• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.3-6
• /
• 2004

This paper. we investigate the OFDM-based wireless LAN systems operating in the 60 GHz frequency band as part of the fourth-generation (4G) systems. The 60 GHz band is of much interest since this is the band in which a massive amount of spectral space (5 GHz) has been allocated worldwide for dense wireless local communications. This paper gives an overview of 60 GHz indoor wireless channel characteristics and an effect on phase noise. The performance of OFDM system is severely degraded by the local oscillator phase noise, which causes both common phase error and inter-carrier interference. We provide the exact analysis of the phase noise effect on the OFDM system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.172-175
• /
• 2001

A novel microstrip type low-pass filter using thin or thick film resistors is proposed to efficiently eliminate harmonic spurious response in stop-band. The proposed low-pass filter shows the spurious suppression enhancement of 20 dB over a conventional one. The designed low-pass filter could be used as a harmonic rejection filter of a local oscillator for Ku-band satellite payload system.

• 한국ITS학회 논문지
• /
• 제16권5호
• /
• pp.152-161
• /
• 2017

CBTC의 통신기술은 IEEE 802.11.x 표준을 사용하고 있으며 ISM밴드 대역중 하나인 2.4GHz를 사용하게 된다. 따라서 CBTC 철도 무선시스템으로서는 통신 지연, 통신 왜곡 및 정보 손실 등이 발생 할 수 있다. 이러한 문제를 극복하기 위해 ISM 대역중 908MHz 일정진폭을 갖는 직접 시퀀스 확산스펙트럼 송신기를 제안하였다. 성능 분석을 위해 주요파라미터인 아이 다이아그램과 scatter diagram을 고려하여 특성 분석을 하였다. 또한 국부발진 신호의 위상잡음 특성은 약 60dBc/Hz로서 기준신호와 비교 시 특성이 상당히 우수함을 알 수 있었다. 또한 2차 국부 발진 신호의 기준 주파수 억압이 50dB이하가 됨을 알 수 있었다. 제안한 변조방법에서 보조신호는 양과 음의 발생확률을 균일하게 함으로써 출력스펙트럼에서의 선스펙트럼성분에 의한 간섭을 제거하였으며 비선형 증폭기를 통과한 후의 스펙트럼의 측대파의 재생율이 현저히 줄어들었음을 볼 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.456-465
• /
• 2006

The problem of recursive filtering far linear discrete-time systems with uncertainties is considered. A new suboptimal filtering algorithm is herein proposed. It is based on the fusion formula, which represents an optimal mean-square linear combination of local Kalman estimates with weights depending on cross-covariances between local filtering errors. In contrast to the optimal weights, the suboptimal weights do not depend on current measurements, and thus the proposed algorithm can easily be implemented in real-time. High accuracy and efficiency of the suboptimal filtering algorithm are demonstrated on the following examples: damper harmonic oscillator motion and vehicle motion constrained to a plane.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.23-31
• /
• 2022

Heterodyne efficiency is an indicator to evaluate the performance of space coherent laser communication systems. It is affected by signal light and local oscillator (LO) light amplitude, phase and polarization state. In this paper, based on the common heterodyne efficiency, a heterodyne efficiency model that can reflect polarization aberration of optical system is proposed. The heterodyne efficiency is analyzed when the signal light and the LO light are linearly polarized or circularly polarized. For a coherent communication optical system, when the incident signal light is right-circularly polarized light and the incident LO light is 45° linear polarized light. Based on the three-dimensional ray tracing theory and the heterodyne efficiency proposed in this paper, the change of polarization states and the distribution of heterodyne efficiency of the signal light and LO light influenced by the optical system's polarization aberration are analyzed. Analysis shows that the heterodyne efficiency model proposed in this paper can be used to evaluate coherent communication systems and reflect the influence of optical system polarization aberration.

• 천문학회지
• /
• 제41권3호
• /
• pp.77-81
• /
• 2008

As a continuation of a previous work by Park et al. (2006), we have developed a two-element radio interferometer that can measure both the phase and amplitude of a visibility function. Two small radio telescopes with diameters of 2.3 m are used as before, but this time an external reference oscillator is shared by the two telescopes so that the local oscillator frequencies are identical. We do not use a hardware correlator; instead we record signals from the two telescopes onto a PC and then perform software correlation. Complex visibilities are obtained toward the sun at ${\lambda}\;=\;21\;cm$, for 24 baselines with the use of the earth rotation and positional changes of one element, where the maximum baseline length projected onto UV plane is ${\sim}\;90{\lambda}$. As expected, the visibility amplitude decreases with the baseline length, while the phase is almost constant. The image obtained by the Fourier transformation of the visibility function nicely delineates the sun, which is barely resolved due to the limited baseline length. The experiment demonstrates that this system can be used as a "toy" interferometer at least for the education of (under)graduate students.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권1호
• /
• pp.11-20
• /
• 2016

In this paper, a system that can collect GPS L1 C/A, GLONASS G1, and BDS B1I signals with single front-end receiver was implemented using a universal software radio peripheral (USRP) and its performance was verified. To acquire the global navigation satellite system signals, hardware was configured using USRP, antenna, external low-noise amplifier, and external oscillator. In addition, a value of optimum local oscillator frequency was selected to sample signals from three systems with L1-band with a low sampling rate as much as possible. The comparison result of C/N0 between the signal collection system using the proposed method and commercial receiver using double front-end showed that the proposed system had 0.7 ~ 0.8dB higher than that of commercial receiver for GPS L1 C/A signals and 1 ~ 2 dB lower than that of commercial receiver for GLONASS G1 and BDS B1I. Through the above results, it was verified that signals collected using the three systems with a single USRP had no significant error with that of commercial receiver. In the future, it is expected that the proposed system will be combined with software-defined radio (SDR) and advanced to a receiver that has a re-configuration channel.

• 전기전자학회논문지
• /
• 제3권1호
• /
• pp.79-85
• /
• 1999

본 논문에서는 5.8GHz 무선 LAN용 저항성 주파수 변환기를 설계 제작하였다. 저항성 주파수 변환기는 구조가 간단하고 기저대역에서 잡음성능과 선형성이 우수한 특성을 나타낸다. 주파수 변환에 사용되는 국부 발진기는 유전체 공진기를 이용하여 안정된 발진 전력을 얻을 수 있도록 하였다. 또한, 발진 주파수를 조정하기 위해 버렉터 다이오드를 사용하여 전기적인 튜닝이 가능하도록 하였다. 본 논문에서 제작한 저항성 믹서는 선로손실을 제외하고 약 -12dB의 변환손실을 얻었으며, 국부 발진기의 출력은 1.67dBm을 얻었다.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.17-23
• /
• 2004

본 논문에서는 전 디지털 모뎀의 기저 대역 전송 신호를 IF 출력 신호로 주파수 변환하는 모듈에서 발생하는 국부발진 누설 신호를 역 위상 기법을 사용하여 제거하고, aperture 개방형 루프 공진기로 구성되는 광대역 필터를 구성하여 낮은 군지연과 높은 대역 제한 특성을 갖는 광대역 IF 인터페이스 모듈을 설계하고 제작하였다. 45 Mbps 및 155 Mbps 전 디지털 모뎀을 위한 광대역 IFIU는 전송 대역과 밀접하여 간섭 신호로 작용하는 국부발진 신호의 누설 신호를 -60 dBc 이하로 억압하였으며, 각각의 전송율에 대한 IFIU의 군 지연은 15 ns와 8 ns의 낮은 특성으로 구현하였다. L-대역 중심 주파수와 150 MHz 대역통과 특성을 갖는 모듈의 이득 평탄도는 2 dB 이내의 특성으로 광대역 위성통신 시스템 전송에 필요한 요구 조건을 만족하였다.