• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.125-129
• /
• 2004

Hydrating concrete pavement is typically subjected to temperature-induced stresses that drive cracking mechanisms at early concrete ages. Undesired cracking plays a key role in the long-term performance of concrete pavement systems. The loss of support beneath the concrete pavement due to curling caused by temperature changes in the pavement may induce several significant distresses such as punch out pumping, and erosion. The effect of temperature on these distress mechanisms is both significant and intricate. Because thermal conductivity dominates temperature flow in hydrating concrete over time, this material property is back-calculated by transforming governing equation of heat transfer and test data measured in laboratory. Theoretically, the back- calculated thermal conductivity simulates the heat movements in concrete very accurately. Therefore, the back- calculated thermal conductivity can be used to calibrate concrete temperature predicted by models.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.57-65
• /
• 2012

PURPOSES: It is important to consider the long-term performance of concrete pavement, because concrete pavement is more exposed to the various environmental conditions than any other concrete structures. One of the several methods to evaluate the long-term performance of concrete during winter is KS F 2456. Relative dynamic modulus of elasticity shows the resistance to freezing and thawing. METHODS: To measure relative dynamic modulus of elasticity, ultra sonic is generally used. But in this study, to measure the relative dynamic modulus of elasticity, both ultra sonic and shear wave were used and then compared each other. RESULTS: The results from the measurement by ultrasonic wave and shear wave were divided into three types. Type 1 : Specimens are good and relative dynamic modulus of elasticity did not decrease until 300 cycle. Type 2 : The relative dynamic modulus of elasticity decreased from the late cycle.(about 150 cycle later) Type 3 : The relative dynamic modulus of elasticity consistently decreased from the beginning. As a result of ANOVA, there is no difference according to measuring method, in type 2 and 3. But there is a difference according to measuring method, in type 1's relative dynamic modulus of elasticity. CONCLUSIONS: It is proved that shear wave can be used to understand the damage tendency of relative freezing and thawing and to measure the relative dynamic modulus of elasticity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.113-126
• /
• 2017

PURPOSES : This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience. METHODS : Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis. RESULTS : The economic efficiency of concrete pavement ($15{\times}15$) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete ($15{\times}15$) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future. CONCLUSIONS : This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.

• 대한토목학회논문집
• /
• 제32권4D호
• /
• pp.345-356
• /
• 2012

도로포장은 충족되어야 하는 서비스 수준을 유지하기 위해 반복적인 유지보수를 필요로 한다. 그러나 노후화된 하부구조와 반복적인 유지보수는 포장의 파손속도를 가속화시키기도 하며, 이는 한정된 예산의 효율성을 저해하는 요소가 될 수 있다. 따라서 본래의 기능을 유지하기 위해 도로의 재포장이 주기적으로 요구된다. 특히, 국도는 그 건설수요가 한계점에 다다랐으며, 노후로 인해 재포장 및 유지관리의 필요가 점점 증가하고 있는 시점이다. 그러나 도로관리자들은 예산의 한계로 이러한 노후포장에 대해 재포장 및 효율적인 유지관리를 시행하기에 많은 어려움을 겪고 있다. 이는 의사결정에 필요한 장기적인 유지보수 전략의 부재 때문이라 할 수 있다. 이에 본 논문은 반복적인 유지보수로 인한 포장의 상태변화를 고려한 유지보수 전략을 도출하여 관리자들의 의사결정에 도움을 주고자 하였다. 분석을 위해 포장관리시스템(PMS)이 도입된 1986년부터 장기간 누적된 국도의 유지보수 이력데이터를 활용하였으며, 방법론으로는 유지보수 횟수에 따른 수명분포 도출 및 위험률(hazard) 함수의 변화과정을 분석한 후, 이 결과를 근거로 다양한 유지보수 대안들에 대해 중장기 유지보수비용을 산정하였다. 이를 위해 포장파손과정의 불확실성을 고려하고, 도로관리자들에게 보다 실용적인 정보를 제공하기 위해 확률론적 방법(몬테카를로기법)을 추가로 도입하였다. 또한, 신뢰성 이론을 활용하여 유지보수에 대한 품질보증과 관련된 정보도 도출하고자 하였다. 이러한 정보는 장기유지보수전략 수립에 중요한 정보로 활용할 수 있다.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.9-18
• /
• 2016

PURPOSES : This study aimed to evaluate the performance of pavement management works and to develop a function for estimating the level of service (LOS) and cost of service (COS) for the systematic and quantitative management of pavement performance in the public sector. METHODS : The International Roughness Index (IRI) was used as the performance index for pavement management. Long-term pavement performance data for a period of 7 years (2007-2014) collected by the National Highway Pavement Management System and historical maintenance budget data published by the South Korean government were used to develop the LOS-COS function. Based on the function, a model for estimating the appropriate budget as well as the network conditions was suggested. RESULTS : There was high degree of correlation between pavement performance and the investment level (R = - 0.74). The developed LOS-COS function suggested that the unit cost to improve the network IRI to 1 m/km was 32.6 billion KRW. Further, the maintenance costs normalized with respect to the LOS levels were LOS-A = 88.2 billion KRW, LOS-B = 55.6 billion KRW, and LOS-C = 23.0 billion KRW. CONCLUSIONS : This study proposes a simple way of developing a LOS-COS function. It also shows how to develop a network budget demand and condition estimation model using the LOS-COS function. In addition, it is the first attempt to evaluate the road maintenance budget in South Korea. It is expected that these results will help in the negotiations between the road managers and budget makers.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.532-541
• /
• 2016

서울시 도로는 교통하중, 도로포장 노후화 및 잦은 굴착복구 등의 열악한 도로조건으로 인하여 도로포장 수명이 기대수명에 미치지 못하여 효율적 도로포장관리(Pavement Management System, PMS)와 적절한 유지보수 시기가 요구된다. 본 연구에서는 도로의 표면상태조사와 FWD(Falling Weight Deflectometer)기반 조사를 통하여 장기 공용성 구간의 보수우선 순위를 선정하고 각 지수에 따른 우선순위의 상관도를 분석하여 명확한 포장상태 평가와 타당한 공법 및 시기의 선정에 도움이 되고자 한다. 이를 위해 서울특별시의 장기 공용성 구간(Long Term Performance Pavement, LTPP)을 활용하여 표면상태조사를 통해 균열, 소성변형, 종단평단성을 측정하였고 서울포장평가지수인 SPI(Seoul Pavement Index)로 포장상태를 나타내었다. 또한 동일 구간에 대해 FWD시험을 통한 처짐량과 코어채취에 의한 포장두께 자료를 이용하여 포장층의 탄성계수를 역산하고 허용 교통량을 산정하여 실제 교통량과 허용 교통량을 비교 후 잔존수명을 추정하였다. 이를 통하여 도출된 포장상태 지수와 포장지지력에 따른 잔존수명을 비교분석하였다. 결과적으로 표면상태지수인 Crack, Rutting, IRI(International Roughness Index) 값들의 보수 우선순위와 지지력에 의한 보수 우선순위를 분석하여 보수 우선순위에 따른 포장상태지수와 포장지지력의 상관성을 검토하였다. 그 결과, 균열과 소성변형에 대하여 R-square 값이 0.65이상으로 상관도가 높은 반면, 종단평탄성과 그 값을 포함한 SPI와의 상관도는 비교적 낮은 수준을 나타내었다.

• 한국도로학회논문집
• /
• 제2권2호
• /
• pp.139-148
• /
• 2000

외국의 포장가속시험기는 대부분 아스팔트포장의 시험을 주된 목적으로 개발되었다. 그러나, 국내의 고속도로는 콘크리트포장과 아스팔트포장이 거의 같은 연장을 유지하고 있는 실정으로 콘크리트포장의 활용이 예상되어 콘크리트 포장의 시험을 위한 독자적인 포장가속시험시설의 개발이 요구되고 있다. 따라서 한국의 실정에 알맞은 콘크리트/아스팔트포장 '시험용 포장가속 시험시설'을 개발하기 위하여 1997년부터 1999년 동안의 3년간 연구를 수행하였다. 1차 연도에서는 포장가속시험시설을 제작하는데 필요한 기본적인 사양과 기본 시스템 설계에 관한 기초연구가 이루어 졌고, 2$\sim$3차 년도에는 KALES의 전체구조, 하중작용, 현가장치 및 구동장치 등에 대한 상세설계를 수행하였다. 실모델을 제작하기 전단계로 모형시험기를 만들어 시험을 수행하여 작동성 및 하중분배기구 등을 검토하였다. 피로해석 검토결과 제안된 KALES 시스템은 내구성이 있으며 실제차량을 잘 모사할 수 있는 시험기로 판명되었다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.103-112
• /
• 2017

PURPOSES : In this study, field performance evaluation of crack treatment of pavement and the feasibility of surface treatment of pavement are presented. The performance and cost of preventive maintenance methods have been previously verified, and the methods are being used in many developed countries and cities. However, the performance and cost of the system have not been verified in domestic, field applications. Therefore, in order to improve performance, the field performance is evaluated, and a reasonable cost is proposed. METHODS : Visual Inspection was conducted to evaluate the field application and performance of the preventive maintenance method. In addition, the PCI index was calculated from the results of visual inspection of the application area of the surface treatment method, and the performance life of each method was predicted. For the economic evaluation, life cycle cost analysis was performed using the life cycle cost analysis program. RESULTS :In order to evaluate and quantify the field performance of crack repair material, the residue condition of the pavement surface after crack treatment, rather than the performance of the material, is evaluated. In addition, the crack resistance and performance life of surface treatment methods are evaluated. The cost of currently available treatment methods are compared to the common pavement cut and overlay method, and it is determined that the preventive method is not economical based on life cycle cost analysis. CONCLUSIONS :Because of the characteristics of cracking, it is necessary to conduct the evaluation of currently applied methods and the analysis of the cause of damage, by visual inspection. Moreover, in order to evaluate the performance and economic suitability of the currently applied surface treatment methods, it is necessary to acquire information on application sections by monitoring their long-term conditions and performance.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.633-641
• /
• 2021

본 연구에서는 철강산업 부산물인 제강슬래그 및 폐아스팔트 콘크리트포장 파쇄물인 순환골재를 사용하여 아스팔트 혼합물용 천연골재를 대체 가능성을 파악하고 제강슬래그를 활용한 아스팔트 혼합물의 공용성 평가를 수행하였다. 일반 WC-2와 Slag WC-2(R)에 대한 평가는 동일한 조건으로 수행하였으며, 수행기관은 국가 공인시험기관(KTR) 및 한국도로학회로 각 기관의 연구용역을 통해 평가되었다. 동적안정도, 동탄성계수, 피로균열 시험결과 슬래그 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 각각 140%, 저온·고온 487·350%, Low·Middle·High Stress Level 32·325·900% 증가하는 것으로 조사되었다. 함부르크 휠 트래킹 시험결과 두 가지 혼합물의 수분저항성이 우수한 것으로 조사되었으나, 슬래그 아스팔트 혼합물 시험결과에 변곡점이 없고 변위발생량이 낮아 일반 혼합물 대비 우수한 것으로 조사되었다. 장기공용성 평가(APT) 결과 슬래그 아스팔트 혼합물에서 소성변형 발생량이 6.5% 적게 발생하였으며, 표층, 기층 및 하부층의 압축량을 분석한 결과 슬래그 포장도로의 표층 소성변형 저항성이 45% 높게 조사되었다.