• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.133-140
• /
• 2002

This paper aims to investigate the effect of silicone oils as processing agent affecting the loss and recovery of hydrophobicity. The recovery of hydrophobicity was evaluated by the measurement of the surface electrical resistivity and the contact angle on the SIR surface. Two kinds of silicone oils (1 and 2) having different molecular weight were selected under a consideration of hydrophobicity and processability. SIR specimens were exposed to corona discharges in air and the specimens were analyzed with contact angle and surface resistance measurements. It was observed that the contact angle and the surface resistivity of SIR increase gradually with testing time. The fast recovery of hydrophobicity of SIR, expressed by the increment of contact angle and surface resistivity, was showed in SIR2 containing silicone oil 2.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.190-195
• /
• 2005

A Femur is the longest and largest bone which supports body in human musculoskeletal structure. Therefore, it may cause heavy loss of blood when it is suffered by a simple or complex fracture, and the complication is very dangerous with a possibility of severe tissue damage. In this study, the femoral cancellous angle change is estimated in order to design the Korean femoral IM nail. Generally, it is various in the size and curvature of femoral cancellous bone depending on patient's body dimension. Therefore surgeon has difficulty in fitting this femoral IM nail to the patient in the surgical procedure. In our study, we tries to estimate femoral lateral curve angle with more precise method based on CT image of the femur and utilize this information on the design of femoral IM nail for Korean patients.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.95-97
• /
• 2005

Loss in the multi-stacked HTS wires are affected by a number of factor, such as, number of wires used in the stack, direction of external magnetic field and insulation thickness between the wire. This paper examines the effects of the insulation thickness on the magnetization loss of the multi-stacked YBCO coated conductor. Measurements of magnetization loss were performed using 4 different typo of multi-stacked wires and under various angle of external magnetic field. Test results show that loss density per unit volume increased for YBCO coated conductors when thickness of insulation increased. Loss density per unit volume decreased for YBCO coaled conductors when stacking number of tapes increased.

• 천문학회보
• /
• 제37권1호
• /
• pp.90.2-90.2
• /
• 2012

Geosynchronous electron flux dropouts are most likely due to fast drift loss of the particles to the magnetopause (or equivalently, the "magnetopause shadowing effect"). A possible effect related to the drift loss is the radial diffusion of PSD due to gradient of PSD set by the drift loss effect at an outer L region. This possibly implies that the drift loss can affect the flux levels even inside the trapping boundary. We recently investigated the details of such diffusion process by solving the diffusion equation with a set of initial and boundary conditions set by the drift loss. Motivated by the simulation work, we have examined observationally the energy spectrum and pitch angle distribution near trapping boundary during the geosynchronous flux dropouts. For this work, we have first identified a list of geosynchronous flux dropout events for 2007-2010 from GOES satellite electron measurements and solar wind pressures observed by ACE satellite. We have then used the electron data from the Time History of Events and Macroscale Interactions during Substorms (THEMIS) spacecraft measurements to investigate the particle fluxes. The five THEMIS spacecraft sufficiently cover the inner magnetospheric regions near the equatorial plane and thus provide us with data of much higher spatial resolution. In this paper, we report the results of our investigations on the energy spectrum and pitch angle distribution near trapping boundary during the geosynchronous flux dropout events and discuss implications on the effects of the drift loss on the flux levels at inner L regions.

• 한국식품저장유통학회지
• /
• 제4권2호
• /
• pp.163-171
• /
• 1997

This study was undertaken to investigate changes m curve angle of Chinese cabbage blade during salting at various concentration(10, 15, 20, 25%) of salt to evaluated salting degree by curve angle during salting at 20$^{\circ}C$. Salt concentration of brine, the amount of water elution, salt penetration of the tissue(salt concentration of Chinese cabbage), weight loss and texture were investigated. Correlation relation between the above factors and curve angle were determined. The curve angles by method of holding the edge of the Chinese cabbage blade was measured. The curve angles of the mesophyll were proportional to salting time and salt concentration, but slope of line equation showed higher than that of mid-rib. The ideal method of salting evaluation by curve angle was MCA-MRC (the measuring curve angle of mid-rib C) at each concentration of salt. The results of curve angle when reached 3% salt of Chinese cabbage tissue calculated by MCA-MRC at 10, 15, 20 and 25% salting were 57$^{\circ}$, 43$^{\circ}$, 36$^{\circ}$, and 33$^{\circ}$, respectively. And salting times calculated by the same conditions were 19, 12.5, 9.1 and 4.4hours, respectively.

• 대한전자공학회논문지SD
• /
• 제39권2호
• /
• pp.46-55
• /
• 2002

광도파로열 격자(AWG :Arrayed Waveguide Grating) 파장 필터는 전광 네트웍(All Optical Network)을 실현하는 매우 중요한 핵심 소자 중에 하나이다. 광도파로열 격자 파장 필터와 같은 광도파 소자를 해석 및 설계시 수학적인 해석이 필요하며, 가장 대표적인 방법은 BPM(Beam Propagation Method)이다. 본 논문에서는 Paraxial BPM과 Wide Angle BPM을 InP/InGaAsP/InP 광도파로열 격자 파장 필터 해석에 적용시켜 정화도의 차이를 고찰해 보았다. WA-BPM을 구현하기 위하여 저차의 Pade Approximant를 적용하였다. 광도파로열 격자 파장 필터의 SLL(Side Lobe Level)과 삽입손실(Insertion Loss)을 비교하여 분석하였다. 광도파로열 격자 파장 필터를 정확하게 해석 및 설계하기 위해서는 고차의 WA-BPM을 사용해야 함을 확인하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.391-396
• /
• 2000

Today most companies are designing their automobile shapes by using 3 dimensional CAD software, CATIA. And they used to design 2 dimensional press dies to do some elastic work on their products, but they are currently trying to make use of dimensional software, Pro-Engineer. In this case, they have to change the 3 dimensional product design data to the proper format data for the following process. This paper will show the data loss and the deformation during data transfer between CATIA and Pro-Engineer, and then suggest a solution for these problems. Product's surface will be automatically placed by automatic press tipping angle setting in CATIA to prevent the product from being stuck in the press die. The 2 dimensional section view which is based on the tipping angle setting is created by Z-map. And, to remove the data loss and the data deformation in pro-Engineer, the product surface are delivered to the next process after it is changed to the 2 dimensional Z-map curves in CATIA. finally, this paper suggests an algorithm to develop the automatic design program for the press layout which regenerates product shape surface from the previous process.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.76-81
• /
• 2007

The objective of this study is to find the optimum design of a snubber using CFD analysis. Several dimensions such as snubber height(H), snubber diameter(D), buffer width and buffer angle are considered in this study. The present study shows that the CFD can be applied to study the pressure characteristics inside the snubber. The objective of the snubber design optimization are to minimize a pressure loss and the pulsation ratio. Numerical results such as particle track, pressure distribution and turbulent kinetic energy are used to analyze the critical area and pressure behavior inside the snubber. As a result, snubber model with H/D ratio of 3.23 and buffer angle of $40^{\circ}$ has a minimum pressure loss. On the other hand, snubber model with H/D ratio 4.41 and buffer angle $10^{\circ}$ has a minimum pulsation ratio.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.38-44
• /
• 2002

Today most companies are designing their automobile shapes by using 3 dimensional CAD software, CATIA. And they used to design 2 dimensional press dies to do some elastic work on their products, but they are currently trying to make use of 3 dimensional software, Pro-Engineer. In this case, they have to change the 3 dimensional product design data to the proper format data for the following process. This paper will show the data loss and the deformation during data transfer between CATIA and Pro-Engineer, and then suggest a solution for these problems. Product's surface will be automatically placed by automatic press tipping angle setting in CATIA to prevent the product from being stuck m the press die. The 2 dimensional section view which is based on the tipping angle setting is created by Z-map. And, to remove the data loss and the data deformation in Pro-Engineer, the product surface are delivered to the next process after it is changed to the 2 dimensional Z-map curves in CATIA. Finally, this paper suggests an algorithm to develop the automatic design program for the press layout which regenerates product shape surface from the previous process.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3140-3153
• /
• 2022

A numerical feasibility study was conducted to investigate the thermal-hydraulic characteristics of a steam generator with corrugated plates for a small modular reactor. Accordingly, a one-dimensional thermal-hydraulic analysis code was developed based on the existing state-of-the-art thermal-hydraulic models and correlations for corrugated plate heat exchangers. Subsequently, the pressure loss, heat transfer, and instability characteristics of the steam generator with corrugated plates were investigated according to the chevron angle and mass flux. Additionally, the characteristics of rectangular and disk-type corrugated plate steam generators with equivalent heat transfer areas were analyzed. The steam generator with disk-type corrugated plates exhibited better performance in terms of pressure loss and heat transfer rate than the rectangular type. In addition, when the mass flux decreased from the onset of boiling points, reverse gradients of the total pressure change were observed in both types. Thus, it was confirmed that Ledinegg instability could occur in the steam generator with corrugated plates. However, it was dependent on the chevron angle, and the optimal chevron angle to minimize instability was 45° under the conditions of the present analysis.