Vasilescu, C.;Drob, S.I.;Calderon Moreno, J.M.;Drob, P.;Popa, M.;Vasilescu, E.
Corrosion Science and Technology
/
제17권2호
/
pp.45-53
/
2018
A new 80Ti-15Ta-5Zr wt% alloy surface was protected by anodic oxidation in phosphoric acid solution. The protective oxide layer (TiO2, ZrO2 and Ta suboxides and thickness of 15.5 nm) incorporated $PO{_4}^{3-}$ ions from the solution, according to high resolution XPS spectra. The AFM analysis determined a high roughness with SEM detected pores (20 - 50 nm). The electrochemical studies of bare and anodically oxidized Ti-15Ta-5Zr alloy in Carter-Brugirard saliva of different pH values and saliva with 0.05M NaF, pointed to a nobler surface for the protected alloy, with a thicker electrodeposited oxide layer acting as a barrier against aggressive ions. The oxidized alloy significantly decreased corrosion current densities and total quantity of ions released into the oral environment in comparison with the bare one, at higher polarisation resistance and protective capacity of the electrodeposited layer. The impedance data revealed a bi-layered oxidation film formed by: a dense, compact, barrier layer in contact with the metallic substrate, decreasing the potential gradient across the metal/oxide layer/solution interface, reducing the anodic dissolution and a more permissive, porous layer in contact with the electrolyte. The open circuit potential for protected alloy shifted to nobler values, with thickening of the oxidation film signifying long-term protection.
암석의 점탄성적 성질에 기인하는 크리프 특성에 대한 이해는 일정하중 하에서 시간에 대한 변형으로 장기적인 지반거동을 예측할 수 있는 중요한 요소이다. 포항지역에 분포하는 제3기 두호층 이암의 크리프 특성을 파악하기 위하여 암석의 기본적인 물성, 역학적 특성 및 크리프 시험을 실시하였다. 대상 이암은 illite 및 chlorite 등 점토광물을 26% 함유하고 있어 큰 크리프 변형을 보였으며, 평균 일축압축강도는 $462{\;}kg/\textrm{cm}^2$ 이었는데, 크리프 시험은 일축압축강도의 40-70% 일정 응력수준에서 수행하였다. 시험 결과 얻어진 시간-변형률 곡선으로부터 암석의 크리프 특성을 규정하는 다양한 경험식 및 이론식의 크리프 상수를 도출하였는데, 그 중 Griggs 경험식 및 Burger 모델의 이론식이 이암의 크리프 특성을 가장 잘 반영하는 것으로 평가되었다. 또, 순간탄성변형률은 응력수준에 정비례하여 증가하였으나, 1차 크리프의 변형률 속도는 응력의 크기와 무관하게 시간 경과에 따라 비슷한 양상으로 감소하였다.
터널의 배수재로 이용되는 지오텍스타일 필터는, 터널 내로 유입되는 지하수를 충분히 배수시키어 터널 라이닝에 수압이 작용되지 않도록 해야 한다. 그러나, 지오텍스타일의 막힘현상으로 인하여 필터재의 통수 능력이 우선적으로 감소하게 되고 막힘현상은 이를 더욱 심각하게 만든다. 본 연구에서는 서울시의 신내동 과 포이동에서 채취한 시료에 대하여 터널 필터재의 평면흐름을 모사하여 폐색현상을 고찰하였다. 신내동 시료는 SW-SM으로 분류되는 사질토에 가까운 시료이며, 반면에 포이동 시료는 SC로 분류되고 점성이 강한 흙이다. 필터재의 이론적인 간극분포곡선과 $O_{95}$로부터 본 실험결과를 근거로 폐색방지기준을 설정하였다. 포이동 시료에 비하여 신내동 시료가 더 뚜렷한 폐색경향을 나타냄을 알 수 있었으며, 이는 포이동 시료에 비하여 점성이 없어 잔입자가 쉽게 이탈되고 필터재에 쌓이는 원인으로 판단되었다.
PURPOSE. The purpose of this study was to analyze the retention force changes and wear behaviours of double-crown systems over long-term use. MATERIALS AND METHODS. Ten groups, each consisting of six samples, were evaluated. Specifically, casting gold alloy primary crown - casting gold alloy secondary crown (AA), laser sintering primary crown - laser sintering secondary crown (LL), casting Cr alloy primary crown - casting Cr alloy secondary crown, (CC) zirconia primary crown - electroformed secondary crown (ZA), and CAD/CAM titanium alloy primary crown - CAD/CAM titanium alloy secondary crown (TT) groups were evaluated at cone angles of $4^{\circ}$ and $6^{\circ}$. The samples were subjected to 5,000 insertion-separation cycles in artificial saliva, and the retention forces were measured every 500 cycles. The wear levels were analyzed via SEM at the beginning and end of the 5,000 cycles. RESULTS. In all samples, the retention forces increased when the conus angle decreased. The highest initial and final retention force values were found in the $LL-4^{\circ}$ group (32.89 N-32.65 N), and the lowest retention force values were found in the $ZA6^{\circ}$ group (5.41 N-6.27 N). The ZA groups' samples showed the least change in the retention force, and no wear was observed. In the other groups, wear was observed mostly in the primary crowns. CONCLUSION. More predictable, clinically relevant, and less excursive retention forces can be observed in the ZA groups. The retention force values of the LL groups were statically similar to those of the other groups, except the ZA groups.
Michelini, Ilaria;Falchi, Anna Giulia;Muggia, Chiara;Grecchi, Ilaria;Montagna, Elisabetta;De Silvestri, Annalisa;Tinelli, Carmine
Nutrition Research and Practice
/
제8권1호
/
pp.94-102
/
2014
Diet attrition and failure of long term treatment are very frequent in obese patients. This study aimed to identify pre-treatment variables determining dropout and to customise the characteristics of those most likely to abandon the program before treatment, thus making it possible to modify the therapy to increase compliance. A total of 146 outpatients were consecutively enrolled; 73 patients followed a prescriptive diet while 73 followed a novel brief group Cognitive Behavioural Treatment (CBT) in addition to prescriptive diet. The two interventions lasted for six months. Anthropometric, demographic, psychological parameters and feeding behaviour were assessed, the last two with the Italian instrument VCAO Ansisa; than, a semi-structured interview was performed on motivation to lose weight. To identify the baseline dropout risk factors among these parameters, univariate and multivariate logistic models were used. Comparison of the results in the two different treatments showed a higher attrition rate in CBT group, despite no statistically significant difference between the two treatment arms (P = 0.127). Dropout patients did not differ significantly from those who did not dropout with regards to sex, age, Body Mass Index (BMI), history of cycling, education, work and marriage. Regardless of weight loss, the most important factor that determines the dropout appears to be a high level of stress revealed by General Health Questionnaire-28 items (GHQ-28) score within VCAO test. The identification of hindering factors during the assessment is fundamental to reduce the dropout risk. For subjects at risk, it would be useful to dedicate a stress management program before beginning a dietary restriction.
한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
/
pp.44-48
/
1997
The Swedish Fire Research Board was established in 1979 to initiate and fund relevant fire research efforts. The Board is responsible for a long term research programme revised every third year, and the Board is one of two major Swedish sponsors of all fire research. Beside the Board we also have the Swedish National Rescue Services, funded by the government. BRANDFORSK gives very high priority for the industry and the insurance company and the need they express for fire research. Research that the Rescue Services Board are funding is mainly focusing the need for the fire department. The Swedish Fire Research Board, BRANDFORSK, is the joint agency of the Swedish government, the insurance industry and the business sector, for the initiation, funding and supervision of different kinds of fire research. Work is directed by a Programme Board and is performed in the form of projects at universities, research institutes, state authorities and private firms. The Secretariat of BRANDFORSK shares the premises of the Swedish Fire Protection Association, SFPA, and the SFPA is the principal and the party which enters into agreement with the State. The programme for the period 1997-1999 has been drawn up on the basis of both damage development and the trends in society which can be noted, and the evident fire problems of the interested parties and their need for fire research. The inputs in the programme have been broken down seven problem areas. In every problem area different project areas are set out, and these primarily specify the aim of the work. Our seven problem-areas are; Costs and benefits of fire protection measure. The role and behaviour of people and organizations Fire In buildings Fire in underground facilities Rescue operations fire in industries Fire and the environment. In comparison with previous fire research programmes, cost/benefit studies have been accorded higher priority, and this is also reflected in other problem areas. Grater Emphasis
In the present study, reference samples were prepared using ore preparation facility tailings taken from the copper mine (Kure, Kastamonu), Portland cement (PC) in certain proportions (3 wt%, 5 wt%, 7 wt%, 9wt% and 11 wt%), and water. Then natural zeolite taken from the Bigadic Region was mixed in certain proportions (10 wt%, 20 wt%, 30 wt% and 40 wt%) for each cement ratio, instead of the PC, to prepare zeolite-substituted CPB samples. Thus, the effect of using Zeolite instead of PC on CPB's strength was investigated. The obtained CPB samples were kept in the curing cabinet at a temperature of 25℃ and at least 80% humidity, and they were subjected to the Uniaxial Compressive Strength (UCS) test at the end of the curing periods of 3, 7, 14, 28, 56, and 90 days. Except for the 3 wt% cement ratio, zeolite substitution was observed to increase the compressive strength in all mixtures. Also, the liquefaction risk limit for paste backfill was achieved for all mixtures, and the desired strength limit value (0.7 MPa) was achieved for all mixtures with 28 days of curing time and 7 wt%, 9 wt%, 11 wt% cement ratios and 5% cement - 10% zeolite substituted mixture. Moreover, the limit value (4 MPa) required for use as roof support was obtained only for mixtures with 11% cement - 10% and 20% zeolite content. Generally, zeolite substitution seems to be more effective in early strength (up to 28th day). It has been determined that the long-term strength losses of zeolite-substituted paste backfill mixtures were caused by the reaction of sulfate and hydration products to form secondary gypsum, ettringite, and iron sulfate.
라텍스로 개질된 콘크리트는 높은 휨강도 뿐만아니라 부착강도 및 투수저항성이 좋은 재료특성을 제공한다. 이러한 이점을 활용한 초속경 라텍스개질 콘크리트(VES-LMC)에 관련된 연구결과는 재료에 관한 것이 대부분으로, VES-LMC로 덧씌우기 보강된 RC 보의 부착 경계면 거동특성에 대한 체계적인 연구는 미진하다. 따라서 본 논문에서는 VES-LMC로 보강된 철근콘크리트 보의 비선형 휨 거동에 대한 특성을 알아보고자 ABAQUS를 매개변수 연구를 수행한 결과 다음과 같은 결과를 얻을 수 있었다. 비선형 휨 해석을 위하여 본 논문에 적용된 모델의 적합성 여부를 확인한 결과 실험값과 비교적 유사한 경향을 보이는 것을 확인 할 수 있었다. 두께가 증가함에 따라 최대 저항강도가 증가하는 경향을 보여주었으며, 또한 강성 이 증가하여 내하력이 증진되는 결과를 확인할 수 있었다. 부착강도를 변수로 해석한 결과, 전단강도가 증가함에 따라 휨 저항능력이 향상되는 결과를 확인 하였으며, 두 이질재료의 부착능력이 구조물의 내하력에 지배적인 인자로 작용하는 것을 알 수 있었다.
본 논문은 도시철도공사시 하저통과구간의 지반투수저하공법에 대한 연구결과이다. 본 연구에서는 하저지반의 투수저하공법들 중 특히 주입공법에 대하여 연구의 초점을 두었다. 하저지반에서 장 단기적으로 안전하게 지반수리거동을 도모하기 위한 주입공법의 설계기법에 대하여 제시하였다. 그래서 하저통과 터널공사시 안전시공과 완공 후 터널구조물의 장기적인 안전유지관리 측면에서 적용성이 양호하다고 판단되는 N.D.S (Natural Durable Stabilizer)공법과 S.M.I (Space-Multi-Injection Grouting)공법을 제시하였다. 이 두 공법의 실질적인 시공효과를 평가하기 위하여 ${\bigcirc}{\bigcirc}$지역에 건설예정인 하저통과 도시철도터널공사구간에서 시험시공을 실시하였다. 시험 시공기간 중에는 실내 및 현장에서 지반투수 특성시험을 실시하여 시공전후의 지반의 투수성 저하효과를 평가하였으며, 두 공법의 시험시공결과는 이론적인 배경과 함께 비교 분석하였다. 비교 분석결과, S.M.I공법의 경우 N.D.S공법보다 투수성 저하효과가 큰 것으로 나타났다. 즉, 주입공법에 있어서 시멘트 무기질계 재료보다는 비 알칼리성 실리카 졸계가 투수저하 효과를 더 크게 할 수 있을 것으로 판단되었다. 끝으로 본 연구결과로부터 특히 철도터널설계시 하저지반의 투수성 저하효과 증대를 위한 주입공법 설계 기술발전에 공헌 할 것이다.
우리 사회가 성숙해지면서 사회적 자본으로서 신뢰에 대한 관심이 커지고 있으며, 사회적 자본에 대한 연구가 시민사회와 국가경제 발전에 대한 사회학적 관심에서 출발하여 기업의 역량강화에 대한 관심으로 확산되고 있다. 특히 중소벤처기업의 경우 최소인원으로 핵심기능만을 조직화한 창업이 늘어나고, 핵심기능에 집중하는 부문별 Partner의 책임경영 체제가 강조되면서 기업의 가치창조를 결정하는 변인과 과정에 대한 관심이 커지고 있다. 본 연구는 중소벤처기업의 가치창조와 장기적 생존을 위하여 필수적인 구성원의 협력과 조직의 혁신행동을 달성하기 위한 변인과 과정을 알아보기 위하여 실증적 연구를 시도하였다. 기업조직의 수준에서 Nahapiet & Ghoshal이 제안한 사회적 자본의 3가지 차원 즉, 구조적 차원, 인지적 차원, 관계적 차원의 변수로서 조직공정성, 공유가치, 조직신뢰를 선택하고 기업성과의 선행변수인 직무만족을 거쳐 기업성과의 대용변수인 혁신행동에 긍정적 영향을 미칠 것이라는 가설을 수립하여 검정하였다. 기업의 조직구성과 운영은 사회적 계약관계이므로 조직공정성과 공유가치가 직무만족에 긍정적 영향을 미치고, 직무만족이 혁신행동에 긍정적 영향을 미치며, 조직신뢰는 직무만족과 혁신행동 사이의 관계에 매개효과를 갖는 인지적 과정과 조직적 맥락을 분석하였다. 구체적으로 직무만족이 혁신행동에 미치는 직접적 효과(69%)에 비하여 조직신뢰가 혁신행동에 미치는 간접적 효과(31%)가 작지 않게 나타났으며 상대적으로 중요한 변수로 관찰되었다. 구성원 30인 이하의 중소벤처기업의 경우에는 직접효과(36%)보다 오히려 간접효과(64%)가 더 큰 것으로 나타났으며, 이는 구성원의 직무만족을 높이기 위한 노력과 함께 조직신뢰를 최우선적으로 확보하여야 한다는 점을 보여준 것이다. 본 연구의 의의는 구성원 30인 이하의 중소벤처기업의 경우 조직신뢰가 조직공정성, 공유가치, 직무만족보다 더욱 큰 영향력을 갖는 변수라는 점을 실증적으로 확인하였다는 점에 있다. 추가적으로 혁신과 생존을 위하여 조직신뢰를 포함한 사회적 자본의 제반요소를 강화하기 위한 실행방안을 논의하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.