• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.156-175
• /
• 1999

Recently the application of geophysical well logging to geotechnical site investigation is increasing, because the merit that geophysical logs provide the high resolution and in-situ physical properties in volumes of rock surrounding the borehole. Geophysical well logs are used to identify lithologic boundaries and fracture, to determine the physical properties of rock(i.e., density, velocity etc.), and to detect permeable fracture zones that could be conduits for ground water movement through the rocks. The principle of heat-pulse meter, the calibration of gamma-gamma logging, and principles and data processing of full waveform sonic logging are briefly reviewed, and the case studies of geophysical logs are discussed. Correlation between velocity by sonic logging and rock mass classification such as RMR(Rock Mass Rating) value is considered.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2001

Soundness evaluation of a structure being constructed under the sea is usually difficult. In this study, a cross-hole sonic logging(CSL) which have been used for non-destructive test of concrete piles is adopted for the integrity test and monitoring of DCM(deep cement mixing) treated soils. Chemical and physical characteristics of raw ground materials are analysed to delineate ground environmental effects on the strength of DCM treated soils. In order to convert cross-hole sonic logging data into compressive strength, correlations between compressive strengths and wave velocities of core samples have been obtained. It is found that there is little effect of ground environment on the strength of the DCM treated soils, and the density distribution of core samples and cross-hole logging data show that a defective zone may exist in the DCM treated soils. With the time lapse, however, the defective zone has been cured and consequently, compressive strength of the DCM treated soils increases and satisfies the design parameter. From this study it can be concluded that the cross-hole sonic logging can be used for the integrity test as well as monitoring the curing stage of the structures, successfully.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.254-266
• /
• 2021

Using forest resources involves solving complex and diverse tasks. At the same time, one of the key goals in the field is improving the quality of forest infrastructure. This direction requires adequate mathematical and economic justification. Moreover, creating an effective infrastructure will not only increase the accessibility and usage volumes of wood and other forest resources, but also contribute to the development of continuous and sustainable forest management. The existing practice of making decisions in terms of the organizational and technological aspects of logging, based on the personal experiences of managers or leading specialists in enterprises, hinders the achievement of constant optimal efficiency. The paper presents results that are a continuation of the research cycle of the authors' team in the fields of optimization and algorithmization of various logging processes. The focus of the study lies in the processing and movement of wood resources, the most valuable products of the investigated groups of enterprises. To this end, the paper presents a developed algorithm for determining an effective technological chain of transportation in logging operations, and for improving loading and unloading processing operations under dynamic natural and production conditions. This algorithm serves as the methodological basis for designing logging infrastructure in a dynamically changing environment.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.406-418
• /
• 1996

Tomatoes are water logged differently 0, 5, 10 and 15 cm, according to the developing stages such as germination and seedling stage under the condition of greenhouse. Along with this, they are treated according to the time condition such as 6, 12, 24, 48 and 120 hours. The results obtained are summarized as follows. 1. The result at germination stage Remarkable germination failure was observed when tomatoes were water-logged for 25 to 27 hours in the depth of 0 to 5 cm. Plant height recovered within 24 hours regardless of the water-logging depths. In the case of leaves, the recoverable time limit became shorter gradually in accordance with the increase of the water-logging depth. The decrease of the fresh weight showed acute response in the shoot rather than the root. It recovered with the 24 hours of water logging. Significant correlation was observed in all characteristics of plant height, number of leaves, fresh weight and germination rates according to the depth of water-logging. 2. The result at seedling stage Plant height recovered within the 24 hours of water-logging in the depth of 0 cm. On the deeper level, there was significant decrease regardless of time. With regard to the number of leaves, there was recovery up to 120 hours in the depth of 0 cm, up to 24 hours in the depth of 5 cm. There was, however, significant decrease when done for more than 6 hours on the deeper level. Growth of the shoot displayed the same tendency as in plant height and number of leave. The length of the longest root could be maintained by 80% in the water-logging of 0 cm compared with control. However in depth of 5 cm or more, it could not be maintained by the 120 hours water-logging. Root activity became conspicuously diminished with the logging over 0 cm. Respiration showed conspicuous decrease by the depth of 5 cm as a turning point. On the other hand, photosynthesis became decreased linearly by the depth of water-logging. Chlorophyll content displayed gradual decrease up to 48 hours, but conspicuously decreased up to 120 hours according to the varying depth of water-logging. Dieases tended to increase according to the depth and hours of water-logging. Diseases would be prevented by dint of insecticide, but there was no effect of fertilization. Weight and number of fruit per plant displayed gradual decrease as the depth and hours of water-logging became increased. Average weight of a fruit became increased. There was no statisticaly reciprocal effects between the depth and hours of water-logging. There was significant positive correlation among all the investigated characteristics, such as traits of growth and yield.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.259-267
• /
• 2010

Resistivity logging instruments were designed to measure electrical resistivity of formation, which can be directly interpreted to provide water-saturation profile. Short and long normal logging measurements are made under groundwater level. In some investigation sites, groundwater level reaches to a depth of a few meters. It has come to attention that the proximity of groundwater level might distort short and long normal logging readings, when the measurements are made near groundwater level, owing to the proximity of an insulating air. This study investigates the effects of the proximity of groundwater level (and also the proximity of earth surface) on the normal by simulating normal logging measurements near groundwater level. In the simulation, we consider all the details of real logging situation, i.e., the presence of wellbore, the tool mandrel with current and potential electrodes, and currentreturn and reference-potential electrodes. We also model the air to include the earth’'s surface in the simulation rather than the customary choice of imposing a boundary condition. To obtain apparent resistivity, we compute the voltage, i.e., potential difference between monitoring and reference electrodes. For the simulation, we use a twodimensional, goal-oriented and high-order self-adaptive hp finite element refinement strategy (h denotes the element size and p the polynomial order of approximation within each element) to obtain accurate simulation results. Numerical results indicate that distortion on the normal logging is greater when the reference potential electrode is closer to the borehole and distortions on long normal logging are larger than those on short normal logging.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.224-232
• /
• 1990

This study was conducted to find out the improvement of water-logging injury which is an important factor of yield loss in sesame. Water-logging was treated at 10, 25, 40, 55 and 70 days after emergence for 24, 48 and 72 hours in sesame variety 'Ansanggae'. Some important agronomic characters were investigated after treatment. The important agronomic characters such as plant height, leaf area, dry matter weight, capsule setting stem length, number of capsules per plant, ripenning rate and 1,000 grain weight were most susceptible at 55 days after emergence by the water-logging treatment, and the longer period of water-logging, the more susceptible. Allmost of the useful agronomic characters were able to get over injury of water-logging only within 25days after emergence, but could not get it over since 40days. Grain yield was decreased due to the water-logging treatment by 69 to 86% in 55 days after emergence that is most susceptible stage for water-logging as compared with the untreated control which is 13g per pot, and the longer period of water-logging induced the lower yield. Oil content of grain showed significant decrease only in 55 days after emergence but the composition of fatty acid did not influenced by the water-logging.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.219-226
• /
• 2012

This study provides an analysis on results of neutron logging for various borehole environments through numerical simulation based on a Monte Carlo N-Particle (MCNP) code developed and maintained by Los Alamos National Laboratory. MCNP is suitable for the simulation of neutron logging since the algorithm can simulate transport of nuclear particles in three-dimensional geometry. Rather than simulating a specific tool of a particular service company between many commercial neutron tools, we have constructed a generic thermal neutron tool characterizing commercial tools. This study makes calibration chart of the neutron logging tool for materials (e.g., limestone, sandstone and dolomite) with various porosities. Further, we provides correction charts for the generic neutron logging tool to analyze responses of the tool under various borehole conditions by considering brine-filled borehole fluid and void water, and presence of borehole fluid.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.50-57
• /
• 2006

Development of structures such as slope and tunnel, waste disposal, oil and LPG storages, and underground power house and so on, is increasing with the year. The method for appropriate estimation of rock state such as fresh or damaged rocks is also requested with increasing structural development. On these purposes, seismic logging system, which is a simple and easy way for handling as well as small and light, has been developed. Seismic logging method is one of logging tests, which is able to evaluate the state of rock mass with various shapes and is possible to obtain the relatively accuracy data at situ state. In addition, seismic logging method is at to apply to estimate structural behavior, before and after support installed. According to the results obtained from this study, firstly, it is clear that the extent of damage in rock slope due to blasting is able to be evaluated with quantity using seismic logging method, moreover to decide the damage zone in rock slope reasonably. Secondly, it is expected that installing depth of support is able to be decided more effectively and economically, using the results of seismic logging data. Finally, seismic logging method is also able to be applied safety supervision of structures, before and after support installed.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.45-49
• /
• 2005

Although the forest accounts in Korea have been constructed partly as the research projects since the mid-1990s, the framework of the accounts has not yet been established. The objective of this study is to provide the physical asset accounts of forested land and forest stock based on the system of integrated environmental economic accounts(SEEA) by utilizing the restructured 2004 statistical yearbook of forestry in Korea. In 2004 yearbook, new variables such as logging area and volumes are added. The logging area and volumes play important roles in constructing forest accounts because the basic structure of the physical asset accounts are composed of the opening stock, closing stock, and the changes between the two. The changes between the opening and closing stock are largely explained by the harvest. In forest accounts, in general, the main elements for the increase in stock are afforestation and reforestation while the main cause for the decrease is logging. In this study we separate the logging into natural or man-made causes. In addition, other useful information for the status of forest is recorded in an annex even if it is not necessary element in the account table. According to the forested land asset accounts generated with 2003 data, the logging area is larger than the reforestation area, and the total forested land is decreased. The logging volume is 0.4% of the total stock volume, and the planed logging volume is more than 3 times larger than the damaged logging volume. The damaged logging volumes by man-made causes is about $300,000m^3$, and it is much than that of natural causes, which is about $55,000m^3$.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.229-238
• /
• 2013

This study was conducted to analyze on the operational cost of logging operations in the whole-tree logging operation system by tower-yarder and swing-yarder, and in the cut-to-length logging operation system by excavator with grapple in order to spread efficient logging operation technique and to establish the logging operation system. In the results of the analysis of operation cost, in case of the whole-tree logging operation system, the operation cost was 2,099 won/$m^3$ in felling by chain saw, 28,286 won/$m^3$ in yarding by tower-yarder, 18,265 won/$m^3$ in yarding by swing-yarder, 18,939 won/$m^3$ in bucking by excavator with grapple and chain saw, 20,484 won/$m^3$ in forwarding and accumulation by wheel type mini-forwarder, 12,701 won/$m^3$ in forwarding and accumulation by excavator with grapple and small forwarding vehicle. In case of the cut-to-length logging operation system, the operation cost was 10,160 won/$m^3$ in felling and bucking by chain saw, 7,567 won/$m^3$ in cut-to-length extraction by excavator with grapple, 6,982 won/$m^3$ in branches and leaves extraction by excavator with grapple, 3,040 won/$m^3$ in the operation road construction by excavator with grapple, 20,484 won/$m^3$ in forwarding and accumulation by wheel type mini-forwarder, 12,701 won/$m^3$ in forwarding and accumulation by excavator with grapple and small forwarding vehicle.