load, the oscillation can be severe and even increase largely and finally the out-of-step condition may un. During the power swing and out-of-step conditions, the apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• 전자공학회논문지D
• /
• 제36D권9호
• /
• pp.50-55
• /
• 1999

단일모드 광섬유의 한쪽 측면을 코어 가까이 연마한 광섬유와 그 위에 덮혀진 정합액 사이의 광결합을 이용한 가변 광 감쇠기를 제안하였다. 광섬유모드와 방사모드사이의 결합으로 인하여 정합액의 미세한 굴절률 변화는 큰 광손실의 변화를 발생시킨다. 정합액의 열광학 효과를 이용하여 광손실을 제어하였다. 실리콘 V홈을 이용하여 측면 연마된 광섬유 블록(block)을 제작하였다. 실험결과 $5^{\circ}C$ 정도의 온도변화로서 감쇠량을 최대와 최소사이에서 제어 할 수 있었다. 제작된 소자의 편광의존성 손실은 0.5 dB이었고, 삽입 손실은 0.2dB 이었다.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.9-20
• /
• 2012

This paper proposes the efficiency optimization control of interior permanent magnet synchronous motor(IPMSM) drive using series connected-fuzzy neural network PI(SC-FNPI) controller. The PI controller is generally used to control IPMSM drive in industrial field. However, the PI controller has problem which is falling control performance about parameter variation such as command speed, load torque and inertia due to fixed gain of PI controller. Therefore, to improve performance of PI controller, this paper proposes SC-FNPI controller adjusted input of PI controller by FNN controller according to operating conditions. Also, this paper proposes efficiency optimization control which is improving efficiency with minimize loss. The SC-FNPI controller proposed in this paper is compared control performance with conventional FNN and PI controller about command speed, load torque and inertia variation. And the efficiency optimization control is compared with $i_d=0$ control about loss and efficiency. The SC-FNPI controller proposed in this paper shows more excellent control performance for rising time, overshoot and steady-state error. Also efficiency optimization control is increased efficiency by reducing loss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load the oscillation can be severe and even increase largely and finally the out-of-step condition may occur During the power swing and out-of-step conditions, the a apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• 대한전자공학회논문지TC
• /
• 제38권10호
• /
• pp.24-33
• /
• 2001

패킷 통신에 있어서 주요 서비스 품질(QoS : Quality of Service) 요소로는 지연(delay), 지연 변이(delay variation), 패킷 손실율(loss rate) 등이 있다. 본 논문에서는 복수의 논리적 버퍼가 하나의 메모리 버퍼를 공유할 때, 논리버퍼의 손실율 성능을 향상시키기 위한 새로운 버퍼 할당 기법을 제안한다. 제안된 예방적 적응 한계치(PAT : Preventive Adaption Threshold) 버퍼 할당 기법은 기존의 동적 한계치 (Dynamic Threshold)기법에서 사용하는 패킷 폐기 한계치(threshold)의 직선적 변화 궤적과는 다른 한계치 동적 변화 궤적을 사용함으로써 패킷 손실율 성능을 개선하였다. 제안된 기법의 성능을 평가하기 위하여 기존의 무제어(NC : No Control), 고정 한계치(ST : Static Threshold), 동적 한계치(DT : Dynamic Threshold)등의 기법과 여러 측면에서 손실율 성능을 비교하였다.