• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.111-116
• /
• 2009

Process capability indices have been widely used in manufacturing industries to provide a quantitative measure of process performance. PCIs have been developed to represent process capability more exactly. In the previous studies, only one designated location on each part has been measured. But multiple measurement locations on each part are required to calculate the reliable process capability. In this paper, we propose a new process capability index dealing the multiple measurement locations on each part. Also we showed the relationship between the new index and sigma level according to the number of measurement locations.

• Fisheries and Aquatic Sciences
• /
• v.11 no.3
• /
• pp.140-148
• /
• 2008

We compared the quality and quantity of volatile components in salt-dried croakers prepared by different methods and obtained from different locations. In total, 110 compounds were found among regular- and delay-type salt-dried croakers purchased from two locations in Hong Kong. The major chemical classes included miscellaneous compounds(17), pyrazines(16), alcohols(15), and sulfur-containing compounds(13). Fish obtained in different locations but prepared by the same method differed only slightly in the number of identified compounds. In general, fish prepared by the delay method had a larger number of compounds compared to fish prepared by the regular method. Further, a greater number and higher levels of compounds were found in the fish obtained from one of the two locations. Overall, the delay preparation method resulted in a greater number of compounds with stronger intensity compared to the regular method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.672-672
• /
• 2011

This study describes the comparison of noise suppression performances at different locations of two error microphones in active noise control (ANC) for outdoor applications. For this study, 12 different locations were predefined to decide best locations for error sensors in terms of suppressing noise. As shown in Fig. 1, the ANC system with one primary loudspeaker, two secondary loudspeakers and two error microphones is operated by a filtered-x LMS (FXLMS) algorithm which is implemented in a TI 6713 DSP board and Realsys 4713 AD/DA Extension board. The noise for the primary source is a typical road noise measured at a highway roadside. The lengths of adaptive filters of W1 and W2 are varied from 32 to 128 respectively. An intensive computer simulation was accomplished before outdoor ANC experiments. It is expected from the simulation results that the ANC performances are very much dependent upon the locations of the two error microphones.

• Korean Journal of Acupuncture
• /
• v.21 no.2
• /
• pp.193-195
• /
• 2004

Objective : In March 2004, the second Informal Consultation Meeting on Development of International Standard of Acupuncture Point Locations was held in Beijing, China. Methods: Thirteen experts from WHO, Korea, China, and Japan attended the meeting, and they discussed the problems to establish an international standard of acupuncture point locations for education, research and quality of acupuncture treatment. Results and Conclusions : Based on the fundamental principles of respecting and reality, they recommended to determined the location of acupuncture points in the way of combining documentary analysis, clinical practices and factual measurements.

• Korean Journal Plant Pathology
• /
• v.10 no.2
• /
• pp.123-128
• /
• 1994

Incidence of blast caused by Pyricularia grisea Sacc. on 21 leading cultivars and elite lines of rice was investigated in different locations such as Icheon, Chuncheon, Jecheon, and Naju during three years from 1991 to 1993. Disease index of leaf blast of Dongjinbyeo was high in the blast nursery with range 4 to 9 at Naju, but low at other locations with range 1 to 4. Percentages of diseased leaf area of Joryungbyeo and Daelipbyeo 1 were 4.3 and 12%, respectively in the fields at Jecheon in 1993, but were much lower in the other locations during three years. The incidences of leaf blast of Daelipbyeo 1 were 0.3 and 12.0% at Chuncheon and Jecheon, respectively in 1993, but no disease occurred at Naju during three years. Percentage of diseased panicles of Joryungbyeo was 100% at Icheon and Jecheon in 1993, 92.4% in Suweon 390 at Icheon on 1991 and 100% in Jinbu 15 at Jecheon on 1993. Race distribution of rice blast fungus at Icheon and Jecheon was more varied than that of the other locations.

• Ocean Systems Engineering
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2018

The paper presents a numerical underwater channel model developed in MATLAB for estimating the optical link budget between a light emitting diode (LED) based optical transmitter and a photo diode (PD) receiver when operated in the harbor, coastal and deep waters locations in the Bay of Bengal. The water samples are collected at different locations in the Bay of Bengal using a water sampler during an offshore research cruise. The optical attenuation, the main inherent parameter determining the range of the optical communication link is identified for the different waters using an underwater irradiance measurement system in the laboratory. The identified parameters are applied to the numerical model and found that a 10 W LED and a photo diode based system can provide the optical budget required for a horizontal underwater communication range of about 0.5, 14 and 35 m in the harbor, coastal and deep waters locations respectively. By increasing the transmitter power to 50 W, the operating range of the communication link could be increased up to 53 m in deep water locations in the Bay of Bengal.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.97-104
• /
• 2017

Location prediction has been successfully utilized to provide high quality of location-based services to customers in many applications. In its usual form, the conventional type of location prediction is to predict future locations based on user's past movement history. However, as location prediction needs are expanded into much complicated cases, it becomes necessary quite frequently to make inference on the locations that target user visited in the past. Typical cases include the identification of locations that infectious disease carriers may have visited before, and crime suspects may have dropped by on a certain day at a specific time-band. Therefore, primary goal of this study is to predict locations that users visited in the past. Information used for this purpose include user's demographic information and movement histories. Data mining classifiers such as Bayesian network, neural network, support vector machine, decision tree were adopted to analyze 6868 contextual dataset and compare classifiers' performance. Results show that general Bayesian network is the most robust classifier.

• Korean Journal of Acupuncture
• /
• v.38 no.1
• /
• pp.8-15
• /
• 2021

Objectives : This study was conducted to explain the locations of GV24, BL4, GB15, GB13, and ST8 from classic literatures. Methods : 17 classics of acupuncture and moxibustion literature - 『Huangdimingtangjingjixiao』, 『Zhenjiujiayijing』, 『Huangdimingtangjiujing』, 『Beijiqianjinyaofang』, 『Qianjinyifang』, 『Waitaimiyaofang』, 『Ishimpo』, 『Taipingshenghuifang』, 『Tongrenshuxuezhenjiutujing』, 『Zhenjiuzishengjing』, 『Shisijingfahui』, 『Zhenjiujuying』, 『Yixuerumen』, 『Zhenjiudacheng』, 『Leijingtuyi』, 『Chimgukyungheombang』 and 『Yizongjinjian』 - were reviewed and compared. Results : Location of GV24 was on the midpoint of the anterior hairline before Song Dynasty, but changed to 0.5 cun directly above the midpoint of the anterior hairline after Song Dynasty. The locations of BL4, GB13 and ST8 varied among literatures. Conclusions : The locations of GV24, BL4, GB15, GB13 and ST8 were different from the standard acupoint locations, and were not consistent in 17 acupuncture and moxibustion classic literatures.

• Korean Journal of Acupuncture
• /
• v.27 no.3
• /
• pp.67-78
• /
• 2010

Objectives : The aim of the study is to draw a consensus in acupuncture point locations (APLs) which are frequently used in experimental animal studies. Well-documented APL is needed not only for human but also for rodents because stimulation of precise point is very important factor in acupuncture. Methods : We organized a committee with experts to reach a consensus on the APLs in rat. The subject points were limited to 22 points used in the papers published at international peer-review journals. To describe point locations, we adopted the syntax of sentence used in the WHO standard acupuncture point locations. Results : Locations of 22 acupuncture points such as ST36, LI4, PC6, and SP6 were described in English with photographic illustrations. Interestingly, we found that ST36 had been inserted into 2 different locations in rodent. Under consideration of practical use, the location of ST36 point was described in 2 different ways. Conclusion : We hope that newly developed APLs would be a good indicator of acupuncture experiments in rats and mice.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2016

A new algorithm for determining optimal accelerometer locations is proposed by using a frequency-domain Hankel matrix which is much simpler to construct than a time-domain Hankel matrix. The algorithm was examined through simulation studies by comparing the outcomes with those from other available methods. To compare and analyze the results from different methods, a dynamic analysis was carried out under seismic excitation and acceleration data were obtained at the selected optimal sensor locations. Vibrational amplitudes at the selected sensor locations were determined and those of all the other degrees of freedom were determined by using a spline function. MAC index of each method was calculated and compared to look at which method could determine more effective locations of accelerometers. The proposed frequency-domain Hankel matrix could determine reasonable selection of accelerometer locations compared with the others.