• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.334-341
• /
• 2019

This study proposes the control strategy for the seamless mode transfer of indirect current controlled parallel grid-connected inverters. Under the abnormal grid condition, the grid-connected inverter can convert the operation mode from grid-connected to stand-alone mode to supply power to the local load. For a seamless mode transfer, the time delay problems caused by the accumulated control variable error must be solved, and the indirect current control method has been applied as one of the solutions. In this study, the design of control parameters for the proportional-resonant-based triple-loop indirect current controller and the control strategy for the seamless mode transfer of parallel grid-connected inverters are described and analyzed. The validity of the proposed mode transfer method is verified by the PSiM simulation results.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.90-95
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear power plant. In pipes of energy plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale welded and unwelded carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. The observed failure modes were divided into four types; ovalization, crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strengths of welded and unwelded piping system with local wall thinning were evaluated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.211-216
• /
• 1997

The mode localization phenomenon in non-periodic multispan beam is theoretically investigated. When localization occurs, the free vibration amplitude of a normal mode becomes confined to a local region of the structure. It is well known that the weakly coupled periodic structures are sensitive to certain types of periodicity-breaking disorder, resulting in the mode localization. The results of this study indicate that the mode localization occurs also in nonperiodic structures and the degrees of mode localization of some modes are very sensitive to system parameters. Free vibration analysis of simply supported two-span beams of arbitrary span lengths is performed. Degrees of mode localization and their sensitivities to system parameters are appraised by considering the characteristic graph and the structural line defined in this study first.

• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.29-49
• /
• 2000

The purposes of this study are to identify the characteristics of inner-city industrial community and to analyse the subsistence mode of small manufacturing enterprises in the industrial community in Taegu Metropolitan area. The case study area, Nowon 1. 2-ga dong, is the typical inner city industrial community, adjacent to old industrial complex, which was recently transformed from semi -industrial to semi-residential zoning district. Now there are many old one story housing, newly constructed multi stories housing and many small factories of metal and machinery products. The conflicts of between residents and small business owners are not serious but latent. The subsistence mode of small manufacturing enterprises in this area is characterized as the network production system. The main attributes of this mode are local integration, horizontal subcontracting and strong industrial linkages in production processes and transactions. These transactions are mainly made by face-to-face contacts. The small business owners' local social networks are seen as series of units which are interconnected through various types of social and business relations. They exchange business information as using social networks. In addition, the majority of them join local social clubs with their local business counterpartners. Finally, the locational advantages of inner-city industrial community are production network, different industrial linkages and characteristic industrial milieu such as social solidarity, informal labor market and incubator effects. But these advantages are being challenged from the contradiction between capital and laned property and the urban gentrification policy. Accordingly, there should be positive redevelopment policy considering the subsistence mode of small business in these areas.

• The Korean Journal of Applied Statistics
• /
• v.26 no.2
• /
• pp.335-347
• /
• 2013

There are various types of real world signals. For example, an electrocardiogram(ECG) represents myocardium activities (contraction and relaxation) according to the beating of the heart. ECG can be expressed as the fluctuation of ampere ratings over time. A signal is a composite of various types of signals. An orchestra (which boasts a beautiful melody) consists of a variety of instruments with a unique frequency; subsequently, each sound is combined to form a perfect harmony. Various research on how to to decompose mixed stationary signals have been conducted. In the case of non-stationary signals, there is a limitation to use methodologies for stationary signals. Huang et al. (1998) proposed empirical mode decomposition(EMD) to deal with non-stationarity. EMD provides a data-driven approach to decompose a signal into intrinsic mode functions according to local oscillation through the identification of local extrema. However, due to the repeating process in the construction of envelopes, EMD algorithm is not efficient and not robust to a noise, and its computational complexity tends to increase as the size of a signal grows. In this research, we propose a new method to extract a local oscillation embedded in a signal by utilizing the second derivative.

• Korean Management Science Review
• /
• v.28 no.1
• /
• pp.91-105
• /
• 2011

Among various types of creativity, team creativity has been always receiving attention from both practitioners and researchers because most of works are done in a team format in organizations. Therefore, it would be the best way for corporate performance to increase when team creativity is managed carefully to increase in a steadfast way. Though there are lots of ways to grow team creativity, this study explores the issue of increasing the team creativity by adopting CMC (computer-mediated communication) and exploration and exploitation, which were studied separately, but never analyzed together in the same research framework. Experiments to prove the validity of the research questions are based on ABM (Agent-Based Modeling) simulation. Netlogo language was adopted to build a prototype engine for the simulation engine. Experiment results revealed that in the short-term, both broad CMC mode with high exploration and exploitation, and local CMC mode with high exploration and exploitation result in higher team creativity than other types of combination. However, in the long run, broad CMC mode yields higher team creativity level than local CMC mode.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.61-66
• /
• 2001

Fracture behaviors of pipes with local wall thinning is very important for the integrity of nuclear power plant. In pipes of energy plants, sometimes, the local wall thinning may result from severe drosion-corrosion damage. However, effect of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization, ovalization+cracking, local buckling and local buckling+cracking. Also, maximum load was successfully evaluated.

• Geomechanics and Engineering
• /
• v.11 no.2
• /
• pp.253-267
• /
• 2016

The stability of surrounding rock will be poor when the tunnel is excavated through nearly horizontal stratum. In this paper, the instability mechanism of local nearly horizontal stratum in super-large section and deep buried tunnel is revealed by the analysis of the macro failure and micro fracture. A structural model is proposed to explain the mechanics of surrounding rock collapse under the action of stress redistribution and shed light on the macroscopic analytical approach of the stability of surrounding rock. Then, some highly effective formulas applied in the tunnel engineering are developed according to the theory of mixed-mode micro fracture. And well-documented field case is made to demonstrate the effectiveness and accuracy of the proposed analytical methods of mixed-mode fracture. Meanwhile, in order to make the more accurate judgment about yield failure of rock mass, a series of comprehensive failure criteria are formed. In addition, the relationship between the nonlinear failure criterion and $K_I$ and $K_{II}$ of micro fracture is established to make the surrounding rock failure criterion more comprehensive and accurate. Further, the influence of the parameters related to the tension-shear mixed-mode fracture and compression-shear mixed-mode fracture on the propagation of rock crack is analyzed. Results show that ${\sigma}_3$ changes linearly with the change of ${\sigma}_1$. And the change rate is related to ${\beta}$, angle between the cracks and ${\sigma}_1$. The proposed simple analytical approach is economical and efficient, and suitable for the analysis of local nearly horizontal stratum in super-large section and deep buried tunnel.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.19-27
• /
• 2019

The consumption of liquefied natural gas (LNG) has increased annually due to the strengthening of international environmental regulations. In order to produce stable and efficient LNG, it is essential to divide the global (overall) operating condition and construct a quick and accurate monitoring system for each operation condition. In this study, multi-mode monitoring system is proposed to the LNG plant fractionation process. First, global normal operation data is divided to local (subdivide) normal operation data using global principal component analysis (PCA) and k-means clustering method. And then, the data to be analyzed were matched with the local normal mode. Finally, it is determined the state of process abnormality through the local PCA. The proposed method is applied to 45 fault case and it proved to be more than 5~10% efficient compared to the global PCA and univariate monitoring.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.241-248
• /
• 2007

It is recently trend that local government which introduce the BIS is increasing steadily. Communication is inevitably necessary to offer a data of a collected bus position to transportation center and supply construed information. Until now, most BIS connection research is actively in data of collecting, processing, offer but Research is Relatively insufficient on communication mode to connect it. Therefore, this study is achieving applicable communication mode on BIS of present common use inning that communication mode. Study resulting, characteristic of BIS communication mode is analyzed that send-receive of short packet data happens frequently and It is inevitably necessary to synthetically analyze economical side, authoritativeness side of communication, introducing communication mode.