• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.276-285
• /
• 2020

In this study, accelerated chloride diffusion tests were performed on OPC(Ordinary Portland Cement) and FA(Fly Ash) concrete considering three levels o f W/B(Water to Binder) ratio o n 1,095 curing days. The accelerated chloride diffusion coefficient and the passed charge were evaluated in accordance with Tang's method and ASTM C 1202, and the resistance performance to chloride attack improved over time. FA concrete showed excellent resistance performance against chloride penetration with help of pozzolanic reaction. As the result of the passed charge, FA concrete showed durability improvement, "low" grade to "very low" grade, but OPC concrete changed "moderate" grade to "low" grade at 1,095 curing days. After assuming the design variables used for durability design as normal distribution functions, the service life of each case was evaluated by the probabilistic analysis method based on MCS(Monte Carlo Simulation). In FA concrete, the increase of probability of durability failure was lower than that of OPC concrete with increasing time, because the time-dependent coefficient of FA concrete was up to 3.2 times higher than OPC concrete. In addition, the service life by probabilistic analysis was evaluated lower than the service life by deterministic analysis, since the target probability of durability failure was set to 10%. It is considered that more economical durability design will be possible if the mo re suitable target probability of durability failure is set for various structures through researches on actual conditions and indoor tests under various circumstances.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.155-187
• /
• 1992

The Korean economy has sustained high growth rate for almost three decades, that have been associated with the rapid expansion of manufacturing industries. In the beginning stage of development, the high growth of the Korean economy has been based on improvements in productivity obtained by the economies of scale. In that period, the improvements in productivity could be secured by the economies of scale in the export-oriented industries which are the labor- and material-intensive industries. In the latter half of the 1980s, the Korean economy went through rapid transition. Now Korea is at another juncture in its development process, where economic restructuring is critical to sustain high growth. However, economic restructuring in the 1990s call for much more concerted effort than before, since changes in internal and external conditions have profoundly altered the environment for economic development. If Korea is to sustain high growth in the 1990s, it has to promote balanced economic and social development in coordination with the smooth facilitation of industrial restructuring. There are no inherent conflicts among the issues involved, so they can be resolved by restructuring the economy to facilitate, in a global context, the development of knowledge- and technology-intensive activities and to ensure that the benefts of growth are reflected of qualitative improvements in national living standards. In this paper, we examined a scenario of structural changes using a mid- and long-term multisector model, in order to understand the conditions needed for realizing the growth potential. This examination explains the important features of the development course and policy directions that will help sustain high growth in the 1990s.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.467-478
• /
• 2006

Water supply reliability for a dam is defined with a concept of probabilistic reliability. An evaluation procedure of the water supply reliability is shown with an analysis of long term firm yield reliability. The water supply reliabilities of Soyanggang Dam and Chungju Dam were evaluated. To evaluate the water supply reliability, forty one sets of monthly runoff series were generated by SAMS-2000. HEC-5 model was applied to the reservoir simulation to compute the firm yield from a monthly data of time series. The water supply reliability of the firm yield from the design runoff data of Soyanggang Dam is evaluated by 80.5 % for a planning period of 50 years. The water supply reliability of the firm yield from the historic runoff after the dam construction is evaluated by 53.7 %. The firm yield from the design runoff is 1.491 billion $m^3$/yr and the firm yield from the historic runoff is 1.585 billion $m^3$/yr. If the target draft Is 1.585 billion $m^3$/yr, additional water of 0.094 billion $m^3$ could be supplied every year with its risk. From the similar procedures, the firm yield from the design runoff of Chungju Dam is evaluated 3.377 billion $m^3$/yr and the firm yield from the historic runoff is 2.960 billion $m^3$/yr. If the target draft is 3.377 billion $m^3$/yr, water supply insufficiency occurs for all the sets of time series generated. It may result from overestimation of the spring runoff used for design. The procedure shown can be a more objective method to evaluate water supply reliability of a dam.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.40-40
• /
• 2010

Studies on attractive color changing property of dye chromophore and fluorophore have been greatly enjoyed in the related industrial and research fields such as optoelectronics, chemosensor, biosensor and so on. The optical property based on D-$\Pi$-A intramolecular charge transfer (ICT) system of chromophore molecules can be utilized as suitable sensing probes for checking media polarity and determining colorimetric chemosensing effect, especially heavy metal detection. These finding are obtained by absorption and emission properties. In this work, donor-acceptor D-$\Pi$-A type fluorescent dyes were designed and synthesized with the corresponding donor and acceptor groups. The selected donor moieties might be provided prominent amorphous properties which are very useful in designing and synthesizing functional polymers and in fabricating devices. Another reasons to choose are commercial availabilities in high purity and low price. Donor-bridge-acceptor (D-A) type dyes can produce impressive optical-physical properties, yielding them potentially suitable for applications in the synthesis of small functional organic molecules. Small organic functional molecules have unique advantages, such as better solubility, amorphous character, and represent an area of research which needs to be explored and developed. Currently, their applications in metalorganic compounds is rapidly expanding and becoming widespread in self-assembly processes, photoluminescence applications, chiral organocatalysts, and ingrafts with nanomaterials. Colloidal nanoparticles have received great attentions in recent years. The photophysical properties of nanoparticles, particularly in terms of brightness, photostability, emission color purity and broad adsorption range, are very attractive functions in many applications. To our knowledge background, colloidal nanoparticles have been enjoyed their applications in bio-probe research fields. This research interest can be raised by the advantages of the materials such as high photoluminescence quantum yields, sharp emission band, long-term photostability and broad excitation spectra. In recent, the uses of nanoparticles being embedded in a polymer matrix and binded on polymer surface have been explored and their properties such as photo-activation and strong photoluminescence have been proposed. The prepared chromophores and nanoparticles were investigated with absorption and emission properties, solvatochromic behaviors, pH induced color switching effects, chemosensing effects and HOMO/LUMO energy potentials with computer simulation. In addition, synthesized fluorophore dyes and particles were applied onto PE/Aramid fiber fluorescing colorations. And the related details were then discussed.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.39-62
• /
• 2020

In this study, Barcelona Basic Model (BBM) was implemented into TOUGH2-MP/FLAC3D for the numerical analysis of coupled thermo-hydro-mechanical (THM) behavior of unsaturated soils and the prediction of long-term behaviors. Similar to the methodology described in a previous study for the implementation of BBM into TOUGH-FLAC, the User Defined Model (UDM) of FLAC based on the Modified Cam Clay Model (MCCM) and the FISH function of FLAC3D were used to extend the existing MCCM module in FLAC3D for the implementation of BBM into TOUGH2-MP/FLAC3D. In the developed BBM module in TOUGH2-MP/FLAC3D, the plastic strains due to change in suction increase (SI) in addition to mean effective stress are calculated. In addition to loading-collapse (LC) yield surface, suction increase (SI) yield surface is changed by hardening rules in the developed BBM module. Several numerical simulations were conducted to verify and validate the implementation of BBM: using an example presented in the FLAC3D manual for the standard MCCM, simulation results using COMSOL, and experimental data presented in SKB Reports. In addition, the developed BBM analysis module was validated by simultaneously performing a series of modeling tests that were performed for the validation of the Quick tools developed for the purpose of effectively deriving BBM parameters, and by comparing the Quick tools and Code_Bright results reported in a previous study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.881-881
• /
• 2012

낙동강유역에는 4대강 사업으로 8개의 보가 낙동강 본류에 새롭게 설치되었으며, 따라서 상류로부터 유입되는 유사가 보상류에 퇴적되어 하천제방이나 하천구조물의 안전을 위협할 수 있다. 또한 홍수시에는 농경지의 매몰과 저수지의 퇴적현상이 발생하는 등 유역유사에 의한 다양한 문제가 발생할 수 있으며, 강우로부터 유출되는 유사는 강우사상에 따라 빠르게 변할 수 있으나 수체에 즉각적인 영향을 유발하지 않을 경우 만성적인 특성으로 인해 침전물을 계속 이동시키며 축적되는 문제가 발생한다. 따라서 이러한 문제를 사전에 예측하고 낙동강유역에 대한 유역유사관리 대책마련을 마련하기 위해 유역유출과 유사의 이송 및 퇴적양상을 분석하여 유역관리를 위한 자료를 구축할 필요가 있다. 이러한 기초자료 분석을 위해 활용되는 유역모형 중 SWAT(Soil and Water Assessment Tool) 모형은 장기간 유역 유출로 인한 유사 모의를 수행하는데 가장 많이 활용되는 모형이며, 미국 농무성 농업연구소(USDA Agricultural Research Service, ARS)의 Jeff Amold 등에 의해 개발된 모형이다. SWAT 모형은 장기유출 및 유사 발생에 대한 시 공간적 변화를 모의하는 모형으로 넓은 범위의 유역에 대해 일단위 모의 간격으로 최대 100년까지 모의가 가능한 장기유역 모의에 최적화된 모형이다. 본 논문에서는 SWAT 모형을 이용하여 낙동강유역의 장기 유역 유출 및 유사 모의를 수행하기위해 2004년에서 2009년까지의 유출량 자료와 유량-유사량관계곡선 등을 이용하여 본류 및 지류 유출구 주요지점에 대해 검보정을 수행하고자 한다. 모의의 정확도 향상을 위해 안동댐, 임하댐, 영천댐, 합천댐, 남강댐, 밀양댐 및 낙동강 본류 등 총 7개 유역으로 구분하여 SWAT 모형을 구축하였으며, 각 유역별로 유출량과 유사량에 대하여 각각 보정 및 검증을 수행하였다. 낙동강 본류유역 총 7개의 댐 방류량자료와 20개의 대형하수종말처리장 방류량자료를 이용한 낙동강유역의 유출량 보정 및 검증 결과, 모의치가 실측치를 잘 반영하고 있는 것으로 나타났다. 또한 총 11개 지점의 수위관측소에 대해 유사량 측정 성과를 이용한 유사량 보정 및 검증 결과, 강우시 유사량 모의값은 유출량-유사량관계곡선 식을 잘 반영하였으나, 비강우시에는 모의값이 관계곡선 식의 결과값보다 대체적으로 높게 나타났다.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.394-405
• /
• 2011

In this paper, we applied coupled non-isothermal, multiphase fluid flow and geomechanical numerical modeling using TOUGH-FLAC coupled analysis to study the complex thermodynamic and geomechanical performance of underground lined rock caverns (LRC) for compressed air energy storage (CAES). Mechanical stress in concrete linings as well as pressure and temperature within a storage cavern were examined during initial and long-term operation of the storage cavern for CAES. Our geomechanical analysis showed that effective stresses could decrease due to air penetration pressure, and tangential tensile stress could develop in the linings as a result of the air pressure exerted on the inner surface of the lining, which would result in tensile fracturing. According to the simulation in which the tensile tangential stresses resulted in radial cracks, increment of linings' permeability and air leakage though the linings, tensile fracturing occurred at the top and at the side wall of the cavern, and the permeability could increase to $5.0{\times}10^{-13}m^2$ from initially prescribed $10{\times}10^{-20}m^2$. However, this air leakage was minor (about 0.02% of the daily air injection rate) and did not significantly impact the overall storage pressure that was kept constant thanks to sufficiently air tight surrounding rocks, which supports the validity of the concrete-lined underground caverns for CAES.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.259-264
• /
• 2013

Total body irradiation in the treatment of childhood leukemia, which is one of the pre-treatment with stem cell transplantation is being used, the current organization using compensators are treated. However, under the terms of the compensator organization long-term impact on the human body, it is difficult to assess directly. In this study, we use the mathematical simulation of radiation exposures body energy and the distance to the crew and the patient (source surface distance, SSD), and patients with tissue compensators change of the distance along the body of the organ doses were evaluated. As a result, the surface dose of energy 4 MV, SSD 280 cm, tissue compensators and the patient when the distance 30 cm 5.84 G / min showed the highest levels. In addition, patients with tissue compensators and the distance apart when 30 cm TBI represents the ideal dose distribution was found.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.35-48
• /
• 2010

For the next generation mobile communication system, diverse wireless network techniques such as beyond 3G LTE, WiMAX/WiBro, and next generation WLAN etc. are proceeding to the form integrated into the All-IP core network. According to this development, Beyond 3G integrated into heterogeneous wireless access technologies must support the vertical handover and network to be used of several radio networks. However, unified management of each network is demanded since it is individually serviced. Therefore, in order to solve this problem this study is introducing the theory of Common Radio Resource Management (CRRM) based on Generic Link Layer (GLL). This study designs the structure and functions to support the vertical handover and propose the vertical handover algorithm of which policy-based and MCDM are composed between LTE and WLAN systems using GLL and CRRM. Finally, simulation results are presented to show the improved performance over the data throughput, handover success rate and the system service cost.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.441-448
• /
• 2008

Increasing urban sprawl and climate changes have been causing unexpected high-intensity rainfall events. Thus there are needs to enhance conventional disaster management system for comprehensive actions to secure safety. Therefore long-term and comprehensive flood management plans need to be well established. Recently torrential snowfall are occurring frequently, causing have snow traffic jams on the road. To secure safety and on-time operation of the Bi-modal tram system, well-structured disaster management system capable of analyzing the show pack melt/freezing due to unexpected snowfall are needed. To secure safety of the Bi-modal tram system due to torrential snow-fall, the snow melt simulation capability was investigated. The snow accumulation and snow melt were measured to validate the SWMM snow melt component. It showed that there was a good agreement between measured snow melt data and the simulated ones. Therefore, the Bi-modal tram disaster management system will be able to predict snow melt reasonably well to secure safety of the Bi-modal tram system during the winter. The Bi-modal tram disaster management system can be used to identify top priority area for know removal within the tram route in case of torrential snowfall to secure on-time operation of the tram. Also it can be used for detour route in the tram networks based on the disaster management system prediction.