• 한국통신학회논문지
• /
• 제36권1A호
• /
• pp.41-48
• /
• 2011

This paper proposes an efficient code acquisition scheme for direct-sequence spread spectrum (DSSS) based real-time locating systems (RTLS). The proposed scheme employs multiple bit integration to significantly decrease false alarms when no packet signal is transmitted and increase the detection probability when the RTLS tags are excited. The performance of the proposed code acquisition scheme is analyzed and numerically evaluated, and compared with those of single-dwell and traditional double-dwell code acquisition schemes. The simulation results show that the proposed multiple-bit integration scheme outperforms single-dwell and double-dwell schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.145-147
• /
• 2002

In this paper, the improved fault locating method using distributed parameter which calculating the reduced voltage and current according to the ground capacitance in long transmission line was proposed. For the purpose of the fault locating algorithm non influenced source impedance, the loop method was used in the system modeling analysis. To enhance the fault locating, zero sequence of the fault current which is variable according to ground capacitance was not used but positive and negative sequence. System model was simulated using EMTP software. To verify the accuracy of proposed method, in different cases 64 sampled data per cycle was used and 160km and 300km long transmission line has fault resistance $0{\Omega}\;and\;100{\Omega}$ respectively was compared.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.200-207
• /
• 2007

The passive direction finding cross localization method is widely adopted in passive tracking, therefore there will exist masses of false intersection points. Eliminating these false intersection points correctly and quickly is a key technique in passive localization. A new method is proposed for passive locating and tracking multi-jammer target in this paper. It not only solves the difficulty of determining the number of targets when masses of false intersection points existing, but also solves the initialization problem of elastic network. Thus this method solves the problem of multi-jammer target correlation and the elimination of static false intersection points. The method which dynamically establishes multiple hypothesis trajectory trees solves the problem of eliminating the remaining false intersection points. Simulation results show that computational burden of the method is lower, the elastic network can more quickly find all or most of the targets and have a more probability of locking the real targets. This method can eliminate more false intersection points.

• 드라이브 ㆍ 컨트롤
• /
• 제9권3호
• /
• pp.29-36
• /
• 2012

The hydraulic cylinder is used for actuating the roller-link type rotating floodgate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to the limited space and determined to minimize the cylinder force necessary for actuating the floodgate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the support link. Therefore there exist three design variables to be determined to minimize the cylinder force within the rotating range of floodgate. First, the mathematical model of the roller-link type rotating floodgate is derived to find the cylinder force corresponding to the floodgate angle. Then, the optimal locating point of hydraulic cylinder is searched using the complex method that is one kind of constrained direct search method.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.170-176
• /
• 2005

The hydraulic cylinder is used for actuating the sluice gate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to limited space and determined to minimize the cylinder force necessary for actuating the sluice gate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the gate plate when it is fully opened. Therefore there exist three parameters to be determined to minimize the cylinder force in the operation range of sluice gate. The optimal locating points of hydraulic cylinder are obtained using the complex method that is one kind of constrained direct search m method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권4호
• /
• pp.1553-1567
• /
• 2021

Steganography is a current hot research topic in the area of information security and privacy protection. However, most previous steganography methods are not effective against steganalysis and attacks because they are usually carried out by modifying covers. In this paper, we propose an improved coverless text steganography algorithm based on pretreatment and Part of Speech (POS), in which, Chinese character components are used as the locating marks, then the POS is used to hide the number of keywords, the retrieval of stego-texts is optimized by pretreatment finally. The experiment is verified that our algorithm performs well in terms of embedding capacity, the embedding success rate, and extracting accuracy, with appropriate lengths of locating marks and the large scale of the text database.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.210-213
• /
• 2017

The construction industry has witnessed an exponential growth of drones used in the field over the past few years. Likewise, the field of maintenance has paid increasing attention to using drones with a view to improving the efficiency of condition checks in high-rise buildings and major space. Although operators manipulate drones to inspect buildings at present, drones are expected to autonomously move around without operators in a few years. Also, for indoor maintenance, it is important for drones to find accurate locations, which is implemented by real-time locating systems(RTLS). Yet, the accuracy of RTLS varies across the types of systems and indoor settings, which warrants a locating system suitable for indoor space and a location correction system designed to improve the accuracy. Hence, the current study investigated the accuracy of real-time locating systems(RTLS) for the maintenance of indoor space of buildings with drones and delved into the methods of correcting the location information to improve the accuracy of RTLS.

• 한국건설관리학회논문집
• /
• 제11권2호
• /
• pp.106-115
• /
• 2010

최근 건설 산업의 규모가 대규모, 초고층화 됨에 따라 공기단축, 원가절감, 품질항상 등의 각종 관리 분야에 대한 더욱 능률적인 관리 방법이 요구되고 있다. 이러한 요구사항과 맞물려 현재 건설 산업에서는 이를 지원하기 위한 방법의 일환으로 IT산업과의 연계를 통한 해결책이 점차 설득력을 얻어하고 있다. 최근 Bar Code, Personal Digital Assistant(PDA), Global Positioning System(GPS), Radio Frequency Identification(RFID) 등의 다양한 IT기술들이 그 해결방안으로 개발되고 있다. 본 연구는 이러한 다양한 IT기술 중, 최근 여러 분야에 대한 적용 가능성을 인정받은 실시간 위치추적 기술(RTLS)에 대해 분석하고, 이를 바탕으로 건설 현장에 적용 가능한 위치추적 기술을 개발하며, 검증하고자 한다. 본 연구에서 개발하고자 하는 위치추적 기술은 작업자 및 기인물의 실시간 관리를 통하여 재해를 예방하기 위한 것으로 추후 안전관리 분야에 효과적인 적용 가능성을 예상하며, 이 외에도 건설 현장에 적합한 위치추적 기술이 개발된다면 건설 자재 실시간 모니터링 분야, 건설 자동화 분야, 건설 품질 분야, 유지 관리 분야 등에 있어서도 효과적인 적용이 가능할 것으로 예상된다.

• ETRI Journal
• /
• 제29권2호
• /
• pp.249-251
• /
• 2007

A novel idea is presented to locate intersections in a video sequence captured from a moving vehicle. More specifically, we propose a Bayesian network approach to combine evidence extracted from a video sequence and evidence from a database, maximizing evidence from various sensors in a systematic manner and locating intersections robustly.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.604-608
• /
• 2012

열차의 위치는 전통적으로 궤도회로를 사용하여 검지하였으나 CBTC와 같은 최근의 열차제어 시스템은 지상신호설비를 최소화 하기 위하여 궤도회로를 사용하지 않고 열차를 검지하는 방식을 사용한다. 따라서 궤도회로를 사용하지 않고 열차의 정확한 위치를 검지하는 시스템에 대한 관심이 증대되고 있다. 또한 기존의 궤도회로 사용구간에도 단락감도 저하시 안정적으로 열차검지를 위하여 비접촉식 열차검지장치를 보완 설치한다. 본 논문은 비 접촉식 열차검지기 장치의 일종으로 자기장의 변화에 따른 전류위상차를 이용하여 열차검지시스템을 설계하고 시제품을 제작하여 열차검지 성능과 설계조건 등을 판단하였으며, 기존 궤도회로장치에 비하여 다양한 장점이 있음을 알 수 있었다.