• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.291-296
• /
• 2002

In order to apply precast decks to the continuous composite bridges, several experiments and analytical studies were performed. For the continuous composite bridges, special attention should be paid to the transverse joints in negative moment region. Judging from the results, combination of longitudinal internal prestressing tendon and the external tendon can be effectively used for the prevention of cracking in the negative moment region of precast decks.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.119-126
• /
• 1999

The objective of this task is to develop seismic design and capacity detailing recommendations for all portions of bridge piers that do not participate as primary energy dissipation elements. particular emphasis is given to the design requirements of cap beams and their connections of multi-column bridge pier bents. By prestressing the joints it is possible to ensure the joints remain elastic. Prestress enhances the bond and anchorage of the longitudinal column bars and also minimizes or avoids diagonal shear cracking in the joints.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.43-59
• /
• 2014

Many bridges are subject to lateral damage for their girders due to impact by over-height vehicles collision. In this study, the optimum configurations of carbon fiber reinforced polymers (CFRP) laminates were investigated to repair the laterally damaged prestressed concrete (PS) bridge girders. Experimental and analytical investigations were conducted to study the flexural behavior of 13 half-scale AASHTO type II PS girders under both static and fatigue loading. Lateral impact damage due to vehicle collision was simulated by sawing through the concrete of the bottom flange and slicing through one of the prestressing strands. The damaged concrete was repaired and CFRP systems (longitudinal soffit laminates and evenly spaced transverse U-wraps) were applied to restore the original flexural capacity and mitigate debonding of soffit CFRP longitudinal laminates. In addition to the static load tests for ten girders, three more girders were tested under fatigue loading cycles to investigate the behavior under simulated traffic conditions. Measurements of the applied load, the deflection at five different locations, strains along the cross-section height at mid-span, and multiple strains longitudinally along the bottom soffit were recorded. The study investigated and recommended the proper CFRP repair design in terms of the CFRP longitudinal layers and U-wrapping spacing to obtain flexural capacity improvement and desired failure modes for the repaired girders. Test results showed that with proper detailing, CFRP systems can be designed to restore the lost flexural capacity, sustain the fatigue load cycles, and maintain the desired failure mode.

• Computers and Concrete
• /
• 제11권5호
• /
• pp.383-397
• /
• 2013

Two-dimensional tensile stresses are occurring at the back of the anchorage of the tendons of prestressed concrete bridges. A new method named "tensile stress region" for the design of the reinforcement is presented in this paper. The basic idea of this approach is the division of an anchor block into several slices, which are described by the tensile stress region. The orthogonal reinforcing wire mesh can be designed in each slice to resist the tensile stresses. Additionally the sum of the depth of every slice defined by the tensile stress region is used to control the required length of the longitudinal reinforcement bars. An example for the reinforcement design of an anchorage block of an external prestressed concrete bridge is analyzed by means of the new presented method and a finite element model is established to compare the results. Furthermore the influence of the transverse and vertical prestressing on the ordinary reinforcement design is taken into account. The results show that the amount of reinforcement bars at the anchorage block is influenced by the layout of the transverse and the vertical prestressing tendons. Using the "tensile stress region" method, the ordinary reinforcement bars can be designed more precisely compared to the design codes, and arranged according to the stress state in every slice.

• 한국방재학회 논문집
• /
• 제2권3호
• /
• pp.101-108
• /
• 2002

다양한 공법으로 널리 시공되고 있는 프리스트레스트 콘크리트(PSC) 연속 교량의 단면에는 시공이 음이 발생하게 된다. 이러한 시공이음부에서 연속적인 프리스트레스 하중을 도입하기 위해서는 텐던을 겹침이음(overlapping)하거나 텐던 커플러를 사용하는 방법이 사용되며, 후자의 경우는 시공이 음의 정착부 배근의 단순화와 효율적으로 텐던을 사용할 수 있는 장점이 있다. 본 연구의 목적은 텐던 커플러를 사용한 PSC 교량의 시공이음부의 종방향 응력 분포를 규명하는 데 있으며, 이를 위해 텐던 연속과 단면의 분할 시공 효과를 고려한 실험과 유한요소 해석을 수행하였다 연구결과 텐던 커플러를 사용한 시공이음부의 응력 상태는 텐던 커플러를 사용하지 않은 경우에 비해 종방향 응력상태와 다르게 나타나고 있다. 특히 구조적으로 문제가 되는 종방향 압축응력은 시공이음부에서 텐던 연결비율이 증가함에 따라 크게 감소한다.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.633-642
• /
• 2006

연속 강합성 교량에 종방향 프리스트레스를 도입해야 하는 프리캐스트 바닥판을 적용하기 위해서는 균열제어를 위한 사용성 설계가 이루어져야 한다. 특히, 2거더 교량의 경우에는 장지간 바닥판의 설계에서 요구되는 주철근 및 횡방향 프리스트레스와 합성설계를 위해 요구되는 전단포켓의 존재로 인해서 상세가 복잡해지게 된다. 이 논문에서는 2거더 연속강합성 교량의 프리캐스트 바닥판 채용을 위해서 필요한 유효 프리스트레스 크기의 산정과 상세의 단순화를 이루기 위해서 부착강도를 인정할 수 있는 채움재료의 선정 및 그 기준을 제시하였다. 또한, 장기거동에 대한 평가 방안을 제시하고 그 결과로부터 초기 프리스트레스의 크기 결정을 수행하여 기존의 설계의 개선 정도를 평가하였다. 일정 수준이상의 부착강도를 갖는 채움재료를 부모멘트가 크게 발생하는 영역에 사용하면 연속 강합성 교량의 전구간에 걸쳐서 일정한 종방향 프리스트레스 도입이 가능하고 이로 인해 상세의 단순화 및 경제성을 높일 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1659-1663
• /
• 2011

Precast concrete slab track is a track structure to be installed by transporting and assembling precast concrete slabs manufactured at the factory. This method can improve concrete quality, provide easy maintenance and reduce construction time, compared with in-situ concrete track. However, the concrete slabs being continuously connected in longitudinal direction, due to the temperature change between summer and winter, the openings at slab joints have occurred. Thus, in this study, to identify the cause of this opening of slab joint, the joint opening caused by temperature drop in the longitudinally continuous precast concrete slab track has been predicted using three-dimensional finite element analysis, and compared with field measurements. Based on the proven model, the slab joint opening, and the stress pattern of concrete slab and steel reinforcement according to concrete slab-base friction properties, concrete-reinforcement bond properties, and prestressing were analyzed.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.71-81
• /
• 1994

시공단계를 고려한 곡선변단면 프리스트레스트 콘크리트 박스거더교량의 해석을 수행하였다. 곡선변단면 박스요소를 사용하며 시공순서에 따른 구조계의 변화, 크리이프, 건조수축과 릴렉세이션 등의 효과를 고려하였다. 사용되는 단면형상은 양쪽에 캔틸레버를 갖는 직사각형 1실 박스단변이며 부재축은 평면상의 곡선으로 단면제원은 부재축을 따라 변할 수 있다. 각 요소는 3절점으로 구성되며 각 절점은 단면 찌그러짐과 ?을 포함하는 8자유도를 가진다. 본 연구에서 여러가지 경우의 예를 해석, 비교하였으며 실제교량에의 적용 가능성을 입증하였다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.8-14
• /
• 2002

This is the first of two part series on experimental studies of grout type transverse joints. In this study, grout type transverse joints between precast concrete slabs are statically tested to determine the cracking loads and ultimate shear capacities of the grout type transverse joints. The tests are performed with a loading equipment designed and constructed especially in the lab to induce shear failures on the joints of the test specimens. Shape of the transverse joints, grouting materials and amount of prestress are selected as test parameters for the study. The results indicate that epoxy is an excellent grouting material which can be used in limited locations where large tensile stress is acting on the slab. Longitudinal prestressing is also an effective method to increase the shear strength of the transverse joints. A rational method to estimate the cracking and ultimate loads for the design of grout type transverse joints is proposed based on the static loading tests. Success of the tests with shear loading equipment allowed continuing the research further onto the fatigue strength of the grout type joints, which will be presented in the second part of the paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.363-366
• /
• 2003

This study is to develop a strengthening method for RC slab bridges and rigid-frame bridges with external prestressing. In this study, we design the slab specimen that have a strengthening of the DB-13 and set up the longitudinal tendons placed on both side of slab strengthens the whole bridge, and lateral tendons placed under the slab strengthens the middle of slab, and conveys the load at middle slab to both sides. Structural analysis for the tensile force for strengthening were analysed and we know that displacement and strain was improved from this test. This method has no upward roof work, so it is very convenient for installing. And no spaces under the slab are need, so it is good for shallow slabs which has less space inder the slab.