• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• 대한교통학회지
• /
• 제13권4호
• /
• pp.133-151
• /
• 1995

The collective of highly reliable traffic data is necessary for traffic signal control. This study is to test application of RTMS sensor to traffic signal control. In order to find out the possibility of its application th traffic signal control, 5 types of experiments were performed. The major findings are as follows ; -The detection are a has been changing according to degree and gain. -At the results of experiments for interference are a measure, Degree 60 is stable condition. -At the results of reliability test for volume and speed. the error rate decreases as speed increases and that of Zone 1 is lower than that of Zone 3. -Two modes are set up for reliability test of traffic volume. It founds that the detection reliability of the stopped vehicles are higher than that of the passing vehicles at sidefire-intersection mode. It founds that the results are vice-versa at sidefire-highway mode. Conclusively, this sensor cannot directly apply to colection of traffic data for traffic signal control. However, this sensor can be substituted for a loop detector which is used popularly for signal control, and freeway traffic control if above faults are made up.

• Smart Structures and Systems
• /
• 제14권3호
• /
• pp.347-365
• /
• 2014

The main objective of this paper is to develop an innovative methodology for the vibration suppression control of the multiple degrees-of-freedom (MDOF) flexible structure. The proposed structure represented in this research as a clamped-free-free-free truss type plate is rotated by motors. The controller has two loops for tracking and vibration suppression. In addition to stabilizing the actual system, the proposed feedback control is based on a genetic algorithm (GA) to seek the primary optimal control gain for tracking and stabilization purposes. Moreover, input shaping is introduced for the control scheme that limits motion-induced elastic vibration by shaping the reference command. Experimental results are presented, demonstrating that, in the control loop, roll and yaw angles track control and elastic mode stabilization. It was also demonstrated that combining the input shaper with the proportional-integral-derivative (PID) feedback method has been shown to yield improved performance in controlling the flexible structure system. The broad range of problems discussed in this research is valuable in civil, mechanical, and aerospace engineering for flexible structures with MDOM motion.

• Structural Engineering and Mechanics
• /
• 제21권2호
• /
• pp.185-204
• /
• 2005

Variations in system parameters due to uncertainties may result in system performance deterioration. Uncertainties in modeling of structures are often considered to ensure that control system is robust with respect to response errors. Hence, the uncertain concept plays an important role in vibration control of the engineering structures. The paper discusses the robustness of the stability of vibration control systems with uncertain parameters. The vibration control problem of an uncertain system is approximated by a deterministic one. The uncertain parameters are described by interval variables. The uncertain state matrix is constructed directly using system physical parameters and avoided to use bounds in Euclidean norm. The feedback gain matrix is determined based on the deterministic systems, and then it is applied to the actual uncertain systems. A method to calculate the upper and lower bounds of eigenvalues of the close-loop system with uncertain parameters is presented. The lower bounds of eigenvalues can be used to estimate the robustness of the stability the controlled system with uncertain parameters. Two numerical examples are given to illustrate the applications of the present approach.

• 한국지능시스템학회논문지
• /
• 제5권3호
• /
• pp.64-72
• /
• 1995

본 논문에서는 공정제어계의 PI제어기의 이득을 동조하는 방법을 다룬다. 산업계에서 사용되고 있는 제어기는 PI형이고, 이의 이득은 숙련조업자에 의하여 시행착오법으로 조정되고 있다. 따라서 제어기의 동조에는 많은 시간과 노력이 소요되며 다중루프를 갖는 공정의 경우에는 동조하기가 매우 어려운 실정이다. 본 논문에서는 다루는 퍼지동조기는 아래와 같은 가정하에서 개발되었다. 제어기는 아나로그 PI제어기이고 플랜트의신호는 On-line으로 받지만 동조는 off-line에서 이루어진다. 또한 동조를 위한 특징량을 플랜트로 부터 얻을 수 있어야 한다. 동조 방법은 퍼지논리를 사용하였으며, 개발된 퍼지동조기는 공정의 현재신호와 과거의 상태를 보여주며 동조된 새로운 PI제어기의 이득값을 제시한다. 퍼지동조기는 현장에서 여러실험을 통하여 성능을 검증하였다.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.401-408
• /
• 2000

본 논문에서 제안한 제어기 구조는 일반적인 궤환제어기를 기초로 구성한다. 일반적인 궤환제어기는 플랜트 입력과 기준신호 사이의 오차에 제어기의 적당한 이득을 곱한 제어입력을 공급한다. 설계한 궤환 퍼지제어는 3개의 루프로 구성되며, 내부 루프는 보통의 궤환제어기와 플랜트로 구성된다. 제어기는 퍼지 모델링과 퍼지추론기로 이루어진 외부 루프에 의해서 조절되며 제안한 궤환 퍼지 시스템의 출력이 기준신호를 향해서 잘 수렴하는가를 확인하기 위해 직접구동 밸브를 사용한 비선형 유압 서보시스템을 제어대상으로 부동 소수점 DSP 프로세서를 사용하여 구현한 후 실험결과를 관찰하였다. 실험결과 궤환 퍼지제어기는 정상상태 도달시간은 느리지만 오버슈트나 언더슈트는 일어나지 않는다. 그러므로 새로운 궤환제어 방식을 사용한 궤환 퍼지제어 알고리즘이 비선형 플랜트에 효과적으로 잘 적응됨을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권4호
• /
• pp.102-112
• /
• 1992

The three-phase full(6-pulse) bridge controlled rectifier is one of the most widely used types of solid-state converters in DC drive applications for higher performance. In most of the previous designs, the gate control circuits of the converter have been designed with analog method which can be easily affected by noise. Nowdays with advances of microelectronics and power electronics, microprocessor and pheripal LSIs are increasingly used for eliminating this problems. In this paper, a novel general-purpose microprocessor -based firing system and control scheme for a three-phase controlled rectifier bridge has been developed and tested. Using the phase relations between ${\Delta}$-Y transformer in power operation part, gate pulse of the converter is generated with real time process so that microprocessor may share its time to control algorithms efficiently. The firing angle of the converter is smoothly controlled in the range of 0 $^{\dirc}$ to 180$^{\dirc}$ with a fast respone and a constant open loop gain, even for the case where the converter is fed by a weak AC system of unregulated frequency. The hardware and software control circuit implementation built around a 80286 microprocessor is discussed, and the experimental results are given. This scheme uses less hardware components and has higher dynamic performance in variable speed DC drive applications.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.753-763
• /
• 2015

This paper proposes a decentralized robust adaptive neural network control scheme using multiple radial basis function neural networks for electrically driven robot manipulators with bounded input voltages in the presence of uncertainties. The proposed controller considers both robot link dynamics and actuator dynamics. Practically, the controller gain coefficients applied at each joint may be nonlinear time-varying and the input voltage at each joint is saturated. The proposed robot controller overcomes the various uncertainties and the input voltage saturation problem. The proposed controller does not require any robot and actuator parameters. The adaptation laws of the proposed controller are derived by using the Lyapunov stability analysis and the stability of the closed-loop control system is guaranteed. The validity and robustness of the proposed control scheme are verified through simulation results.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.98-104
• /
• 2013

본 논문에서는 무선 통신 및 근거리 위치 인식이 가능한 WBAN(wireless body area network) 용 UWB(Ultra-wide band) 수신기 회로를 제안한다. UWB 수신기는 에너지 검출 방식의 OOK(on-off keying) 변조가 가능하도록 설계가 되었다. 고속의 sampling 을 하기 위해서 4bit ADC 는 DLL(delay locked loop) 을 이용하여 sub-sampling 기법을 사용하도록 설계되었다. 제안된 UWB 수신기는 CMOS $0.18{\mu}m$ 공정을 이용하여 설계되었으며, 전원 전압 1.8V에서 61mA의 전류를 소모하면서 -85.7dBm의 수신 감도, 42.1dB의 RF front-end 게인, 3.88 dB의 noise figure, 최대 4m 까지의 거리 감지 성능을 가지고 있다.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.621-630
• /
• 2006

The T-50 advanced trainer aircraft combines advanced aerodynamic features and a fly-by-wire flight control system in order to produce a stability and highly maneuverability. The flight control system both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 employs the RSS concept in order to improve the aerodynamic performance in longitudinal axis and the longitudinal control laws employ the dynamic inversion with proportional-plus-integral control method. And, lateral-directional control laws employ the blended roll system both beta-betadot feedback and simple roll rate feedback with proportional control method in order to guarantee aircraft stability. This paper details the design process of developing lateral-directional control laws, utilizing the requirement of MIL-F-8785C and MIL-F-9490D. And, this paper propose the analysis of aircraft characteristics such as dutch-roll mode, roll mode, spiral mode, gain and phase margin about gains for lateral-directional inner loop feedback.