• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.23-31
• /
• 2001

Melting is one of the most effective treatments for stabilizing heavy metals and also creates high value by-products. In this study, authors evaluated the leaching characteristics of heavy metals in melting slag obtained by incinerator ashes. In order to evaluate the environmental compatibility of the recycled melting slag, the samples were analysed various leaching tests of heavy metals with raw incinerator ashes, melting slag and the construction materials recycled from melting slag. As the results : (1) The leaching concentrations of the melting slag were lower than those of the raw incinerator ashes in the experiment performed in accordance with Korea Standard Leaching Test (KSLT). (2) The heavy metal concentration of long term leaching test, which was conducted in various pH conditions, were under the standard level of regulation in KSLT. (3) The leaching concentration of mortar samples used for evaluating the feasibility of recycling the melting slag as construction materials also shows the suitable range for recycling. (4) The result of leaching test with the method of RG Min-StB 93, FGSV (Forschungsgesellschaft fur Stra$\beta$en- und Verkehrswesen) met the requirements in German.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.383-392
• /
• 2008

This study aims to evaluate the mechanical-chemical stability of used coal ash blocks, for improving fishing grounds. The surface of weathered ash blocks in seawater showed a decrease in the Ca and an increase in the Mg contents, compared to that of fresh blocks. This result reflects the substitution of Ca by Mg in seawater. The compressive strengths of ash blocks submerged into seawater during 12 months ranged from 235.23 to $447.43\;kgf/cm^2$; this is higher than the standard strength of wave-absorbing blocks($180\;kgf/cm^2)$ that are used for harbor construction. In addition, the compressive strength of ash blocks tends to increase with increasing installation time in seawater. The result of leaching experiments on coal ash blocks by Korean Standard Leaching Test(KSLT) method showed that leached concentrations of most metals except Cr(that leached up to 50 ppb, approaching standard concentration) do not exceed the seawater quality standards. A long-term(112 days) heavy metal leaching test to analyze seawater without mixing-dilution also showed that the concentrations of leached heavy metals, except for Cu, under anaerobic conditions do not exceed the seawater quality standards. Accordingly, the use of coal ash blocks in marine environments appears to be safe from chemical and mechanical factors that decrease the efficiency of concrete. Also, leaching concentration of Cu seems to be stable by decrease of leaching concentration due to dilution of seawater.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.37-43
• /
• 2010

Polymeric materials in addition to Portland cement and hydrated limes were used to solidify heavy metal contaminated tailings from five abandoned metal mines in Korea. Mine tailings were mixed separately with Portland cement and hydrated lime at a concentration of 20-30 wt% and 6-9 wt%, respectively and Ethylene Vinyl Acetate(EVA) powder was added to each specimen at a ratio of 2.5 and 5.0 wt% to binders. Polymer-added and polymer-free solidified forms were evaluated for their appropriateness in accordance with the suggested test methods. Regardless of addition of polymeric materials, all solidified forms satisfy the uniaxial compressive strength(UCS) requirements(0.35MPa) for land reclamation and show remarkably reduced leaching concentrations of heavy metals such as As, Cd, Cu, Pb and Zn less than the toxicity criteria of Korean standard leaching test(KSLT). The addition of polymeric materials increased the UCS of solidified forms to improve a long-term stability of solidified mine tailings.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.273-282
• /
• 2000

In order to investigate the extent and degree of arsenic and heavy metal contamination and the bioavailability of toxic elements around the abandoned mine in Korea, an environmental geochemical survey was undertaken in the Daduk mine. After appropriate preparation, tailings, soil, stream sediment, crop plant and fingernail samples were analysed for As, Cd, Cu, Pb and Zn by ICP-AES and ICP-MS. Elevated levels of 8,782 mg/kg As, 8.3 mg/kg Cd, 489 mg/kg Cu, 3,638 mg/kg Pb and 919 mg/kg Zn were found in tailings from the Daduk mine. These significant concentrations can impact on soils and sediments around the tailing ponds. Mean concentrations of As, Cd, Pb, Cu and Zn in soils are significantly higher than those in world average soil, especially for As and Pb. Element concentrations in sediments decrease with distance from the tailing ponds due to a dilution effect by the mixing of uncontaminated sediments. Arsenic and Cd are elevated in rice grains and stalks, and Cu and Zn concentrations in chinese cabbage, sesame and bean leaves are higher than the upper limit values for normal plant. Arsenic concentration in fingernails of farmers are higher than the normal level with a maximum value of 1.5 mg/kg. The post-ingestion bioavailability of toxic heavy metals in some paddy and farmland soils has been also investigated using the SBET (simple bioavailability extract test) method. The method utilises synthetic leaching fluids closelyanalogous to those of the human stomach. The quantities of As, Cd, Cu, Pb and Zn extracted from paddy soils after 1 hour indicated 15.9, 65.4, 46.2, 39.4 and 29.4% bioavailability, respectively and for farmland soils, 12.4, 26.0, 31.2, 29.3 and 19.4% bioavailability, respectively. The results of the SBET indicate that regular ingestion of soils by the local population could pose a potential health threat due to long-term toxic element exposure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.200-207
• /
• 2019

Cement is one of the most commonly used materials in the construction and civil engineering industry. However, emissions of carbon dioxide generated during the production of cement have been linked to climate change and environment pollutants. In order to replace cement, many studies have been actively performed research to utilizing Blast Furnace Slag(BFS), which is a byproduct of the steel industry. This study aims to investigate the physiochemical properties of the BFS powder based grout to determine whether it can be used as an environment-friendly grout material. As a fine powder, BSF can be used instead of cement grout due to its potential hydraulic property. BSF has also been known for its ability to strengthen materials long-term and to densify the internal structure of concrete. In order to investigate the physicochemical properties of the BFS powder based grout as a grout material, in this study assessment tests were performed through a gel-time measurement, uniaxial compressive strength, and chemical resistance tests, and heavy-metal leaching test. Characteristics and advantages of the slag were studied by comparing slag and cement in various methods.