• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.216-219
• /
• 2013

In this paper, the influence of inverter switching harmonics on iron loss and PM loss of Permanent Magnet Synchronous Motor (PMSM) is numerically investigated by Finite Element Method (FEM). In particular, nonlinear FEM is applied for a multi-layered PM Synchronous Motors (PMSMs), Interior buried PMSM (IPMSM) and PM assisted Synchronous Reluctance Motor (PMa-SynRM), which are adoptively designed and compared for Electric Vehicle (EV) propulsion. In particular, iron loss and PM eddy-current loss under the real current waveform including the carrier harmonics from inverter switching are numerically analyzed with nonlinear FEM by considering the skewed stator structure employed for minimizing spatial harmonics.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.113-121
• /
• 2013

This paper introduces a simple core loss calculation method for output filter inductor in pulse width modulation (PWM) DC-AC inverter. Amorphous C-core (AMCC-320) is used to analyze the core loss. In order to measure core loss of the output filter inductor and validate the proposed method, a single-phase half-bridge inverter and a calorimeter are used. By changing switching frequency and modulation index (MI) of the inverter, core loss of the AMCC-320 is measured with the lab-made calorimeter and the results are compared with calculated core loss. The proposed method can be easily extended to other core loss calculation of various converters.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.268-275
• /
• 2013

This paper shows the characteristics of performance for interior permanent magnet machine (IPM) considering driving conditions such as maximum torque per ampere (MTPA) and flux-weakening control especially in terms of harmonic loss. In particular, based on finite element analysis (FEA), permanent magnet (PM) eddycurrent loss and the harmonic iron loss have been computed where the models have been intentionally designed to identify the effects of pole-slot combinations on the loss while maintaining the required power for electric vehicle. From the analysis results, it was shown that the rotor iron loss and PM eddy-current loss of machine employing fractional slot winding are extremely large at load condition. Furthermore, it was revealed that the harmonic iron loss at high-speed operation is mainly distributed over stator teeth and rotor surface, which may aggravate cooling system of the rotor structure in the vehicle.

• Genomics & Informatics
• /
• v.16 no.4
• /
• pp.20.1-20.20
• /
• 2018

Genetic hearing loss crosses almost all the categories of hearing loss which includes the following: conductive, sensory, and neural; syndromic and nonsyndromic; congenital, progressive, and adult onset; high-frequency, low-frequency, or mixed frequency; mild or profound; and recessive, dominant, or sex-linked. Genes play a role in almost half of all cases of hearing loss but effective treatment options are very limited. Genetic hearing loss is considered to be extremely genetically heterogeneous. The advancements in genomics have been instrumental to the identification of more than 6,000 causative variants in more than 150 genes causing hearing loss. Identification of genes for hearing impairment provides an increased insight into the normal development and function of cells in the auditory system. These defective genes will ultimately be important therapeutic targets. However, the auditory system is extremely complex which requires tremendous advances in gene therapy including gene vectors, routes of administration, and therapeutic approaches. This review summarizes and discusses recent advances in elucidating the genomics of genetic hearing loss and technologies aimed at developing a gene therapy that may become a treatment option for in the near future.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.555-560
• /
• 2022

In this study, the insertion loss and phase delay according to the multi-layer structure radome parameters were analyzed using the boundary value solution approach, and the multi-layer structure and hexa mesh structures with low-loss electrical characteristics for the Ku-band transmission/reception frequency of 10.7 ~ 14.5 GHz were designed and manufactured. A hexa mesh was applied to minimize radio wave transmission and scattering, which lowered the transmittance refractive index according to the radio incident angle and minimized dielectric loss through high-density foam. Similar to the simulation result, the transmission loss obtained the gain in a specific receiving frequency band, and in the transmission frequency band, an excellent low loss characteristic was obtained with an insertion loss of 0.8dB or less. The results of this study can be used in radio transmission radomes of low-weight, low-cost end-system protection devices.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.66-72
• /
• 2023

Little attention appears to have been paid to the relevance of learning a good representation function in solving long tail tasks. Therefore, we propose a new loss function to ensure a good representation is learnt while learning to classify. We call this loss function Triplet Class-Wise Difficulty-Based (TriCDB-CE) Loss. It is a combination of the Triplet Loss and Class-wise Difficulty-Based Cross-Entropy (CDB-CE) Loss. We prove its effectiveness empirically by performing experiments on three benchmark datasets. We find improvement in accuracy after comparing with some baseline methods. For instance, in the CIFAR-10-LT, 7 percentage points (pp) increase relative to the CDB-CE Loss was recorded. There is more room for improvement on Places-LT.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.77.3-78
• /
• 2021

Measuring radiative loss from the solar chromospheric lines like Ha line, Ca II 8542 line helps to infer the exact amount of non-thermal heating in the solar atmosphere. By courtesy of the multi-layer spectral inversion, it is able to determine the radiative loss in the upper and lower chromosphere. Consequently, we found that the radiative loss is around 10 kW/m², which is consistent with previous studies. Comparing the radiative loss at the upper and lower chromosphere, the loss at the lower chromosphere is larger than that of upper chromosphere and tends to spread all over the field of view while the loss in the upper chromosphere tends to be localized. We hope to find a hint for specific non-thermal heating process to explain the chromospheric radiative loss.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.261-268
• /
• 2009

This study accomplished to draw a soil erosion map and a grade map of soil loss hazard in Korea. RUSLE and Rainfall-runoff (R) factor, which was estimated by using the rainfall data observed in 59 meteorological stations from 1977 to 2006 (for 30 years). FARD was used to analyze the frequency, and the whole country R factor was estimated according to the frequency. In the analysis of estimating the whole country R factor, Nakdong river has the smallest vaule, but Han river has the biggest value. According to the result of analyzing soil loss, soil loss occurred in a grass land, a bare land and a field in size order, and also approximately 17.2 ton/ha soil loss happened on the whole area. The average soil loss amount by the unit area takes place in a bare land and a grass land a lot. The total amount of soil loss in 5-year-frequency rainfall yields 15,000 ton and, what is more, a lot of soil loss happens in a paddy field, a forest and a crop field. The grade map of soil loss hazard is drawn up by classifying soil loss hazard grade by 5. As a result of analyzing soil loss, the moderate area which is the soil loss hazard grade 2 takes up the largest part, 72.8% of the total soil loss hazard area, on the contrary, the severe soil loss hazard area takes up only $1,038km^2$ (1.1%) of the whole area. The severe soil loss hazard area by land cover shows $93.5km^2$ in a bare land, $168.1km^2$ in a grass land and $327.4km^2$ in a crop field respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.441-448
• /
• 2018

Recently, measurements on clutter loss due to buildings in urban/suburban areas at 3, 6, 10, 18, and 24 GHz have been performed by the Radio Research Agency with the purpose of predicting the clutter loss close to actual urban/suburban propagation for 5G mobile communication. In this work, we have compared the urban clutter loss to suburban clutter loss for a transmit antenna height of 85 m. Furthermore, we have estimated the error between the predicted loss as per ITU-R P.2108 and the measured clutter loss. Our results indicate that for higher frequencies, the measured clutter loss in urban/suburban areas is higher and so lower than the predicted clutter loss. In conclusion, it is necessary to improve the prediction model for clutter loss by taking into account the measured clutter loss in urban/suburban areas in the prediction model.