• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.117-124
• /
• 2003

Pre-launch calibration data have been analyzed for evaluating the point spread function (PSF) of Yohkoh Soft X-ray Telescope (SXT). Especially, it is found crucial that the effect of undersampling should be treated properly. The best fit solution of the SXT PSF, which is modeled by an elliptical Moffat function, has been derived by the comparison with the ground experiment data. In order to examine the off-axis variation of the SXT PSF, we need to define in advance the location of the optical axis on the CCD. According to the previous studies, the off-axis variation of effective area (the vignetting function) may be approximated either by two non-concentric cones or by a cone with some flat distortions. There have been, however, no fully approved representations for the SXT vignetting effect. The effect of the shift of the optical axis from the geometrical center of the telescope is investigated by numerical simulation. It is revealed from our study that the full width at half maximum (FWHM) of the SXT PSF stays nearly constant within an error bound over the central area of the CCD where the solar disk is located.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.90-95
• /
• 2004

The probabilistic fracture analysis is used to determine the effects of uncertainties involved in material properties, location and size of flaws, etc, which can not be addressed using a deterministic approach. In this paper the probabilistic fracture analysis is applied for evaluating the RV(Reactor Vessel) under PTS(Pressurised Thermal Shock). A semi-elliptical axial crack is assumed in the inside surface of RV. The selected random parameters are initial crack depth, neutron fluence, chemical composition of material (copper, nickel and phosphorous) and $RT_{NDT}$. The deterministically calculated $K_I$ and crack tip temperature are used for the probabilistic calculation. Using Monte Carlo simulation, the crack initiation probability for fixed flaw and PNNL(Pacific Northwest National Laboratory) flaw distribution is calculated. As the results show initiation probability of fixed flaw is much higher than that of PNNL distribution, the postulated crack sizes of 1/10t in this paper and 1/4t of ASME are evaluated to be very conservative.

• Tunnel and Underground Space
• /
• v.6 no.2
• /
• pp.157-165
• /
• 1996

In order to analyze the effects of ground vibration caused by underground blasting having an effect on structure, the particle velocity and acceleration are calculated by using DYNPAK program. The DYNPAK program analyzes nonlinear transient dynamic problem and adopts the very popular and easily implemented, explicit, central difference scheme. In this program, the material behavior is assumed to be elasto-viscoplastic. Using the particle acceleration history, modal analysis method is applied to the forced vibration response of multiple-degree-of-freedom(MDOF) systems using unclupled equations of motion expressed in terms of the system's natural circular frequencies and modal damping factors. AS a means of evaluating the vibration behavior of building structure subjected to underground blasting, the time response of the displacements relative to the ground of five-story building is determined. It is concluded that the amount of explosives consumed per round, the location of structure, the properties of rock medium, the stiffness fo structure, etc. act on the important factors influencing on the safety of building and that the response of a structure subjected to a forced excitation can usually be obtained with reasonable accuracy by the modal analysis of only a few mode of the lower frequencies of the system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.3
• /
• pp.193-199
• /
• 2015

Active thermography techniques have the capability of inspecting a broad range simultaneously. By evaluating the phase difference between the defected area and the healthy area, the technique indicates the qualitative location and size of the defect. Previously, the development of the defect detection method used a variety of materials and the test specimen was done. In this study, the proposed technique of lock-in is verified with artificial specimens that have different size and depth of subsurface defects. Finally, the defect detection capability was evaluated using comparisons of the phase image and the amplitude image according to the size and depth of defects.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.493-498
• /
• 1997

The purpose of this study is to develop geostatistical model for evaluating the abundance of deep-sea manganese nodule. The abundance data used in this study were obtained from the KODOS (Korea Deep Ocean Study) area. The variation of nodule abundance was very high within short distance, while sampling methods was very limited. As the distribution of nodule abundance showed non-gaussian, indicator simulation method was used instead of conditional simulation method and/or ordinary kriging. The abundance data were encoded into a series of indicators with 6 cutoff values. They were used to estimate the conditional probability distribution function (cpdf) of the nodule abundance at any unsampled location. The standardized indicator variogram models were obtained according to variogram analysis. This SIS method had the advantage over other traditional techniques such as the turning bands method and ordinary kriging. The estimating values by indicator conditional simulation near high abundance area were more detailed than by ordinary kriging and indicator kriging. They also showed better spatial characteristics of distribution of nodule abundance.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.8 no.1
• /
• pp.11-15
• /
• 2015

A subperiosteal ganglion is a very rare benign soft tissue tumor characterized by mucoid degeneration and cyst formation within the periosteum, which may results in cortical erosion. When evaluating a periosteal mass in out-patient clinic, ultrasonography can be used to define the location and cystic nature of the subperiosteal ganglion. A 48 years old woman had two month history of the protruding mass over the anteromedial aspect of right proximal tibia. Ultrasonography was used for the diagnosis of the subperiosteal ganglion in out-patient clinic and mass was excised uneventfully. We report the case of a subperiosteal ganglion of the proximal tibia with literature review.

• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.387-406
• /
• 2016

The main purpose of this paper is to determine the dynamic characteristics and the structural stability of the two approach viaducts of the Bosphorus Suspension Bridge under the expected stresses that would be caused during earthquake conditions. The Ortakoy and the Beylerbeyi approach viaducts constitute the side spans of the bridge at two locations. The bridge's main span over the Bosphorus is suspended, whereas they are supported at the base at either end. For the numerical investigation of the viaducts, 3-D computational structural finite element-FE models were developed. Their natural frequencies and the corresponding mode shapes were obtained, analyzed, presented and compared. The performances of the viaducts, under earthquake conditions, were studied considering the P-Delta effects implementing the push-over (POA) and the non-linear time-history analyses (NTHA). For the NTHA, three earthquake ground motions were generated depending on the location of the bridge. Seismic performances of the viaducts were determined in accordance with the requirements of the Turkish Seismic Code for the Earthquake Design of Railways Bridges (TSC-R/2008) and those of Caltrans (CALTRANS-2001) given for Seismic Design of Steel Bridges, separately. Furthermore, the investigation was extended for evaluating the possible need for retrofitting in the future. After the analysis of the resultant data, a retrofit recommendation for the viaducts was presented.

• Journal of Institute of Convergence Technology
• /
• v.9 no.1
• /
• pp.31-36
• /
• 2019

After 30 years of KKP model analysis and extended 30 years of accuracy analysis, the unique correlation and various problems between measured horizontal surface insolation and measured weather data are found in this paper. The KKP model's 10yrs daily total horizontal surface insolation forecasting was averaged about 97.7% on average, and the forecasting accuracy at peak times per day was about 92.1%, which is highly applicable regardless of location and weather conditions nationwide. The daily total solar radiation forecasting accuracy of the modified KKP cloud model was 98.9%, similar to the KKP model, and 93.0% of the forecasting accuracy at the peak time per day. And the results of evaluating the accuracy of calculation for 30 years of KKP model were cloud model 107.6% and cloud model 95.1%. During the accuracy analysis evaluation, this study found that inaccuracies in measurement data of cloud cover should be clearly assessed by the Meteorological Administration.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.29-37
• /
• 2002

Many of the traffic accidents on roads are a result of alignment defect of the roads. This alignment of the road needs to lie analyzed with accuracy for improving design of road, and it needs the design drawing of road, and coordinates of the main point. Accordingly, in this study the precision of location based on existing design drawing was compared with the data acquired by the combination of RTK GPS/GLONASS. The result of study is included within range 5cm, we would like to propose an effective and useful approach method to utilize the satellite for road alignment information system by evaluating the represented road alignment.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.26-28
• /
• 2006

When materials such as metal are into the secondary side of steam generator, they, so called foreign objects, may have influences on the integrity of the steam generator tubes. They cause the tube wear due to the relative motion between the tubes and foreign objects and the tube impact due to flow. The best way to avoid the effects is to remove all the foreign objects. However, it is not easy to remove the foreign materials thoroughly due to their condition such as the location. Considering the wear and impact by the foreign materials, KEPRI(Korea Electric Power Research Institute) developed the methodology to evaluate the foreign materials analytically. This methodology was described with a computer program in order to obtain the fast results. The program informs whether the tubes have the structural integrity when the foreign material strikes the tubes. Moreover, this gives us the remaining life of the steam generator tubes. In this paper, the program, which evaluates the effects of the foreign objects in the secondary side of steam generator, is introduced.