• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.409-416
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to tunnel collapses. A failure mode is one of the critical factors in the conventional methods of stability analysis. Therefore identification of failure modes is essential in securing safe construction in the phase of design analysis, instrumentation planning and implementation of reinforcing measures. In this study failure modes at the tunnel heading in granular soils are investigated using physical model tests and numerical simulation for various tunnel depths and ground surface inclinations. Test results indicated that the effect of depth and inclination of ground surface on a failure mode are significant. It is identified that, with an incase in depth, failure modes become localized in a region close to the tunnel. It is also known that an increase in the inclination of ground surface results in inclined and wide failure modes.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.78-85
• /
• 2002

The wavelet transform is a popular tool fer studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.242-248
• /
• 2021

Unforeseen failures of boilers in power plants may affect the continuation of electricity generation. Main failures in boilers are influenced by the tube material, tube position, boiler service temperature and pressure, and chemical composition of the feed water and coal. This investigation was intended to find answers on the causes and mechanism of failure of the fire-side boiler water-wall tubes, due to perforation and corrosion. The tube conformed to the material requirements in terms of its chemical composition and hardness. Microscopic examination showed ferrite and pearlite indicating no changes in its microstructure due to the temperature variation. SEM test showed a single layer and homogenous film density particularly on the area far from perforation. However, layers of corrosion product were formed on the nearby perforation area. EDX showed that there were Na, Ca, S, and O elements on the failed surface. XRD indicated the presence of Fe₂O₃ oxide. The failure mechanism was identified as a result of significant localized wall thinning of the boiler water wall-tube due to oxidation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.846-853
• /
• 2005

The whole death by disaster is totalized to 1,515 person from 1993 to 2004 year in our country. In this section life damages by landslide is totalized 357 people(about 24% of whole life damage). About 36 people are died by landslide(such as cutting area failure every year). Kangwon-do need a lot of interests and prevention because dangerous area that landslide occurrence is more than other area at summer localized downpour or thawing season and there is landslide occurrence possibility area more than other area. Kangwon-do area is higher than other area in natural disaster incidence and damage scale because topography and a lot of rainfalls by summer localized in Kangwon-Do than other area. In this study, dangerous area of landslide occurrence possibility is analyzed and compared Kangwon-Do with other areas in our country. as a result, every year we have experienced landslide occurrence and natural disaster. accordingly, we urgently need to prevent landslide occurrence and natural disaster by analy-zed source about landslide occurrence and condition of disaster in Kangwon-Do and suitable engineering method and construction work.

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.827-836
• /
• 2016

The rate of softening is an important factor to determine whether the failure occurs along localized shear band or in a more diffused manner. In this paper, strength loss and softening rate effect depending on sensitivity are investigated for weakly cemented clays, for both artificially cemented high plasticity San Francisco Bay Mud and low plasticity Yolo Loam. Destructuration and softening behavior for weakly cemented sensitive clays are demonstrated and discussed through multiple vane shear tests. Artificial sensitive clays are prepared in the laboratory for physical modeling or constitutive modeling using a small amount of cement (2 to 5%) with controlled initial water content and curing period. Through test results, shear band thickness is theoretically computed and the rate of softening is represented as a newly introduced parameter, ${\omega}_{80%}$. Consequently, it is found that the softening rate increases with sensitivity for weakly cemented sensitive clays. Increased softening rate represents faster strength loss to residual state and faster minimizing of shear band thickness. Uncemented clay has very low softening rate to 80% strength drop. Also, it is found that higher brittleness index ($I_b$) relatively shows faster softening rate. The result would be beneficial to study of physical modeling for sensitive clays in that artificially constructed high sensitivity (up to $S_t=23$) clay exhibits faster strain softening, which results in localized shear band failure once it is remolded.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.69-81
• /
• 2013

Maintaining connectivity is essential in multi-hop wireless networks since the network topology cannot be pre-determined due to mobility and environmental effects. To maintain the connectivity, a critical point in the network topology should be identified where the critical point is the link or node that partitions the network when it fails. In this paper, we propose a new critical point identification algorithm and also present numerical results that compare the critical points of the network and H-hop sub-network illustrating how effectively sub-network information can detect the network-wide critical points. Then, we propose two localized topological control resilient schemes that can be applied to both global and local H-hop sub-network critical points to improve the network connectivity and the network resilience. Numerical studies to evaluate the proposed schemes under node and link failure network conditions show that our proposed resilient schemes increase the probability of the network being connected in variety of link and node failure conditions.

• 터널과지하공간
• /
• 제17권5호
• /
• pp.389-410
• /
• 2007

불연속면의 빈도가 높지 않은 견고한 암반의 경우 굴착시 공동 주변 영역에서의 파괴나 변형 특성은 형성되어 있는 초기응력 조건과 강도 특성에 절대적인 영향을 받는다. 과도한 초기응력장은 굴착 공동 주변에 점진적이고 국부적인 취성파괴를 유발시킴으로서 시공의 안정성과 경제성을 확보하는데 장애요인으로 작용할 수 있다. 이 논문에서는 응력 수준과 터널형상에 따른 공동 주변의 취성파괴 거동 특성을 파악하기 위해 축소된 터널 시험체를 이용한 이축압축시험과 입자 결합모델을 이용한 개별요소법의 일종인 $PFC^{2D}$ 해석에 의한 연구를 수행하였다. 실내 이축압축시험을 통해 취성파괴의 발생 영역과 형태 면에서 실제 암반 공동 주변에서 발생된 파괴 특성과 유사한 파괴 거동을 모사할 수 있었다. 모형시험체에 대한 이축압축시험 결과 최소 주응력 방향의 공동 단면 곡선부에서는 균열이 표면에서 개시된 후 내부로 진행되어 국부적인 노치형 파괴영역이 형성되었다. 이에 비해 모서리와 직선부의 경우 공벽 표면과 내부에서 발생된 균열들의 상호 연결, 결합에 의해 대규모의 노치형 분리면이 유도되고 곡선부에 비해 큰 파괴영역이 형성되는 것으로 조사되었다.

• Tuberculosis and Respiratory Diseases
• /
• 제50권6호
• /
• pp.740-746
• /
• 2001

Background : A 35-year-old woman was admitted to the emergency room with sudden dyspnea that developed one day prior. The initial Chest X-ray showed multiple bullous changes at the right middle and lower lung field and long standing fibrotic tuberculous changes at the right upper lung field. The left lung field was totally collapsed by an fibrotic old tuberculous lesion. In spite of supportive medical care with oxygen therapy after admission, the radiographic lesions were no significant change but the respiratory distress had worsened. The patient suffered respiratory failure and received mechanical ventilatory support. The HRCT showed a localized tension pneumothorax mimicking multiple giant bullae at the right lower lung field. Immediately after a closed thoracostomy with a 32 French chest tube and air drainage, her vital signs and dyspnea were gradually improved. The patient was successfully weaned from mechanical ventilation after 5 days of mechanical ventilatory support. The patient had received talc pleurodesis through a chest tube to prevent the recurrence of the life-threatening localized pneumothorax. The patient was discharged without recurrence of the pneumothorax.

• 전산구조공학
• /
• 제10권3호
• /
• pp.241-250
• /
• 1997

콘크리트에 발생하는 변형률 국소화는 연화거동에 수반하여 변형이 국부적으로 집중되는 현상으로 이를 유한요소해석 할 수 있는 일관된 알고리즘을 개발하는 것이 본 연구의 목적이다. 변형률 국소화현상이 발생한 콘크리트는 변형률이 집중되는 국소화영역과 그외의 영역인 비국소화영역으로 크게 구분할 수 있으며 국소화영역에서는 연화현상을 포함하는 탄소성거동을 하게 되며 비국소화영역은 손상제하거동을 수반하게 된다. 변형률 국소화현상이 진행중인 콘크리트의 국소화영역을 모델링하기 위하여 열역학적으로 정식화된 전형적인 소성모델에 콘크리트의 극한응력 이후에 비선형 연화로 표현되는 소성거동을 고려할 수 있는 일반화된 Drucker-Prager모델을 도입하였으며 소성이론식의 적분을 위해 return-mapping 알고리즘을 사용하고 일관된 알고리즘을 전개하였다. 또한, 콘크리트의 비국소화영역의 모델링을 위하여 열역학적 자유에너지함수를 수정하여 비선형 탄성 및 손상의 일관된 알고리즘을 전개하였다. 개발된 알고리즘에 의한 유한요소해석을 통해 압축을 받는 콘크리트 부재의 변형률 국소화 현상을 해석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.253-262
• /
• 2010

In this study, localized heavy rainfall occurred during the collapse of steep slopes adjacent to the construction site and to ensure the safety of residents to build an early warning system was performed. Forecast/Alert range was estimated based on vulnerability landslide map and past disaster history. And established a critical line in consideration of the characteristics of local rainfall and operating a snake line, the study calculated causing and non-causing points. Also, be measured in real-time analysis of rainfall data in conjunction with the system before the steep slope failure occurred forecast/Alert System is presented.