• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.61-74
• /
• 1998

The Purpose of this study was to investigate the stress distribution and tooth displacement at the initial phase produced by 5 types of molar uprighting springs using finite element method. The three dimensional finite element model of lower dentition, bone and springs was composed of 5083 elements and 2071 nodes. The results were as follows: 1. In case of helical spring and root spring, intrusion of lower canine and first premolar were observed md distal tipping, translation and extrusion of lower second molar were observed. 2. In case of T-loop, modified T-loop and box loop, intrusion and distal translation of lower second premolar were observed, and the largest crown distal tipping and translation of lower second molar were observed in T-loop and the smallest were observed in box loop. 3. In case of T-loop with cinch-bact crown distal tipping and translation of lower second molar were decreased, but extrusion was also decreased. 4. With increase of activation in T-loop, mesial translation and won distal tipping of lower second molar were increased and edentulous space was closing, but distal translation of second premolar was also increased. 5. With increase of tip-back bend in T--loop, distal tipping and translation of lower second molar were increased, but extrusion was also increased more largely.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1296-1297
• /
• 2011

This paper deals with a power-hardware-in-the loop simulation (PHILS) of permanent magnet synchronous generator (PMSG) type wind power generation system (WPGS) using a real hardware which consists of a motor generator set with motor drive, real time digital simulator (RTDS), and back-to-back converter. A digital signal processor (DSP) controls the back-to-back converter connected between the back-to-back converter and the RTDS. The proposed PHILS can effectively be applied to demonstrate the operational characteristics of PMSG type WPGS under grid connection.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.363-370
• /
• 2015

In this paper, the control technique of the stepping motor using back electromotive force(B-EMF) without encoder is investigated. The stepping motor generally uses the rotary encoder to detect the rotor position. Since this method increases the cost and the motor configuration size, the new closed-loop control method applied for the B-EMF was implemented by using current detect circuit, AD-converter, and micro controller unit(MCU). The control loop of stepping motor became very simplified. The current change of stepping motor measured by the amplifier was measured and analyzed, when the missing step is occurred. Based on the data from current feedback, position errors were compensated and confirmed by using AD-converter.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.335-342
• /
• 2000

멀티미디어 정보를 처리하기 위해서 필수적으로 필요한 기술이 멀티미디어 동기화를 구성하는 것이다. 본 논문에서는 두 시스템 사이의 클럭 동기를 맞추어 주기 위하여 가상 클럭(VGC : Virtual Global Clock)을 제안하였다. Loop flack 방법에 의한 제안된 가상 클럭은 통신이 가능한 모든 환경에 적용할 수 있다

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.604-614
• /
• 2012

This paper presents a comparative study of position sensorless control schemes based on back-electromotive force (back-EMF) estimation in permanent magnet synchronous motors (PMSM). The characteristics of the estimated back-EMF signals are analyzed using various mathematical models of a PMSM. The transfer functions of the estimators, based on the extended EMF model in the rotor reference frame, are derived to show their similarity. They are then used for the analysis of the effects of both the motor parameter variations and the voltage errors due to inverter nonlinearity on the accuracy of the back-EMF estimation. The differences between a phase-locked-loop (PLL) type estimator and a Luenberger observer type estimator, generally used for extracting rotor speed and position information from estimated back-EMF signals, are also examined. An experimental study with a 250-W interior-permanent-magnet machine has been performed to validate the analyses.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.62-65
• /
• 2002

A dieless forming system which consists of hydraulic punch elements and elastomer/fluid pads, was developed for sheet metal forming. 2-D curved surface forming was carried out using open-loop, closed-loop, and repeated forming method. Closed-loop exhibited higher decision than open-loop forming. Repeated forming also showed reduced spring back and possibility of high precision.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.916-927
• /
• 2001

본 논문에서는 인터넷 환경에서 멀티미디어의 동기를 맞추어 주기 위하여 가상 클럭(VGC : Virtual Global Clock)을 구성하였고, 가상 클락 기반의 SRTS를 제안하여 미디어 내부 동기(sntra_synchronization)를 이루었다. 8bit/8kHz PCM-sampling 음성 신호에서 320byte를 한 프레임으로 했을 때 각 프레임에 순서 번호를 넣어서 미디어간의 동기(inter_synchronization)를 유지한다. Loop Back 방법을 이용하여 구성한 가상 클럭(VGC)은 통신이 가능한 모든 환경에 적용할 수 있다.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.162-170
• /
• 2009

This paper deals with a closed-loop remanufacturing system with one manufacturer and one remanufacturer. The manufacturer sells new products bearing the 'Extended Producer Responsibility (EPR).' It is assumed that the manufacturer's collection rate of used products depends only on the buy-back cost, while that of the remanufacturer depends on the minimum allowed quality level of used products in addition to the buy-back cost. Through the development of mathematical models with the objective function of maximizing profit, we study an efficient operation policy of each party. The decision variables are the unit selling price of new products and remanufactured products, the unit buy-back cost of the used products of the manufacturer and remanufacturer, and the minimum allowed quality level. The validity of the model is examined through numerical examples and sensitivity analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.794-803
• /
• 2016

This paper propose a sensorless control system of IPMSM with a adaptive back-EMF estimator and improved instantaneous reactive power compensator. A saliency-based back-EMF is estimated by using the adaptive algorithm. The estimated back-EMF is inputted to the phase locked loop(PLL) and the improved instantaneous reactive power(IRP) compensator for estimating the position/speed of the rotor and compensating the error components between the estimated and the actual position, respectively. The stability of the proposed system is achieved through Popov's hyper stability criteria. The validity of proposed algorithm is verified by the simulations and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.6
• /
• pp.543-546
• /
• 2017

This paper presents a simple approach for improving the performance of back-electromotive force (back-EMF)-estimation-based sensorless drives for surface-mounted permanent magnet synchronous motors (SPMSM). Similar to conventional approaches, a hypothetical d-q synchronous reference frame model of SPMSM is employed in the proposed approach to estimate the back-EMFs. This approach also employs a dual phase locked loop structure to compensate for the effect of the dead time and parameter uncertainty of the inverter on the estimated back-EMFs. The proposed algorithm is validated by conducting experiments.