• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.78-85
• /
• 2019

High variance observed in the measurement system can cause high process variation that can affect process capability badly. Therefore, measurement system analysis is closely related to process capability analysis. Generally, the evaluation for measurement system and process variance is performed separately in the industry. That is, the measurement system analysis is implemented before process monitoring, process capability and process performance analysis even though these analyses are closely related. This paper presents the effective concurrent evaluation procedure for measurement system analysis and process capability analysis using the table that contains Process Performance (Pp), Gage Repeatability & Reproducibility (%R&R) and Number of Distinct Categories (NDC). Furthermore, the long-term process capability index (Pp), which takes into account both gage variance and process variance, is used instead of the short-term process capability (Cp) considering only process variance. The long-term capability index can reflect well the relationship between the measurement system and process capability. The quality measurement and improvement guidelines by region scale are also described in detail. In conclusion, this research proposes the procedure that can execute the measurement system analysis and process capability analysis at the same time. The proposed procedure can contribute to reduction of the measurement staff's effort and to improvement of accurate evaluation.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2023

In general, electric submersible pumps (ESPs), which have an average life of 1.0 to 1.5 years, experience a decrease in performance and a reduction in life of the pump depending on oil and gas reservoir characteristics and operating conditions in wells. As the result, the failure of ESP causes high well workover costs due to retrieval and installation, and additional costs due to shut down. In this study, a flow loop system was designed and established to predict the life of ESP in long­term operation of oil and gas wells, and the life cycle data of ESP from the time of installation to the time of failure was acquired and analyzed. Among the data acquired from the system, flow rate, inlet and outlet temperature and pressure, and the data of the vibrator installed on the outside of ESP were analyzed, and then the performance status according to long-term operation was classified into five stages: normal, advice I, advice II, maintenance, and failed. Through the experiments, it was found that there was a difference in the data trend by stage during the long­term operation of the ESP, and then the condition of the ESP was diagnosed and the failure of the pump was predicted according to the operating time. The results derived from this study can be used to develop a failure prediction program and data analysis algorithm for monitoring the condition of ESPs operated in oil and gas wells.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.18-29
• /
• 2019

In the field of Human-Computer Interaction design, persuasive design has gradually been applied to the system development and design process, especially for mobile application design. However, most mobile applications have hitherto a very short using lifecycle. Especially, design features with long-term persuasive effectiveness remain to be further researched and developed. In this study, we focused on investigating and identifying the durative persuasive design characteristics through a data mining process and evaluating the durative effectiveness through a long-term observation process. Total five hundred healthcare-related mobile applications were selected from Apple iTunes Store and a mixed method was conducted to extract the most common persuasive design characteristics. Based on the results of extraction, a representative healthcare-related mobile application was selected as experimental subject. Total one hundred and twenty participants were observed during a six-months experiment and the monitoring data of app usage of all participants was collected once a week. According to the evaluation model for behavior change identification process, participants with habit formation features were proved to have a significant long-term perception level for ten persuasive design characteristics. Further interview research was performed to investigate the participant's long-term perceptions on those characteristics for the purpose of identifying the durative persuasions. The results indicated that a long-term durative effectiveness can be observed and healthcare-related apps designed with those characteristics could have durative effectiveness. This study may contribute to the improvement of future mobile application designs in user experience and durative persuasion, as well as bringing future benefits for both mobile application developers and users.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.4
• /
• pp.30-41
• /
• 2016

The amount of groundwater related data is drastically increasing domestically from various sources since 2000. To justify the more expansive continuation of the data acquisition and to derive valuable implications from the data, continued employments of sophisticated and state-of-the-arts statistical tools in the analyses and predictions are important issue. In the present study, we employed a well established machine learning technique of Gaussian Process Regression (GPR) model in the trend analyses of groundwater level for the long-term change. The major benefit of GPR model is that the model provide not only the future predictions but also the associated uncertainty. In the study, the long-term predictions of groundwater level from the stations of National Groundwater Monitoring Network located within Han River Basin were exemplified as prediction cases based on the GPR model. In addition, a few types of groundwater change patterns were delineated (i.e., increasing, decreasing, and no trend) on the basis of the statistics acquired from GPR analyses. From the study, it was found that the majority of the monitoring stations has decreasing trend while small portion shows increasing or no trend. To further analyze the causes of the trend, the corresponding precipitation data were jointly analyzed by the same method (i.e., GPR). Based on the analyses, the major cause of decreasing trend of groundwater level is attributed to reduction of precipitation rate whereas a few of the stations show weak relationship between the pattern of groundwater level changes and precipitation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.97-108
• /
• 2012

Dynamic responses were measured using long-term monitoring system for Uldolmok tidal current pilot power plant which is one of jacket-type offshore structures. Among the dynamic quantities, the tilt angle was chosen because the low frequency response components can be precisely measured by dynamic tiltmeter, and the natural frequencies and modal damping ratio were successfully identified using proposed LS-FDD (least squared frequency domain decomposition) method. And the effects of tidal height and tidal current velocity on the variation of natural frequencies and modal damping ratios were investigated in time and frequency domain. Also the non-parametric models were tested to model the relationship between tidal conditions and modal properties such as natural frequencies and damping ratios.

• Wind and Structures
• /
• v.36 no.6
• /
• pp.379-392
• /
• 2023

Structural health monitoring is used to ensure the well-being of civil structures by detecting damage and estimating deterioration. Wind flow applies external loads to high-rise buildings, with the horizontal force component of the wind causing structural displacements in high-rise buildings. This study proposes a deep learning-based predictive model for measuring lateral displacement response in high-rise buildings. The proposed long short-term memory model functions as a sequence generator to generate displacements on building floors depending on the displacement statistics collected on the top floor. The model was trained with wind-induced displacement data for the top floor of a high-rise building as input. The outcomes demonstrate that the model can forecast wind-induced displacement on the remaining floors of a building. Further, displacement was predicted for each floor of the high-rise buildings at wind flow angles of 0° and 45°. The proposed model accurately predicted a high-rise building model's story drift and lateral displacement. The outcomes of this proposed work are anticipated to serve as a guide for assessing the overall lateral displacement of high-rise buildings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.538-541
• /
• 2009

Increasing of number of people who suffered from long term chronic diseases which required frequent daily health monitoring and body check up in conjunction with the trendy uses of mobile phones and Personal Digital Assistants (PDAs) in various ubiquitous computing had make portable healthcare system a well known application today. A mobile phone based portable healthcare monitoring system with multiple vital signals monitoring ability at real time in WSN and CDMA network is developed. This system carries out real time monitoring and local data analysis process in the mobile phone. Any detection of abnormal health condition and diagnosis at earlier stage will reduce the risk of patient's life. As an extension to the existing model, a pre-diagnosis management system (PDMS) is designed to minimize the time consuming in pre-diagnosis process in the hospital or healthcare center. An alert is sent to the web server at the healthcare center when the patient detects his health is at critical state where the immediate diagnosis is needed. Preparation of diagnosis equipments and arrangement of doctor and nurses at the hospital side can be done earlier before the arrival of patient at the hospital with the help of PDMS. An efficient pre-diagnosis management increases the chances of diseases recovery rate as well.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.367-378
• /
• 2008

The study is the establishment of spaceborne monitoring plan for land management. Spaceborne monitoring is land use change detection, tracking and forecasting process. For land management spaceborne monitoring plan are First, land monitoring system and long-term planning. Secondly, the spaceborne monitoring agency dedicated to specify. Thirdly, to educate the spaceborne monitoring the area of professional manpower. Fourth, data sharing and distribution systems to be prepared. Fifth, to establish real-time airborne monitoring systems. Sixth, to improve the relevant legal and institution. Seventh, continuing research and development of related technologies, and support.

• Journal of Biomedical Engineering Research
• /
• v.35 no.6
• /
• pp.203-210
• /
• 2014

Wearable medical device has been a resurgence of interest thanks to the development of technology and propagation of smart phone in recent years. Various types of wearable devices have been introduced and available in market. Capacitive coupled electrode which measures electrocardiogram over cloth is able to be applied wearable device. In previous approaches of capacitive electrode, they need proper pressure for stable contact of the electrode to body surface. However, wearable device that gives pressure on body surface is not suitable for long-term monitoring. In this study, we proposed adhesive polyurethane-based capacitive electrode for patch-type wearable electrocardiogram (ECG) monitoring device. Self-adhesive polyurethane make the electrode and whole system be adhered to the surface of skin without any pressure. The patch-type system is consisted of analog filter, analog-to-digital converter and wireless transmission module and designed to be attached on the body as a patch. To validate the feasibility of the developed system, we measured ECG signal in stable and active state and extracted heart rate. Therefore, we observed skin response after long-term attachment for biocompatibility of the adhesive polyurethane and adhesive strength of it. The result shows the possibility of applying the developed system for ECG monitoring in real-life.